I searched for someone else having this problem to no avail. I am trying to back-up my copy of Disney's Tarzan (1999). I used DVDFab to decrypt, it said finished successfully, so I figured that much worked correctly. Now is where the problem happens. I used DVDShrink w/ Nero, the shrinking went fine when it tries to burn it says write error. O.K. next I tried DVD2one and burn with Nero, still throws up the same write error. I've tried about 2 diffrent types of blank DVD's just incase that was a problem. Thanks for any ideas.
@Burnt-Out Your best bet is to post the last nero log - has a lot of useful info. If using nero6 it can be found here: program files>ahead>nero>nerohistory.txt Or for Nero 7 program files>Nero>nero 7>Core>nerohistory.txt. Just make sure you edit out the serial # - begins w/ 1A
I'll do that as soon as possible, I'm at work right now. The graveyard shift it's a wonderful thing. What do you think about running it through VOB Blanker or is the movie to old for that sort of protection. Thanks again.
I've actually run into a few old movies that have copy protection that wouldn't allow me to rip. It could also be that the disc is in bad shape (scratches, and/or smudges), if the disc is in good shape, then try Vob Blanker, and see what happens...
As far as I can tell the disc is in good shape. It just will not burn no matter which program I use to compress it. DVD2one & DVDShrink both seem to compress fine no errors at all. Just when I try to burn it, Nero starts with the message about burning the Lead-In then it errors out.
As binkie requested post your failed Nero log, if you erroring out in the burn phase it could be other problems. What kind of media are you using, how fast are you burning, is your fw up to date, is your DMA turned on, are you multi-tasking, etc.?
Thanks guys and girls for all the help, sorry it took so long to post. I'm burning at 2.4x, no mutitasking, not sure about firmware it is GBHA. Here's the error log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM Nero Version: 6.6.0.6 (Nero Express) Recorder: <ATAPI DVD RW> Version: GBHA - HA 1 TA 0 - 6.6.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <FUNAI E2650 >Version: 1.01 - HA 1 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : QUANTUM Bigfoot TX12.0AT atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : FUNAI E2650 atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === ATAPI DVD RW E: CDRom0 FUNAI E2650 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 383MB (392688kB) Free physical memory: 129MB (132916kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2006 UDF/ISO compilation 10:45:32 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 10:45:32 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 10:45:32 AM #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 10:45:32 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 10:45:33 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:45:33 AM #6 Text 0 File Writer.cpp, Line 122 Writer ATAPI DVD RW running 10:45:33 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:45:33 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:45:33 AM #9 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 10:45:33 AM #10 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2219919 (493:18.69, 4335MB) 10:45:33 AM #11 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 10:45:33 AM #12 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: ATAPI DVD RW, Media type: DVD-R Disc Manufacturer: UME01 - Disc Application Code: 64, Disc Physical Code: 193 10:45:33 AM #13 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:45:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2219920 (2219920) = #2219920/493:18.70 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219920 blocks [ATAPI DVD RW] -------------------------------------------------------------- 10:45:33 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [ATAPI DVD RW] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4546396160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2219920 | lead-out | 1 | 0x41 | 0x00 10:45:33 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:45:33 AM #17 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 10:45:33 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:45:34 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:45:34 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:45:34 AM #21 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 10:45:34 AM #22 Text 0 File Mmc.cpp, Line 21116 Set BUFE: Seamless Link -> ON 10:45:34 AM #23 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 10:45:34 AM #24 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:46:11 AM #25 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x091F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 10:46:11 AM #26 CDR -1135 File Writer.cpp, Line 311 Write error 10:46:11 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:46:11 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:46:11 AM #29 Text 0 File DVDR.cpp, Line 2682 EndDAO: Last written address was -1 10:46:11 AM #30 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== THANKS to anyone who has any ideas!
@Burnt-Out Ok - here's what I can see: Update your Nero to 6.6.0.18 - this version w/ still work w/ shrink. You can download it here: http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe Nero's not fully recognizing your drive (make & model) and listing a generic. The update should help this. Can't find if your firmware is up to date cause of this. What is the make and model? The firmware may help but: Never heard of them - and their not on the 'A list' of media. They also why your getting this: The drive doesn't like your media. So your best bet is to switch to Taiyo Yuden or Verbatim and check and see if your firmware is up to date.
Thanks to everyone, especially you binkie7 for all your help. One last question though. My burner is an I/O Magic 16x DVD+ -RW DL with lightscribe. The Nero I use was supplied with the drive and also contains the lightscribe program, If I update Nero will I still have the ability to use the lightscribe program.
In Binkie7's absence I will advise you to do the update, you shouldn't experience any problems using your Lightscribe abilities, Cheers.
Thanks everyone i'm still trying to figure out whats wrong. I updated Nero to ver.6.6.1.4. Nero still dosen't reconize my type of DVD burner. I would update the firmware, but I'm clueless of how to do that. I looked up how to do firmware updates, it said something about finding my id string through Nero info tool, but all it says is "Atapi DVD RW". From what I read on the I/O Magic website it is suppost to tell me something diffrent. On the plus side this movie is the only one I ever had problms with, I've backed up every movie I own no problems. So you win some, you lose some I guess. Anyway, I probaly post more outcomes to my problem, I can't let it beat me. Thanks to everyone again. If it helps this is my burner: http://www.iomagic.com/Products/show_all_results.asp?ProdID=IDVD16DLS
@Burnt-Out The string it may be looking for is IDVD16DLS - don't know - I think I/O Magic is the site where you have to be registered to get the firmware but I could be wrong. Plus your drive is either made by Philips-BenQ or Lite-On and I can't find which model it would be for either one to know whcih firmware. If you want to auto burn w/ shrink you'll need to downgrade to 6.6.0.18. Uninstall the current version, run the nero clean tool then install 6.6.0.18 from the link above. Your best bet is too switch the media to Taiyo Yuden or Verbatim - problems will be minimal if any!
@ burnout, this is what i got when i checked ur burner. looks like a firmware update is needed, check this out...http://www.videohelp.com/dvdwriters.php?DVDname=IDVD16DLS&Submit=Search&cdrs=&cdrws=&dvdrs=&dvdrws=&dvdrsdl=&dvdprs=&dvdprws=&dvdprsdl=&dvdrams=&buffer=Any&cdrom=&dvdrom=&orderby=Name&hits=25&Search=Search&country=
If you compress it with DVD Shrink why not use shrink to burn it also as I have used shrink and have not had any problems with the program doing just that.
@Dogman5 DVD Shrink does not burn, it just compresses and rips. You need another program like Nero, DVD Decrypter or CopytoDVD which intergrate with Shrink and burn the file.
Well Ladies & Gents, through all your excellent help, I finally got Tarzan to burn. Not sure if it was the updated Nero or the diffrent type of dvd's I used, but anyway the Thanks goes to the people who kept responding to a noob like myself. @gamename: Thanks for the info on the firmware update, I'll check into that. Thanks again.
