DMA/CRC error with nero and tsstcorp t552u

Hi

I've been trying to burn a dvds using a samsung dvd writer (tsstcorp t552u) and each time I get a dma-driver error,crc error message, it then burns the dvd and hangs at the 100% completed.

I've tried several different times of media and had the same result.

Any help?

 

What brand of media are you using. Have you checked to see if your DMA is ON, heres a guide.
http://forums.afterdawn.com/thread_view.cfm/260038

If you dont have success then post a Nero log which you can find here, only the LAST one required

Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt

Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt

 

Thanks foe the reply.

The dma is on.


I've used ridiscs and last time I used bulkpaq which worked fine on my old philips writer on my other pc.

heres the log file
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.0.5.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U nvatabus Port 1 ID 1 DMA: Off
DiskPeripheral : Maxtor 6L160M0 nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 1 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 3 DMA: Off
CdRomPeripheral : KK1195Y MOR165R 1.0 dtscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
SCSIVAX DVD/CD-ROM F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
SCSIVAX DVD/CD-ROM I: CDRom3
SCSIVAX DVD/CD-ROM J: CDRom4
KK1195Y MOR165R K: CDRom8
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 635MB (651104kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.3.2006
ISO compilation
19:04:24 #1 Text 0 File Isodoc.cpp, Line 6414
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:04:24 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

19:04:24 #3 Text 0 File Reader.cpp, Line 124
Reader running

19:04:24 #4 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

19:04:24 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

19:04:24 #6 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

19:04:24 #7 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1655823 (367:57.48, 3234MB)

19:04:24 #8 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

19:04:24 #9 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:04:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1655824 (1655824) = #1655824/367:57.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1655824 blocks [Image Recorder]
--------------------------------------------------------------

19:04:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3391127552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1655824 | lead-out | 1 | 0x41 | 0x00

19:04:30 #12 Phase 65 File dlgbrnst.cpp, Line 1730
Burn process started

19:04:30 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:15:49 #14 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 1655824 (194410h), length 0 blocks

19:15:49 #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:15:49 #16 Phase 66 File dlgbrnst.cpp, Line 1730
Burn process completed successfully


Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 20:59:42 (Adapter driver for src)

 

ALL these need to be on, go to link I provided and turn them ON

 

Those are alchol virtual drives. how do I turn them on?

the writer is showing as ON in the device manager.

 

This one looks like your burner, I think it may be a Samsung. Go to link provided and ignore the others, just concentrate on this one.

 

Hi Gwendolin,
Sorry to jump in here, but i think i see what the main problem is going to be, and im going to have to bring in creaky on this one.

That thing messes with the whole burn process, and i think the fix is to un-install those nvtabus drivers and let windows put its own drivers back in.
No matter what else we fix, this thing will stop the burning dead in its tracks until fixed. If i am correct.

i think there should be your burner drive listed there, not a virtual device.
I used to remeber the thread where creaky fixed it for someone, but i cant find it. I will PM him.

 

@MaxBurn, thanks for that, I thought it was unusual also so I punched in the model No for the burner and came up with Samsung. On closer examination I noticed the other DMAs were strange. Cheers.

 

Hi Gwen
I PMd creaky. He will probably pop in here and post the fix when he wakes up, if he ever sleeps.
I saw all those DMAs OFF for everything, and that clued me in on it.

Usually at least one is on for something.

 

Sorry to be a complete n00b and thanks for all the help so far but how do I uninstall the nvidia drivers?

I'm new to all to all this and dont wanna uninstall something I shouldn't.

 

I'm using the dvd recorder as i@ve lost a few dvds to the errors.

 

Well, I removed the driver and windows installed the nvidia driver again.

Its still having problems burning dvds.

 

I've used nero infotool and its not showing the dma as being on.

 

I really dont believe this, I have finally removed the nvidia drivers and dma is showing as on in nerotool but I still get that error message, this is driving me insane.

 

heres my recent log file, I've noticed that my hard drives are showing with dma off in it even tho infotool says they are on, I'm guessing this is the problem, how do I fix it?

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US07 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <KK1195Y MOR165R >Version: 1.0 - HA 1 TA 1 - 7.0.5.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6L160M0 nvatabus Port 3 ID 2 DMA: Off
CdRomPeripheral : KK1195Y MOR165R 1.0 dtscsi Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
KK1195Y MOR165R K: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 492MB (503832kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.3.2006
UDF compilation
23:37:02 #1 Text 0 File Isodoc.cpp, Line 6414
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

23:37:02 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

23:37:02 #3 Text 0 File Reader.cpp, Line 124
Reader running

23:37:02 #4 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-H552U running

23:37:04 #5 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

23:37:05 #6 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2229023 (495:20.23, 4353MB)

23:37:05 #7 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

23:37:05 #8 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193

23:37:05 #9 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:37:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2229024 (2229024) = #2229024/495:20.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2229024 blocks [E: TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------

23:37:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4565041152, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2229024 | lead-out | 1 | 0x41 | 0x00

23:37:05 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23:37:05 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:37:05 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

23:37:05 #15 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

23:37:05 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

23:37:05 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

23:37:05 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:37:05 #19 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode

23:37:05 #20 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

23:37:05 #21 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

23:37:17 #22 Text 0 File Cdrdrv.cpp, Line 1210
23:37:17.390 - E: TSSTcorp CD/DVDW TS-H552U : Queue again later

23:37:24 #23 SPTI -1502 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 14 A0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x053d0000: Len x10000
0x05 01 02 00 A1 00 01 00 83 B3 B0 00 9F 13 00 00
0x00 00 00 00 04 00 00 00 01 00 00 05 00 00 00 00
0x00 00 21 00 FF FF FF FF FF FF FF FF A5 14 00 00

23:37:24 #24 CDR -1502 File Writer.cpp, Line 302
DMA-driver error, CRC error
E: TSSTcorp CD/DVDW TS-H552U

23:37:24 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:37:24 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

23:37:24 #27 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 5279

23:40:18 #28 Phase 39 File dlgbrnst.cpp, Line 1730
Burn process aborted

 

Sorry to keep posting here so much but I uninstalled the writers drivers and got the same error but this time all the dmas are on.

heres the log file:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US07 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US07 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6L160M0 atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 513MB (525836kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.3.2006
UDF compilation
00:28:22 #1 Text 0 File Isodoc.cpp, Line 6414
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

00:28:23 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

00:28:23 #3 Text 0 File Reader.cpp, Line 124
Reader running

00:28:23 #4 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-H552U running

00:28:24 #5 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

00:28:24 #6 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2212639 (491:41.64, 4321MB)

00:28:24 #7 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

00:28:24 #8 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193

00:28:24 #9 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:28:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2212640 (2212640) = #2212640/491:41.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2212640 blocks [E: TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------

00:28:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4531486720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2212640 | lead-out | 1 | 0x41 | 0x00

00:28:24 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

00:28:24 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

00:28:24 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

00:28:24 #15 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

00:28:24 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

00:28:24 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

00:28:24 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

00:28:25 #19 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode

00:28:25 #20 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

00:28:25 #21 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00:28:32 #22 Text 0 File Cdrdrv.cpp, Line 1210
00:28:32.984 - E: TSSTcorp CD/DVDW TS-H552U : Queue again later

00:28:44 #23 SPTI -1502 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 14 E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x05d40000: Len x10000
0x1D CA 8C 94 6B 5A 7E B9 A1 31 69 E9 4C ED B9 5B
0xD3 9F 2B E4 58 64 CF 1D 1C 70 EE E2 DA 92 D7 6A
0x33 B1 68 F6 5A B9 56 8F 26 09 40 AD 91 06 A0 E6

00:28:44 #24 CDR -1502 File Writer.cpp, Line 302
DMA-driver error, CRC error
E: TSSTcorp CD/DVDW TS-H552U

00:28:44 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

00:28:44 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

00:28:44 #27 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 5343

00:29:02 #28 Phase 39 File dlgbrnst.cpp, Line 1730
Burn process aborted


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Looks like your on the right track, however the media you are using are letting you down. Try using Verbatim, Taiyo Yuden or Sony that are made in Japan and burn at 4X.