this is the message i got when using dvd identifier. I really dont know what im doing [09:38:04] Initializing Drive Interface [Auto-Select ASPI/SPTI] [09:38:04] SPTI Drive Interface Successfully Initialized [09:38:04] 1 Supported Drive Found (Out Of 1 Available Drive) [09:38:04] Manufacturer Database [08-OCT-06@727$93] Loaded From File : (@727$93) Entries Found [09:38:04] Internet Version Check Postponed Since Last Check Happened Less Than 1 Hour Ago [09:38:30] DVD+R/+RW Medium Detected. Starting Identification... [09:38:30] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [09:38:30] ERROR : ADIP Read M1 Failed : Not ready - Logical unit not ready [02/04/08] [09:38:30] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [09:38:30] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [09:38:30] ERROR : ADIP Read M2 Failed : Not ready - Logical unit not ready [02/04/08] [09:38:30] INFO : ADIP Read Method 2 Requires A Written DVD+R/+RW Disc [09:38:30] Disc Identification Did Not Complete Successfully
DVD Identifier is used to read the manufacturer's name and ID codes of DVD's when a disk is inserted in the drive It also shows the capabilities of the burner - the type of disks it can burn etc. It's odd that it has problems. IMGBurn, (a CD/DVD burning program) in addition to burning disks, can ID the disk manufacturer and most of the other information that DVD Identifier shows. Insert a disk, run the program. Click 'Mode' > 'Read' to see the disk properties. Then click, 'Tools' > 'Drive' > 'Capabilities' to see your burners information. http://www.afterdawn.com/software/cdr_software/cdr_tools/imgburn.cfm
I have clone dvd 2 and any dvd. When i burn a movie the movie is always fine up until the end then it gets like broken up or it just stops and i am so frusterated. I feel like i have tried everything. I am using memorex blank media dvd+r or tdk dvd-r even when the quality bar said 100% this was still happening. any help you could give me would be great someone suggested that i download something that would tell me like who made the blank media but the error message i posted before is the message i kept getting. thanks for your help
Try using quality media such as TYs or Verbs and a custom size in Clonedvd such as 4400 which allows you to not burn to the edge of the disc
are you acutally getting a dvd and trying it on a stand alone player? just trying to work out if it bombs out on burning or playing after?
the burn goes fine but after when i try to play it all is well until the end of the movie then wham just a bunch of skipping and it looks like there is a bunch of pixels and then it just stops.
thats your discs... try a different brand burn at 4x make project smaller say 4300meg output. use imgburn to tell you/us the id code of your bad discs... if you use nero post a log file here
