Hi folks i have used dvd decrypter to copy lord of the rings pt 3 successfully and a few others.Now suddenly it won't do any dual layer..i keep getting an error in the log saying:cannot write medium-incompatible format.I'm stumped as to why this is happening suddenly..any help would be much appreciated thanks
hi i was going to say use dvd decrypter but you do! not sure could be media is it from the same batch pack or new brand and id codes? infact what is the brand and id codes? use dvd identifier to get this info...
Rotary the brand is verbatim and here's some stuff i hope is what you were asking for lol... ** INFO : Drive = TOSHIBA CD/DVDW SD-R5372 [FW TU53] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-RW ** INFO : Disc = [DVD+R-DL:MKM-001-000] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 6925 kBps ( 5.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 8467 kBps ( 6.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 7056 kBps ( 5.09x) - [CLV/Non-Pure CAV] Descriptor #3 = 6703 kBps ( 4.84x) - [CLV/Non-Pure CAV] Descriptor #4 = 5645 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #5 = 4234 kBps ( 3.06x) - [CLV/Non-Pure CAV] Descriptor #6 = 2822 kBps ( 2.04x) - [CLV/Non-Pure CAV] Descriptor #7 = 1411 kBps ( 1.00x) - [CLV/Non-Pure CAV] Descriptor #8 = 706 kBps ( 0.51x) - [CLV/Non-Pure CAV] thanks again
hi it looks ok media but not sure will have a think aswell as other may jump in here to to help out...
Can you post the Decrypter Log? About the only thing I can think of is that Decrypter has a problem of some sort. You may want to uninstall and re-install. The "Create MDS File" box should be checked, it is checked by default but you can take a look at it here: Tools -> Settings -> ISO Read Mode Tab
Don't know if this will help, but there is a newer firmware version for your drive TU55. http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=31
hi fasfrank..the mds is ticked.here is the decrypter error message: i/o error device1:0:0)toshiba dc/dvdw sd-r5372tu53(d(ata) Scsistatus:0x02 interpretation:check condition cdb:2a 00 00 00 01 40 00 00 20 00 interpretation:write(10)-sectors 320-351 sense area:70 00 03 00 00 00 00 0a 00 00 00 00 0c 00 00 00 00 00 interpretation: write error the decrypter log says..cannat write to medium-incompatible format failed to write sectors 320-351 write error thanks
hi i would first say bad media but i have seen this error then some one use nero app and it urnt it ok! so thats prob my advice to you try another app at this piont... i have also heard that ejecting the tray in DvdD has made a disc carry on burning!
