Hi guys I have a problem with a dual layer disk (i use nero)the following log occurs Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/7/2004 17:33:44 Nero version: 6.3.1.25 Recorder: <_NEC DVD_RW ND-2500A> Version: 1.07 - HA 2 TA 0 - 6.3.1.25 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MATSHITA UJDA730 DVD/CDRW>Version: 1.00 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJDA730 DVD/CDRW atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJDA730 DVD/CDR D: CDRom0 _NEC DVD_RW ND-2500A F: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 734MB (752624kB) Free physical memory: 400MB (410520kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.5.2005 Burn DVD Image 18:29:19 #1 Text 0 File Reader.cpp, Line 126 Reader running 18:29:19 #2 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD_RW ND-2500A running 18:29:19 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1365880832 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=614:12.36 ( 2763936) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Vasilis03\My Documents\Image.nrg> 18:29:19 #4 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 18:29:19 #5 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2763935 (614:12.35, 5398MB) 18:29:19 #6 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD DVD) 18:29:19 #7 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A, Media type: DVD+R9 Double Layer 18:29:19 #8 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:29:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2763936 (2763936) = #2763936/614:12.36 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2763936 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 18:29:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5660540928, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2763936 | lead-out | 1 | 0x00 | 0x41 18:29:19 #11 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 2.4x (3.324 KB/s) 18:29:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:29:20 #13 Text 0 File DVDPlusDualLayer.cpp, Line 397 Disc finalized, LBA total Image size: 2763936 (5398MB), Last LBA L0: 1381983 (2699MB) 18:29:20 #14 Text 0 File DVDPlusDualLayer.cpp, Line 481 L0 Data Zone Capacity set to 1381984 (151660h, 2699MB) -> OK, confirmed setting 18:29:20 #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 506 Burning Layer 1 18:29:20 #16 Text 0 File DVDPlusDualLayer.cpp, Line 514 Start writing layer 1 at address 0 (0h) 18:29:20 #17 SCSI -1066 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03587000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 18:29:20 #18 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 28:33,611 (1713611ms) -> OK 18:29:20 #19 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 18:29:25 #20 SCSI -1046 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08D80000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x11 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x11 18:29:25 #21 CDR -1046 File Writer.cpp, Line 304 Illegal disc 18:29:25 #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 18:29:26 #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 18:29:26 #24 SCSI -1046 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x11 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x11 18:29:26 #25 SCSI -1046 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x11 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x11 18:29:26 #26 Phase 127 File dlgbrnst.cpp, Line 1855 Generating DVD high compatibility borders 18:29:26 #27 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 18:29:26 #28 CDR -1046 File WriterStatus.cpp, Line 164 Illegal disc 18:29:26 #29 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 18:29:26 #30 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 18:29:26 #31 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 5/10/2001 12:54:28 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 18/4/2005 16:28:31 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/9/2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/9/2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/9/2004 11:58:10 (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/8/2004 23:59:44 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) is the problem at the disk or at my DVD-R (I have a NEC DVD_RW ND-2500A Version: 1.07 support DL disks) can anyone help me
hi ok 4 things to note! 1, update to latest nero! 2, i think i have seen problems with the NEC drive and not just dual layer discs either? i could be wrong? 3, uninstall INCD it conflicts with burning! 4, update firmware for your drive!
the NEC 2500A was not designed originally for dual layer dvd's... what you would need to do is flash that drive with the 2510's firmware. OH seems you already flashed with Herrie's firmware to get 1.07... um i guess just read this thread http://forum.rpc1.org/viewtopic.php?t=25904
I remember reading a while back that the success rate of flashing a single layer burner to dual layer was about 50%. I don't know if that rate has improved or not. It was not always successful and the ones that did work became very picky on media. This is just from reading not direct experience. Jerry
I have found a firmware .bin but it seems I can't find the flasher could anyone help me! Thank you in advance!
First, you need to get "nero's clean tool and Incd's clean tool," clean them both out of your computer. Reboot your computer, install nero again, then try to back up again. Secondly, if your dvd-burner is not a DL support then you're more likely to make more coasters in reality. However, if you have a dvd-burner that's capable of burning DL media, then make sure you set the settings in Nero into a "dvd9" - this will make you a happy camper.
Hi there, http://www.necus.com/support/ http://support.necsam.com/oem/downloads/flashfirmware/readme.asp?ID=3 The latest official firmware for the NEC-2500A seems to be is v1.0A Nero v6.6.0.13 is out, several bugs have been fixed, specialy if your dealing with Dual Layer, I would definitly upgrade.
