i made a dvd image and tryed burning it but it failed for some reason. The disc i used is now unuseable. It was too big to fit on a single layer disc so i used a duel layer one. my computer has a duel layer burner. Here is the log file. any help would be apprechiated.
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/10/2004 3:35:32 AM Nero Version: 6.6.0.8 (Nero Express) Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JD-00HBB0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3520A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 478MB (489964kB) Free physical memory: 185MB (190088kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.5.2006 Burn DVD Image 2:00:10 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 2:00:10 PM #2 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-3520A running 2:00:10 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 7869857792 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=853:56.04 ( 3842704) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\Patricks stuff\nirvana vids\nirvana dvd.nrg> 2:00:10 PM #4 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 2:00:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3842703 (853:56.03, 7505MB) 2:00:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 2:00:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+R9 Double Layer 2:00:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:00:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 3842704 (3842704) = #3842704/853:56.4 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3842704 blocks [_NEC DVD_RW ND-3520A] -------------------------------------------------------------- 2:00:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7869857792, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3842704 | lead-out | 1 | 0x41 | 0x00 2:00:11 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:00:11 PM #12 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 2:00:11 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:00:11 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 2:00:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 2:00:11 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 424 Disc finalized, LBA total Image size: 3842704 (7505MB), Last LBA L0: 1921359 (3752MB) 2:00:51 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 553 L0 Data Zone Capacity set to 1921360 (1D5150h, 3752MB) -> OK, confirmed setting 2:00:51 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 578 Burning Layer 1 2:00:51 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 586 Start writing layer 1 at address 0 (0h) 2:00:51 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04060600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 2:00:51 PM #21 Text 0 File DVDR.cpp, Line 6098 Book Type counter: 500, Book Type selected in EEPROM, command version 2 2:00:51 PM #22 Text 0 File DVDR.cpp, Line 6098 Book Type counter: 500, Book Type selected in EEPROM, command version 2 2:00:51 PM #23 Text 0 File DVDR.cpp, Line 6098 Book Type counter: 500, Book Type selected in EEPROM, command version 2 2:00:51 PM #24 Text 0 File DVDR.cpp, Line 5222 Drive: _NEC DVD_RW ND-3520A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 2:00:51 PM #25 CDR -1207 File DVDR.cpp, Line 4933 Book Type automatically set to: DVD-ROM 2:00:51 PM #26 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 2:20:09 PM #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1038 Burning Layer 2 2:20:09 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1045 Perform layer 1 to 2 jump before writing at address 1921360 (1D5150h) 2:28:32 PM #29 SCSI -1093 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03BF0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x29 0x78 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 2:28:32 PM #30 CDR -1093 File Writer.cpp, Line 311 No seek complete 2:28:32 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:28:33 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:28:33 PM #33 SCSI -1135 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 2:28:33 PM #34 SCSI -1176 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 2:28:33 PM #35 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 2:28:33 PM #36 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 2:28:33 PM #37 Text 0 File DVDR.cpp, Line 6098 Book Type counter: 500, Book Type selected in RAM, command version 2 2:28:33 PM #38 Text 0 File DVDR.cpp, Line 6098 Book Type counter: 500, Book Type selected in RAM, command version 2 2:28:33 PM #39 Text 0 File DVDR.cpp, Line 5222 Drive: _NEC DVD_RW ND-3520A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 2:28:33 PM #40 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 10:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Firstly, edit out your serial number. I would update to this version http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Your firmware is way behind, go to this link and select the one for your burner. http://forum.rpc1.org/dl_firmware.php?download_id=2005 I will check this one out and get back to you. Heres what I found [bold]Solution: 90% of the time this type of error message is caused by poor media, poor power to the recorder, or an optical head needing cleaning, or a drive needing to be serviced. But it's only 90% of the time. On a rare occasion I've seen this caused by driver conflicts. Either from other software, or drivers for the IDE Controller. Old firmware on the recorder - Go to the recorder MFG's website to obtain the latest firmware for your recorder. (You may be able to obtain it from this link as well: http://forum.rpc1.org/dl_all.php) Poor media - Try more than one brand of media. For example: TDK, Verbatim, Imation, Yamaha, HP, etc. Poor IDE cable or incorrect cable - For higher end recorders these days if you use the 40pin cable you can have all sorts of unusual symptoms. It would be best to use an ATA-133 80 wire cable. Driver conflicts - If you have or had another CD recording software installed on your system, its drivers could be conflicting with our software. This is rare for this symptom, but it does occur. Uninstall any other recording software and make sure all its drivers have been removed with it. Then reinstall Nero and make sure to use the latest version we have posted on our website. Defective recorder - The optical head on your recorder may need cleaning or servicing. Or it's possible the circuit board on your recorder has an open coil or blown diode or resistor. Any of these could cause the error. Only solution would be to send the drive in for service to the recorder manufacturer.[/bold]
