Hi, I am facing DVD burining issues with Nero 8. CD Burning works perfectly fine but the DVD burning doesn't. Following is the log of the error, please let me know if you can figure out the problem. Thanks
you have a Power calibration error Options you can try with "power calibration errors" o Try another brand of DVD-/+R or DVD-/+RW media. This is the most common cause of OPC errors. o "Slow down your burning speed". o Update the firmware of your recorder. Check the manufacturer's website for the latest version. o Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the errors occurs with an external recorder, Check the USB cable and connections. o Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. o Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser. o Replace the DVD burner. lets hope we don't need to do the last one nero 8 has some problems most have better luck with nero 7
Thanks for the reply and tips, I will have a check with the cables and see what happens.. Hoping for the best.. Thanks
