first of all let me say that I have a dell dim.8400, and I'm using emc 7. For some strange reason, when i make a slideshow with dvd builder and try to burn it directly to a dvd+r disk, i always get an error messege. But if I burn it with a dvd+rw, it burns it with no problem. I even tried burn an iso file first, and tried burning it to a dvd then, and get a buffer under run. I'v download the lastest patch from roxio, and I didn't see any firmwear for my burner from dell, so i have no idea what the problem is. I also have other software where i make slideshows, and also keep getting error messeges, but only with dvd+r, but fine with dvd+rw. I'm using the same dvd's that have been working for me in the past, so right now i'm just lost!! And ofcourse I don't want to have to keep using dvd+rw's. So can someone please give me some ideas on what to try, Thank You juanb ps my burner is a philips DVD8601
My guess is that you have a Samsung burner. Go to the Roxio forums and do a search for your Samsung burner. You will find the solution for updating the firmware. If it is the Samsung 252S, look at this thread: http://boards.support.roxio.com/roxio/board/message?board.id=0715&message.id=17314#M17314 If it is a Philips, do a search of Afterdawn forums.
Sorry about that mrjuan. You are correct. Senior moment. Do a search, here, in the forums. I know I have seen that model mentioned. Here is the link to your burner. http://forums.afterdawn.com/thread_view.cfm/110557
