m using Nero 6.6.0.8 i m try to burn my backup files to a data dvd but it wont run,stop at 1%. appear the log error msg below. somebody help me pls! (i can burn it b4,but it cant work suddenly,and i can burn cd-r and read dvd..)) this is the situation after i reinstall the pri&sec IDE channel.. and the newest log error msg. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-7-17 10:03:20 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 5:35:34 PM Nero Version: 6.6.0.8 Recorder: Version: A103 - HA 0 TA 1 - 6.6.0.8 Adapter driver: HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: 2.7a - HA 3 TA 0 - 6.6.0.8 Adapter driver: HA 3 === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6L080P0 BAH4 viamraid Port 2 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163 H: CDRom0 SCSIVAX DVD/CD-ROM G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 64MB (66388kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.4.2006 ISO compilation 7:05:45 PM #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:05:45 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 7:05:45 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 7:05:45 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:05:45 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 7:05:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2248255 (499:36.55, 4391MB) 7:05:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 7:05:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 7:05:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:05:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2248256 (2248256) = #2248256/499:36.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2248256 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 7:05:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4604428288, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2248256 | lead-out | 1 | 0x41 | 0x00 7:05:46 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:05:47 PM #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 7:05:47 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:05:47 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 7:05:47 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:05:47 PM #17 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 7:05:47 PM #18 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 7:05:47 PM #19 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 7:05:47 PM #20 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:05:47 PM #21 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Book Type setting not supported for the loaded disc type 7:06:15 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0A560000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x00 0x0C 0x0C 0x00 7:06:15 PM #23 CDR -1135 File Writer.cpp, Line 311 Write error 7:06:16 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:06:16 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:06:17 PM #26 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was -1 7:06:17 PM #27 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD+R Book Type setting not supported for the loaded disc type 7:06:17 PM #28 CDR -1135 File WriterStatus.cpp, Line 167 Write error 7:06:17 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 7:06:17 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2002-7-17 9:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 2005-11-18 12:19:28 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-8-3 10:59:44 PM (Adapter driver for rec) File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-4-30 9:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) somebody help pls..
[bold]Nero Version: 6.6.0.8[/bold] ur version of nero is way behind update it. [bold]Physical memory : 503MB (515372kB) Free physical memory: 64MB (66388kB) Memory in use : 87 % [/bold] free up some memory, donot multi task whil burning.. [bold]Sense Key: 0x03 (KEY_MEDIUM_ERROR) Disc Manufacturer: CMC MA - G. AE1 [/bold] this media is not a good choice. get some Verbatim or Ty. [bold]Burn process failed at 8x (11,080 KB/s) [/bold] and try to burn at a slower speed. like 4x.
still cannot work.. i close all my task and burn as 4x.. actually i try use nero 7 but still the same situation.. rly dunno wat is the problem..
dis is the newest log msg Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-7-17 10:03:20 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 5:35:34 PM Nero Version: 6.6.0.8 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 0 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 3 TA 0 - 6.6.0.8 Adapter driver: <Vax347s> HA 3 === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6L080P0 BAH4 viamraid Port 2 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163 H: CDRom3 SCSIVAX DVD/CD-ROM G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 52MB (53916kB) Memory in use : 89 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.4.2006 ISO compilation 2:55:55 PM #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:55:55 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 2:55:55 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 2:55:55 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 2:55:55 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 2:55:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 607 ( 0:08.07, 1MB) 2:55:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 2:55:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 2:55:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:55:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 608 (608) = #608/0:8.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 2:55:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 608 | lead-out | 1 | 0x41 | 0x00 2:55:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:55:58 PM #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 2:55:58 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:55:58 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 2:55:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:55:58 PM #17 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 2:55:58 PM #18 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 2:55:58 PM #19 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 2:55:58 PM #20 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:55:58 PM #21 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Book Type setting not supported for the loaded disc type 2:56:23 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x062D0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x00 0x0C 0x0C 0x00 2:56:23 PM #23 CDR -1135 File Writer.cpp, Line 311 Write error 2:56:23 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:56:24 PM #25 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was -1 2:56:24 PM #26 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD+R Book Type setting not supported for the loaded disc type 2:56:24 PM #27 CDR -1135 File WriterStatus.cpp, Line 167 Write error 2:56:24 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 2:56:24 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2002-7-17 9:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 2005-11-18 12:19:28 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-8-3 10:59:44 PM (Adapter driver for rec) File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-4-30 9:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
guys..i know my problem already.. thank you all for trying to help but my dvd-write is down i think..
Don't give up so easy. First follow our suggestions. If it is your drive, we will let you know. The error log you posted contained lots of things that were wrong. Things need to be taken one step at a time.
