Hi guys, I'm trying to burn an .iso to a DVD-R using DVD Decrypter and I get the following message (taken from my DVD Decrypter log) I read something about a firmware issue on another log but I burned a DVD using another brand of DVD's (DYNEX) a week ago. Not sure if it's the media I'm using or my DVD burner. Please help. Thanks! I 19:22:03 DVD Decrypter Version 3.5.4.0 started! I 19:22:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 19:22:04 Initialising SPTI... I 19:22:04 Searching for SCSI / ATAPI devices... I 19:22:04 Found 1 DVD±RW! I 19:22:14 Operation Started! I 19:22:14 Source File: C:\Documents and Settings\Brittani Pena\Desktop\movies\300.ISO I 19:22:14 Source File Sectors: 2,285,852 (MODE1/2048) I 19:22:14 Source File Size: 4,681,424,896 bytes I 19:22:14 Source File Implementation Identifier: DVD Shrink I 19:22:14 Destination Device: [1:0:0] _NEC DVD_RW ND-2500A 1.06 (E (ATA) I 19:22:14 Destination Media Type: DVD-R (Disc ID: SONY16D1) I 19:22:14 Destination Media Sectors: 2,297,888 I 19:22:14 Write Mode: DVD I 19:22:14 Write Type: SAO I 19:22:14 Write Speed: MAX I 19:22:14 Link Size: Auto I 19:22:14 Test Mode: No I 19:22:14 BURN-Proof: Enabled E 19:22:27 Failed to Reserve Track! - Cannot Write Medium - Incompatible Format E 19:22:30 Operation Failed! - Duration: 00:00:16 I 19:22:30 Average Write Rate: N/A - Maximum Write Rate: N/A
Hi cocobrit Yep you can use a firmware update - the latest is 1.0B Take the burn speed down from max to 8x. The discs in this log are made by Sony - usually good. Dynex on the other hand can be hit or miss - they don't always use the best manufacturers.
