enzo123, I'm seeing a Power Calibration Error. Check to see if you your burner is set to DMA. If not, assuming you're running XP, right click on My Computer=>Properties=>Click Device Manager=>Expand IDE ATA/ATAPI controllers=> On Primary and Secondary IDE channel, perform the following: Right click on the Primary IDE controller=>Properties=>Advanced Settings tab. Check that the Transfer Mode for both devices is set to DMA if available. Repeat this for Secondary IDE controller. Also, please note that in some cases older drives will not support DMA mode. In that case set both devices to PIO mode.
ok thanks bro i looked through my settings and only one, a secondary one, had PIO so i changed it and i will try burn tonight thanks
This is probably the longest log I have ever seen First up you have ALL your serial numbers displayed Edit them out before someone pirates them This is an older version of Nero, try for an update here 6.6.1.15 http://www.filehippo.com/download/7717bb2aa35a8a6b405b8322e5dfe50b/download/ Your log does not indicate the brand of disc you are using, avoid memorex or anything made by CMC Mag
thanks for the serial thing i changed it =] and i had downloaded a new thing of nero but when i used it it had problems i cant remember what they were but it bugged me alot and the CD's are TDK DVD +R's thanks again for the serial thing
Ok so, after my burn tonight it still didnt work again it came up with a disk error i thought it was the same one as last time so i didnt save it but after a second look it actually burned something to the disk this time it see's it as a movie DVD and has its name but i cant play it any ideas???
