Hey everyone. I have been pulling my hair out with a DVD+R that I am trying to burn. It is about 5.3gb. Therefore, I know it won't fit on a single layer disc. A friend told me about the double layer discs and I thought I would give it a try. However, now, all I keep getting is failure! I saw on one of the forums here about the 2 upgrade packages that could be necessary. Before I downloaded those, I was getting a "session error" that said it could not complete the end the disc-at-once burn (I think that is how it was worded). Anyway, after the downloads, I am just getting burn failure. The log is as follows: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <BENQ DVD DD DW1620> Version: B7C9 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B105 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75FJA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-ROM SC-148C D: CDRom0 SAMSUNG CD-R/RW SW-248F E: CDRom1 BENQ DVD DD DW1620 F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523264kB) Free physical memory: 182MB (186696kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.7.2006 UDF/ISO compilation 12:52:36 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 12:52:36 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 12:52:36 AM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:52:36 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 12:52:36 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:52:36 AM #6 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1620 running 12:52:36 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:52:36 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:52:36 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:52:37 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2808319 (624:04.19, 5484MB) 12:52:37 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:52:37 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: BENQ DVD DD DW1620, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 12:52:37 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:52:37 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2808320 (2808320) = #2808320/624:4.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2808320 blocks [BENQ DVD DD DW1620] -------------------------------------------------------------- 12:52:37 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5751439360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2808320 | lead-out | 1 | 0x41 | 0x00 12:52:37 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:52:37 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:52:37 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:52:37 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 12:52:37 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:52:37 AM #21 Text 0 File DVDPlusDualLayer.cpp, Line 628 L0 Data Zone Capacity set to 1404304 (156D90h, 2742MB) -> OK, confirmed setting 12:52:37 AM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 655 Burning Layer 1 12:52:37 AM #23 Text 0 File DVDPlusDualLayer.cpp, Line 665 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 12:52:37 AM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 186D90 h (LBN: 156D90 h, 2742 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: D01 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@ 25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 12:52:37 AM #25 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: Current recorder setting 12:52:37 AM #26 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 12:52:40 AM #27 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BA80000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:52:41 AM #28 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C2E1600 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:52:41 AM #29 Text 0 File Mmc.cpp, Line 19440 Writer-Buffer for BENQ DVD DD DW1620\H2 T0 reduced to 32768Bytes 12:52:41 AM #30 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C2E1600 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:52:41 AM #31 CDR -500 File Writer.cpp, Line 311 SCSI command aborted BENQ DVD DD DW1620\H2 T0 12:52:41 AM #32 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:52:42 AM #33 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:52:42 AM #34 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 12:52:42 AM #35 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:52:42 AM #36 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:52:42 AM #37 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 12:32:46 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any help would be SOOOOOOOOOOOOOOO appreciated!!!! Thanks!!
Latest firmware is B7W9, available from here http://support.benq.com/files/storage/Firmware/DVDRW/DW1620/B7W9.zip You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Thanks so much for getting back with me! I performed both downloads and I'm still getting "burn failure" with the following log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B105 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75FJA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-ROM SC-148C D: CDRom0 SAMSUNG CD-R/RW SW-248F E: CDRom1 BENQ DVD DD DW1620 F: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523264kB) Free physical memory: 179MB (183840kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.7.2006 UDF/ISO compilation 1:44:32 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 1:44:33 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 1:44:33 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:44:33 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 1:44:33 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 1:44:33 PM #6 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1620 running 1:44:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 1:44:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 1:44:33 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 1:44:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2808319 (624:04.19, 5484MB) 1:44:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 1:44:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: BENQ DVD DD DW1620, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 1:44:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:44:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2808320 (2808320) = #2808320/624:4.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2808320 blocks [BENQ DVD DD DW1620] -------------------------------------------------------------- 1:44:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5751439360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2808320 | lead-out | 1 | 0x41 | 0x00 1:44:34 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 1:44:34 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 1:44:34 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 1:44:34 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 1:44:34 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:44:35 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 628 L0 Data Zone Capacity set to 1404304 (156D90h, 2742MB) -> OK, confirmed setting 1:44:35 PM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 655 Burning Layer 1 1:44:35 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 665 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 1:44:35 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 186D90 h (LBN: 156D90 h, 2742 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: D01 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@ 25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 1:44:35 PM #25 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: Current recorder setting 1:44:35 PM #26 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 1:44:39 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BAD0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:44:42 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C231600 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:44:42 PM #29 Text 0 File Mmc.cpp, Line 19440 Writer-Buffer for BENQ DVD DD DW1620\H2 T0 reduced to 32768Bytes 1:44:45 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C231600 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:44:45 PM #31 CDR -500 File Writer.cpp, Line 311 SCSI command aborted BENQ DVD DD DW1620\H2 T0 1:44:45 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:44:45 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:44:46 PM #34 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 1:44:46 PM #35 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 1:44:46 PM #36 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 1:44:46 PM #37 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) So...anything else I can try? This is not usually something that I have this much trouble with...nonetheless, I can't get it to work and was really wanting to get these discs burnt before the weekend. ARGH!! Again, thanks so much...but is there anything else I can try?
