dvd-r media

recently i just bought a 25 pack of tdk dvd-r and out of 17 only 3 were able to complete sucessfully.before this i just went through a 50 pack of cheap cds and all of them worked no problem. right now i am using dvd shrink to rip and then nero to burn and it was working fine until this.when i first got my burner i had to reboot windows and do that forcaspi but now i can only rip . after im done ripping it automatically starts the burning procces then after 3-5 mins. it says burn process failed. i also recieved one that said power calibration error..please help im a noob..




Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=49152 bytes, created 3/14/05 2:39:52 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: < 16X8 DVD DUAL> Version: A05a - HA 0 TA 0 - 6.3.1.17
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
16X8 DVD DUAL (Target 0, E: Autoinsert On, DMA On, Disconnect Off, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260128kB)
Free physical memory: 57MB (58384kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.8.2005
NeroAPI
6:03:42 PM #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

6:03:46 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

6:03:46 PM #3 Text 0 File Writer.cpp, Line 124
Writer 16X8 DVD DUAL running

6:03:46 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6:03:47 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:03:49 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:03:50 PM #7 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

6:03:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)

6:03:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

6:03:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: 16X8 DVD DUAL, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

6:03:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:03:57 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [ 16X8 DVD DUAL ]
--------------------------------------------------------------

6:03:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ 16X8 DVD DUAL ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2202144 | lead-out | 1 | 0x00 | 0x41

6:03:58 PM #14 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

6:03:59 PM #15 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

6:03:59 PM #16 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

6:03:59 PM #17 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)

6:03:59 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:04:00 PM #19 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode

6:04:00 PM #20 Text 0 File Mmc.cpp, Line 20405
Set BUFE: supported -> ON , Generic write control : ON

6:04:00 PM #21 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes

6:04:00 PM #22 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:06:20 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x030D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

6:06:20 PM #24 CDR -1106 File Writer.cpp, Line 304
Power calibration error

6:06:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:06:21 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:06:21 PM #27 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1

6:06:21 PM #28 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)

6:06:21 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

6:06:21 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 5/13/05 8:17:54 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 5/13/05 8:17:54 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 5/13/05 8:17:54 PM
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ElbyCDIO.vxd': Ver=4, 3, 2, 5, size=33031 bytes, created 9/19/03 7:08:32 AM

Registry Keys:

 

thanks all i did was set the target size smaller and burn at 4x and its working fine..should i still update nero and just wondering how long should it take to rip a movie

 

thank you lots creaky