hi there folks.hope somebody can give me some help and advice.i'm trying to back up my dvd collection but having mixed results,sometimes it'll work and sometimes not. i.ve tried various programmes to back up and i'm now wondering if its poor media i'm using.(ritek with a white label dvd-r). i'm considering trying dvd+r,will i be able to playback my backed-up movies on my playstation2 like i can with dvd-r????. any help would be really appreciated.
@rog2 Your Ritek should be okay - they're decent media. I have an older ps2 that plays both formats but from what I understand ps2's can be picky w/ media. The up side to using +r -is your can booktype to a dvd-rom which makes it even more compatible. Your burner justs needs to support this. Make sure you are not burning at max speed - try 4x and that your burners firmware it up to date. Post back with the make and model of your burner and current firmware. What progs are you using? Oh and what problems are you having -palyback issues?
thanx for the reply,i'm using the nero reloaded package with a freecom dvd+/-rw 16h9 usb external burner. the last time i attempted a burn it read the disc ok but as it attempted to write the following log appeared.any ideas??. ********** Nero Recode 2 ********** Version: 2.1.1.24 A C 1A23-xxxxxxxxxxxxxxxxxxxxxxxxxxxxx Project type: Copy entire DVD Target size: DVD5 (2282925) Burn settings: Target: FREECOM_ DVD+/-RW16H9 Number of copies: 1 Write speed: 2770 KB/s Temp folder: C:\Documents and Settings\Administrator\My Documents\Nero Recode (14569603072 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 13:50:34 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VMG Menus Vobs [1156 vobus] 110.33MB -> 110.33MB [R 1.00] Video: 0.63MB, extra: 109.70MB Audio: 1 streams 0. 0. LPCM 2-ch Unspecified 107.42MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 0.02MB [enabled] VTS_01 Title Vobs [10402 vobus] 2569.54MB -> 2569.54MB [R 1.00] Video: 2429.20MB, extra: 140.34MB Audio: 2 streams 0. 0. Dolby Digital 2-ch Unspecified 120.03MB [enabled] 1. 1. MPEG-1 2-ch Unspecified 0.00MB [disabled] Subpicture: 0 streams 13:50:34 File burn_dvdfiles.cpp, Line 1153 Compile DVD: begin copy 1 13:50:35 File NeroRecorderBase.cpp, Line 448 Writing to disc: DVD-R 13:50:35 File NeroRecorderBase.cpp, Line 462 Free capacity on disc: 2286468 sectors (2298496) 13:50:35 File burn_dvdfiles.cpp, Line 480 Compile DVD: burning 2286468 sectors (1372197 required) 13:50:35 File burn_dvdfiles.cpp, Line 657 Compile DVD: adjust target size to 4465.76MB (2680.07MB obtained) 13:50:35 File burn_dvdfiles.cpp, Line 525 Compiling DVD Volume started 13:51:12 File burn_dvdfiles.cpp, Line 1059 Compile DVD: finished VMG Menus Vobs VMG Menus Vobs: Original 110.33MB -> Expected 110.33MB -> Output 110.33MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 1156 Slide encoded = 0 StillImage encoded = 0 Output extra size = 109.70MB Source video size = 0.63MB Pictures Modified [I 0] [P 0] [B 0] 13:55:00 File NeroRecorder.cpp, Line 589 Added extra file VTS_01_2.VOB 13:59:54 File NeroRecorder.cpp, Line 589 Added extra file VTS_01_3.VOB 14:01:57 File burn_dvdfiles.cpp, Line 1059 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 2569.54MB -> Expected 2569.54MB -> Output 2569.54MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 10402 Slide encoded = 0 StillImage encoded = 0 Output extra size = 140.34MB Source video size = 2429.20MB Pictures Modified [I 0] [P 0] [B 0] 14:01:59 File burn_dvdfiles.cpp, Line 548 Compile DVD: completed successfuly (2680.07MB) 14:01:59 File NeroRecorderBase.cpp, Line 1015 Burning 8 files with total size of 2810259456 bytes on hard disk 14:01:59 File burn_dvdfiles.cpp, Line 1153 Compile DVD: begin copy 1 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 04/09/2005 14:01:23 ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12 Nero API version: 6.6.0.1 Using interface version: 6.3.1.11 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <FREECOM_ DVD+/-RW16H9> Version: FR01 - HA 4 TA 0 - 6.6.0.1 Adapter driver: <> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : ST94019A atapi Port 0 ID 0 DMA: On CdRomPeripheral : COMPAQ DVD-ROM DRN8080B atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off === CDRom-Device-Map === COMPAQ DVD-ROM DRN8080B D: CDRom0 AXV CD/DVD-ROM E: CDRom1 NERO IMAGEDRIVE2 G: CDRom2 FREECOM_ DVD+/-RW16H9 H: CDRom3 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261488kB) Free physical memory: 59MB (61236kB) Memory in use : 76 Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.9.2005 NeroAPI 14:01:59 #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 14:01:59 #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 14:01:59 #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 14:02:00 #4 Text 0 File Reader.cpp, Line 127 Reader running 14:02:00 #5 Text 0 File Writer.cpp, Line 122 Writer FREECOM_ DVD+/-RW16H9 running 14:02:00 #6 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 14:02:00 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 14:02:00 #8 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 14:02:00 #9 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1372735 (305:03.10, 2681MB) 14:02:00 #10 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 14:02:00 #11 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: FREECOM_ DVD+/-RW16H9, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 14:02:00 #12 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 14:02:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1372736 (1372736) = #1372736/305:3.11 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1372736 blocks [FREECOM_ DVD+/-RW16H9] -------------------------------------------------------------- 14:02:00 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [FREECOM_ DVD+/-RW16H9] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2811363328, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1372736 | lead-out | 1 | 0x00 | 0x41 14:02:00 #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 14:02:00 #16 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 14:02:00 #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 14:02:00 #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2x (2,770 KB/s) 14:02:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 14:02:01 #20 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 14:02:02 #21 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 14:02:02 #22 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 14:02:02 #23 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 14:02:10 #24 Text 0 File Cdrdrv.cpp, Line 1284 14:02:10.912 - FREECOM_ DVD+/-RW16H9\H4 T0 : Queue again later 14:02:11 #25 SCSI -500 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x03FF0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 14:02:11 #26 CDR -500 File Writer.cpp, Line 311 SCSI command aborted FREECOM_ DVD+/-RW16H9\H4 T0 14:02:11 #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 14:02:11 #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 14:02:11 #29 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was 607 14:02:31 #30 CDR -1114 File WriterStatus.cpp, Line 167 Reset occurred FREECOM_ DVD+/-RW16H9\H4 T0 14:02:31 #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 14:02:31 #32 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 04/09/2005 14:01:23 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 12/06/2003 09:00:00 File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/09/2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/09/2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/09/2004 11:58:10 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 14:02:34 File NeroRecorderBase.cpp, Line 825 Burn failed (3) 14:02:34 File burn_dvdfiles.cpp, Line 300 Compile DVD: exit
rog2 Your serial number needs to be editted out in the middle of the log - it's there 2x. Okay let's see if we can sort this out. upgrade to the latest 6.6.0.16 Wow - that's not alot. Shut down some processed - no multi tasking A nero update and firmware update should take care of this. As for the firmware I couldn't find your model so I don't know if it's up to date. I looked in us & uk at: http://www.freecom.com & http://forum.rpc1.org/dl_all.php You may want to peek also.
@rog2, You still need to sort through the entire log and edit out your Nero Serial # before someone steal it and use it for free. It is still in there somewhere in the middle of your log. I noticed you just edited the first part only, but there are still 2 parts in the middle that has your Nero Serial. Other than what binkie7 had suggested, all I can say is you need to get rid/uninstall all of InCD and its products from your computer. InCD and Nero don't get along, it has been confirmed in the past. A lot of Nero users whom got InCD on their computer always conflicted with nero, thus it's producing"coasters". Go here http://ww2.nero.com/enu/Clean_Tools.html you need to download both Nero's General CleanTool and InCD General CleanTool to completely wipe out both your current Nero and InCD. Once your done with downloading them, just run them each at a time. Restart your computer, now download the latest from "Nero Ultra (6.6.0.16)" package #1 & #2 only. Now get yourself another high quality media such as Taiyo Yuden "Made In Japan" (including the 8X DVD+R Fuji & Sony "Made In Japan), Verbatim or Maxell (Made In Japan only) and try to do another back up. Hopefully this time you'll have a successful backup. Again other than what binkie7 had mentioned, I didn't see your Freecom dvd burner at rpc firmware forum at all. The closest that's similar to yours is a Freecom DVD+R/-RW 16B9 only. Go here http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=109 and check it out for yourself, if it's not yours then don't update the firmware because you don't want it to mess up yours. However, if you're able to find a current firmware for yours, then you need to update it.
hi alkohol/binkie,thanx for your help and suggestions. i took out all incd stuff but still no joy. can't seem to get thru to the nero website to get the cleantool either. can you explain how to edit my serial out of my posts too before anyone steals it. any idea why freecoms site is rubbish???,and why i cant get info on my burner. gettin really frustrated guys!!. help!!! ;0)
Hey rog2 To edit the post in the line that has the date & time to the right you'll see a piece of paper and pencil. Click that on - it will bring it up - just remove/change whatever you need to. I just clicked on the link alkohol gave and it came right up. What's happening? As for your burner - call their tech support & find out the deal. Your model # is nowhere to be found on their site. Let us know how it turns out!
@rog2, Have you done what binkie7 and I suggested? You can't just uninstall InCD via Add/Remove because sometimes it still leaves a bit or 2 pieces behind, you need to get "InCD General Clean Tool" from here http://ww2.nero.com/enu/InCD_CleanTool.html and then run the clean tool to completely wipe out InCD from your system. You'll also need to get "Nero's General Clean Tool" to wipe out Nero as well. Go here http://ww2.nero.com/enu/General_CleanTool.html and download it, then run it to rid of all Nero's products. Now reboot your computer and download the latest from Nero 6.6.0.16 #1 & #2 only. Once you're done with reinstall Nero 6.6.0.16, then try to do your backup again with another high quality media. You really need to re-edit your log, your Nero Serial # is still in there (somewhere close to the middle section, but near the top). To edit your post, click on the "little pencil & paper icon" on the right hand corner just a little above your post. I wouldn't be surprise if someone had already taken your serial by now.
hi guys,once again thanx for your help,sorry i've been a bit slow on things. i've just ran both the cleaning tools and am about to re-install nero. i'll keep you guys informed on my progress (or lack of it!!) /;0
rog2, In your original log you also had INCD install. Do not install it as it will give you problems w/ Burning DVD's
hi car.mike,i've done everything now but i'm still getting burn failures. i'm going to post the log for the most recent failure to see if you or any of the other guys can look it over to see what else i can do. thanx. A C Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 04/09/2005 14:01:23 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12 Nero version: 6.6.0.1 Recorder: <FREECOM_ DVD+/-RW16H9> Version: FR01 - HA 3 TA 1 - 6.6.0.1 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <FREECOM_ DVD+/-RW16H9 >Version: FR01 - HA 3 TA 1 - 6.6.0.1 Adapter driver: <> HA 3 === Scsi-Device-Map === DiskPeripheral : ST94019A atapi Port 0 ID 0 DMA: On CdRomPeripheral : COMPAQ DVD-ROM DRN8080B atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off === CDRom-Device-Map === COMPAQ DVD-ROM DRN8080B D: CDRom0 NERO IMAGEDRIVE2 G: CDRom1 FREECOM_ DVD+/-RW16H9 H: CDRom3 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261488kB) Free physical memory: 98MB (100620kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.9.2005 Burn DVD Image 17:35:34 #1 Text 0 File Reader.cpp, Line 127 Reader running 17:35:34 #2 Text 0 File Writer.cpp, Line 122 Writer FREECOM_ DVD+/-RW16H9 running 17:35:34 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -1452298240 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=308:24.72 ( 1387872) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Administrator\My Documents\LSC1.nrg> 17:35:34 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 17:35:35 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1387871 (308:24.71, 2710MB) 17:35:35 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 17:35:35 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: FREECOM_ DVD+/-RW16H9, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 17:35:35 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:35:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 1387872 (1387872) = #1387872/308:24.72 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1387872 blocks [FREECOM_ DVD+/-RW16H9] -------------------------------------------------------------- 17:35:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [FREECOM_ DVD+/-RW16H9] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2842361856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1387872 | lead-out | 1 | 0x00 | 0x41 17:35:35 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 17:35:35 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 17:35:35 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 17:35:35 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2x (2,770 KB/s) 17:35:35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:35:35 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 17:26,998 (1046998ms) -> OK 17:35:35 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 17:35:35 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 17:35:35 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 17:35:35 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:35:43 #21 Text 0 File Cdrdrv.cpp, Line 1284 17:35:43.411 - FREECOM_ DVD+/-RW16H9\H3 T1 : Queue again later 17:35:43 #22 SCSI -500 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x036B0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 17:35:43 #23 CDR -500 File Writer.cpp, Line 311 SCSI command aborted FREECOM_ DVD+/-RW16H9\H3 T1 17:35:43 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 17:35:44 #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 17:35:44 #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was 607 17:36:03 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 17:36:03 #28 CDR -1114 File WriterStatus.cpp, Line 167 Reset occurred FREECOM_ DVD+/-RW16H9\H3 T1 17:36:03 #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 17:36:03 #30 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 17:36:04 #31 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 04/09/2005 14:01:23 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 12/06/2003 09:00:00 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@rog2, I guess finally you edited the serial out. Just remember to delete (edit) out your Nero serial in prior to posting in here alright. Let's take a look at your new log now. this is an old version, update it to the latest Nero 6.6.0.16 I don't know if you have the latest firmware on your FREECOM dvd writer, but I tried to look for it and couldn't find anything on that model. You really need to google around the net to see if there's any new firmware for you bunrer, then update it. Updating your firmware can be very useful (helpful), it will be more compatible with other blank media and codes. This probably be ok for burning, but if you can, then try to free up more memory. The more you have the better the burning and performances you'll gain. Again, I think may be your dvd writer doesn't recognize this kind of media and or it doesn't like it. A firmware update should solve this. Try to burn at least 4X on your next backup. It is recommend that 4X is the best for all burnings. On the other hand, it won't hurt to try other high quality media such as Taiyo Yuden (Fuji & Sony DVD+R "made in japan) and Verbatim in the DVD+Rs format.
hi everyone,tried everything possible but still no joy,so i tried car.mike's suggestion of trying sony dvd+r disks and lo and behold it works fine!!!!!. i'm not sure what the problem has been as i burned about 20 dvd-r before without problem. i dont really care now that i'm back to successful burning. can't thank you guys enough for the help over the last few days,its really appreciated.
@rog2 Your welcome! It's what aD is here for! I'd still call Freecom's tech support and gets this sorted out. Their always coming out w/ new media and you'll need to stay on top of it by updating your firmware.
