DVD Shrink/Nero burning failure

Katrinaa,
Using the conversion rate that is about right as It is expensive. If you keep looking then look for one that does Dual Layer burns. You mght also look at the Lite-ons as some members here have good reports on them. Have a good time looking and if you have any problems after you get the burner just start a new thread and list the problems

 

I recently bought this same LG GSA-4163B DVD Writer. I'm using
the Nero Express burner software OEM that came with this writer,
so I'm pretty sure this Nero should work fine with this DVD Writer.

I was able to burn several data DVDs before, and recently it
started to fail writing also eventhough I used the same blank
DVD brand. I'm getting this Lead-In failure message and it conks
out in the middle of the burn. I've wasted 5 blank DVDs so far
and I don't know what on earth happened to this writer. It's
working just fine before, and suddenly I start getting this write
failures.

Reading the posts in this thread having the same issue, could this
LG DVD Writer model be a lemon that's why they're selling this
writer this cheap?

 

Pekchuwi,
It could be a lemon or it does not like the blank media you are using. Try Verbatim or Taiyo Yuden blank media. You should always be particular about the blank media you use as a lot of the media out there is crap

 

First of all thank you to Mike and Creaky for there help with my problems a few weeks ago.

Pekchuwi: I had the same problem. Had the burner for 6 months, working perfectly, then all of a sudden nothing would burn. Took it back to the store I bought it and exchanged it for a new one. Unfortunately I had to get the same burner, so hopefully this one will last longer! I wonder if these burners have a defect that causes them to crap out after a short time?? My media has always been Sony DVDs which I thought were pretty good, but I have now switched to Verbatim...just to be safe. Good luck and try all the solutions suggested by Mike and Creaky, they were really helpful!

 

thanks so much to mike and everyone who posted on this thread, i was so worried id have to get my dvd burner fixed or replaced and id wasted so many dvds on it, and now its all fixed. too easy. at the risk of sounding corny, i love you all note to everyone, try what mike suggests first before u waste to many dvds and time and stress!!

 

Car.mike ,

You are right, the blank DVD media I've been using are LEMON. The
level of quality varies from disc to disc evenif they are the
same brand.

From where I'm living, these generic DVD blank media are so cheap
(10 cents a crap) that's why it's so tempting to buy them.
Sometimes you get lucky, most of the times you won't. When I started
buying those expensive ones, the writing error goes away.

Also, I noticed that when a DVD blank disc says its speed rating
is 1x-8x, you have to burn it at 8x. If you burn it at a lower
speed, it will result in a burn failure.

 

Pekchuwi,
You are correct as quality does matter especially in doing Movies. Use the cheap disks for other Data. LOL

Keep burning and come back and help giving advice to others.

 

I have been using Nero and DVD Shrink in different combinations for quite some time now.I have tried other decoders and software to shrink the DVD down to size.
Do not set the size in DVD shrink just set it to 5.
Acouple of questions. Are you writing from the hard drive after you have shrunk. It would be helpfull if you gave the actual settings chosen tfor DVD shrink and also the settings for Nero to use during the burn process.
Just one tip at the moment the burn should be done in DVD high compatibility mode.

 

Hi, I hope it's ok to post my nero log here.
I have a very similar problem.
Have tried a few of the less involved things mentioned.
Am trying to update Nero now.

One interseting thing is the drive reads, copies, plays DVD's just wont burn.
The stack of failed DVD's all appear as CD's on the drives icon in my computa.
All other DVD media reads fine.
I have no disks left to try anything more.
-----------------------------------------------------------------
1A20-021N-0100-1286-0950-6733*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDR/RW DX162D-A> Version: 130F - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600BB-00GUA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY CD-RW CRX216E D: CDRom0
DVDR/RW DX162D-A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 97MB (99828kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.10.2005
NeroAPI
4:27:27 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

4:27:27 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

4:27:27 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

4:27:27 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

4:27:27 PM #5 Text 0 File Writer.cpp, Line 124
Writer DVDR/RW DX162D-A running

4:27:27 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

4:27:27 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:27:27 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:27:27 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media

4:27:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

4:27:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

4:27:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDR/RW DX162D-A, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193

4:27:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:27:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDR/RW DX162D-A ]
--------------------------------------------------------------

4:27:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDR/RW DX162D-A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

4:27:28 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

4:27:28 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

4:27:28 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

4:27:28 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

4:27:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:27:28 PM #21 Text 0 File DVDR.cpp, Line 1944
Recording mode: Sequential Recording Mode

4:27:28 PM #22 Text 0 File Mmc.cpp, Line 20535
Set BUFE: supported -> ON

4:27:28 PM #23 Text 0 File DVDR.cpp, Line 2085
Start write address at LBA 0
DVD high compatibility mode: Yes

4:27:28 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2FFFF h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:27:28 PM #25 Text 0 File DVDR.cpp, Line 5078
Drive: DVDR/RW DX162D-A
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R

4:30:49 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01410000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

4:30:49 PM #27 CDR -1135 File Writer.cpp, Line 304
Write error

4:30:49 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:30:49 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

4:30:49 PM #30 Text 0 File DVDR.cpp, Line 2327
EndDAO: Last written address was 319

4:30:49 PM #31 Text 0 File DVDR.cpp, Line 5078
Drive: DVDR/RW DX162D-A
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R

4:30:49 PM #32 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

4:30:49 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

4:30:49 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 7:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 11:02:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-------------------------------------------------------------

The above registry entry is not there in regedit!
Lots of other strage stuff, but not that. ???

 

Any type of blank DVD inserted into the drive shows "CD-Drive" when I open the disk?!?!?!?

Wierd man!

As I say, it reads anything fine...it just don't want to know about blank DVD disks

Is there anything that can be done before it disappears out the window?

 

victa2,
Welcome to the forum. It would have been nice if you had started a new thread as this one is getting a little long but we will see if we can help you.

Error codes:

1. Remove your Nero serial begins w/ 1A20-................

2. Nero API version: 6.3.1.20
Using interface version: 6.3.1.4

Update your Nero version

3. Physical memory : 254MB (260096kB)
Free physical memory: 97MB (99828kB)

You really are on the low, low , low end of memory. Either increase ram to 512 or cutoff all unneeded processes

4. :27:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

You are trying to write to close to the outer rim. Set target size to - Custom and 4300

5.4:27:28 PM #25 Text 0 File DVDR.cpp, Line 5078
Drive: DVDR/RW DX162D-A
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R

You can not booktype a (-) DVD so uncheck that

6. SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01410000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

7. Disc Manufacturer: SKC Co - .,Ltd.
Try using Verbatim or Taiyo Yuden blank media as the above I think is low quality blank media

The burner is not recog. the blank media you are using

What is the brand name and model # of the burner. You are showing DVDR/RW DX162D-A but I can not figure out who the manuf is?

 

Hi,
Thanks for the reply.
I have downloaded ALL 85Mb of Nero updates.
I have all windows updates appart from service pack 2.
Can never get that 75Mb down without a disconnection.....

I have suspected that problems to do with WinASPI and sony handycam software may have been contributing to my problems.
Although I had never experienced burn failure like this before, my DVD drive was never the same after I uninstalled the handycam software.

The first thing I downloaded from Nero was an updated WIASPI.DLL driver.

After installing updates, I managed a sucsessful burn at slightly less than max speed and size in Nero.

In DVD shrink however........
Tried again and failed at the encoding stage due to low memory ( page file too low or something ).

At least I didn't waste a disk

I am looking for RAM chip to go up to 512 or 1Gb.

Thanks.

Your sugestions were very helpful.

 

Hi,
It looks like you are doing one of two things. First of all it could be that you are trying to use DVD -R when your burner only does DVD +R. This could be why it sees them as cd's.
Also when you are choosing the drive to burn with it should give two choices for the drive, make shure you choose the DVD and not the CD one. I am still unsure why you are not using DVD Shrink to burn your disks as it will size the files correctly without using a specified file size.

 

utespack,
Welcome to the forum. If you Google for that burner you get the site below. It is supposed to burn (-) and (+). This is the info I went on in my answer. If I am incorrect then I stand corrected

http://www.videohelp.com/dvdwriters.php?DVDnameid=814&Search=Search&list=2#comments

Also Shrink does not burn ( just compresses) but it can be setup to use Nero or DVDDecrypter to burn the DVD

 

Hi was just reading through this thread and i have just started having the sam problem when burning with dvd shrink although it does not happen every time ihave pasted the error coding below and if anybody could give me an idea as to what could be wrong that would be great. i have looked thorught the other posts and cant seem to spot mine.

5C80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 08/11/2005 16:40:57

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1604N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON COMBO SOHC-5232K atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON COMBO SOHC-5232K D: CDRom0
PIONEER DVD-RW DVR-106D E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 74MB (76712kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.11.2005
NeroAPI
13:44:02 #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

13:44:02 #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

13:44:02 #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

13:44:03 #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

13:44:03 #5 Text 0 File Reader.cpp, Line 124
Reader running

13:44:03 #6 Text 0 File Writer.cpp, Line 113
Writer E: PIONEER DVD-RW DVR-106D running

13:44:03 #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

13:44:03 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

13:44:03 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

13:44:03 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

13:44:03 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

13:44:03 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO

13:44:03 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

13:44:03 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:44:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

13:44:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

13:44:03 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:44:03 #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

13:44:03 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

13:44:03 #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

13:44:03 #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)

13:44:03 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:44:03 #23 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

13:44:03 #24 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

13:44:03 #25 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

13:44:03 #26 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:44:15 #27 Text 0 File Cdrdrv.cpp, Line 1195
13:44:15.718 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #28 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.718 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #29 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.750 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #30 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.781 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #31 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.812 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #32 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.875 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #33 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.906 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:00 #34 Text 0 File Cdrdrv.cpp, Line 1195
13:45:00.953 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:45:01 #35 Text 0 File Cdrdrv.cpp, Line 1195
13:45:01.000 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:29 #36 Text 0 File Cdrdrv.cpp, Line 1195
13:46:29.125 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:29 #37 Text 0 File Cdrdrv.cpp, Line 1195
13:46:29.281 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:29 #38 Text 0 File Cdrdrv.cpp, Line 1195
13:46:29.312 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #39 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.156 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #40 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.218 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #41 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.265 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #42 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.296 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #43 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.312 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #44 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.328 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #45 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.359 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:31 #46 Text 0 File Cdrdrv.cpp, Line 1195
13:46:31.390 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:36 #47 Text 0 File Cdrdrv.cpp, Line 1195
13:46:36.718 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:46:36 #48 Text 0 File Cdrdrv.cpp, Line 1195
13:46:36.796 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:47:13 #49 Text 0 File Cdrdrv.cpp, Line 1195
13:47:13.687 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:49:01 #50 Text 0 File Cdrdrv.cpp, Line 1195
13:49:01.953 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:50:01 #51 Text 0 File Cdrdrv.cpp, Line 1195
13:50:01.765 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:50:54 #52 Text 0 File Cdrdrv.cpp, Line 1195
13:50:54.093 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:51:07 #53 Text 0 File Cdrdrv.cpp, Line 1195
13:51:07.375 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:51:30 #54 Text 0 File Cdrdrv.cpp, Line 1195
13:51:30.468 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:51:37 #55 Text 0 File Cdrdrv.cpp, Line 1195
13:51:37.703 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:51:42 #56 Text 0 File Cdrdrv.cpp, Line 1195
13:51:42.828 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:52:09 #57 Text 0 File Cdrdrv.cpp, Line 1195
13:52:09.000 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:53:20 #58 Text 0 File Cdrdrv.cpp, Line 1195
13:53:20.171 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:54:15 #59 Text 0 File Cdrdrv.cpp, Line 1195
13:54:15.875 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:54:45 #60 Text 0 File Cdrdrv.cpp, Line 1195
13:54:45.265 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:55:43 #61 Text 0 File Cdrdrv.cpp, Line 1195
13:55:43.031 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:56:08 #62 Text 0 File Cdrdrv.cpp, Line 1195
13:56:08.500 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:56:36 #63 Text 0 File Cdrdrv.cpp, Line 1195
13:56:36.828 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:56:46 #64 Text 0 File Cdrdrv.cpp, Line 1195
13:56:46.453 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:56:56 #65 Text 0 File Cdrdrv.cpp, Line 1195
13:56:56.093 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:56:56 #66 Text 0 File Cdrdrv.cpp, Line 1195
13:56:56.140 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:57:00 #67 Text 0 File Cdrdrv.cpp, Line 1195
13:57:00.234 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:57:14 #68 Text 0 File Cdrdrv.cpp, Line 1195
13:57:14.187 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:57:36 #69 Text 0 File Cdrdrv.cpp, Line 1195
13:57:36.671 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:58:19 #70 Text 0 File Cdrdrv.cpp, Line 1195
13:58:19.718 - E: PIONEER DVD-RW DVR-106D : Queue again later

13:58:38 #71 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 22 B4 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 22 B1 61 0E 00 00 00 00 0C
Buffer x00cd0000: Len x10000
0x00 00 01 BA 44 00 04 09 25 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 C3 68 D1 A3 46 18 6D 1A 34
0x68 C3 0D A3 46 8D 18 61 B4 68 D1 A3 0C 36 8D 1A

13:58:38 #72 CDR -1135 File Writer.cpp, Line 302
Write error
E: PIONEER DVD-RW DVR-106D

13:58:38 #73 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:58:38 #74 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2274335

13:58:38 #75 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)

13:58:38 #76 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

13:58:38 #77 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05/10/2004 23:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/07/2005 06:33:34 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


thanks in advance
lol23

 

Lol23,
Welcome to the forum,

1. Firmware is up to date and that is good
2. Physical memory : 511MB (523760kB)
Free physical memory: 74MB (76712kB)
Memory in use : 85 %

You have some programs that are using up the computers resources. Try cutting off all non-essential programs

3. 13:44:03 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

You need to set the Target size to 4300 and Custom as you are burning too close to the outer rim.

4. 13:58:38 #71 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
The burner does not like the blank media you are using

5. Disc Manufacturer: TTG02
Those are TDK blank media and you need to try better quality disks like Verbatim, Taiyo Yuden, Ritek, Maxell

 

hello guys.....

I'm about to give up on my DVD burner(TSSTcorp CD/DVDW TS-H552A).... it just fails to burn my DVD's at about half-way through... but it could burn CD-R's very well.. T_T

I already had reset the Primary and Secondary IDE Controller to use DMA... My cables are brand new... No Virtual Drives... I have 512MB, and I close all programs before burning... Updated Firmware (BA59) I use Nero 7.0.1.2 and have an Adaptec ASPI of 4.6(I already tried 4.71.2 still it didn't work T_T) I really need your help.... here's my NERO Log... ^_^

Please HELP ME!!! T_T

*****************************************************************
Uruz07
Mirthil
5C8********************

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552A>Version: BA59 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552A>Version: BA59 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST340014A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 253MB (259124kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.11.2005
ISO compilation
2:22:48 AM #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:22:48 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

2:22:48 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

2:22:48 AM #4 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-H552A running

2:22:48 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

2:22:48 AM #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

2:22:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1369935 (304:25.60, 2675MB)

2:22:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

2:22:48 AM #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TSSTcorp CD/DVDW TS-H552A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

2:22:48 AM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:22:48 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1369936 (1369936) = #1369936/304:25.61
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1369936 blocks [E: TSSTcorp CD/DVDW TS-H552A]
--------------------------------------------------------------

2:22:48 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW TS-H552A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2805628928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1369936 | lead-out | 1 | 0x41 | 0x00

2:22:48 AM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:22:48 AM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

2:22:48 AM #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

2:22:48 AM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

2:22:48 AM #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)

2:22:48 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:22:48 AM #19 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

2:22:48 AM #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

2:25:07 AM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 02 B4 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x044a0000: Len x10000
0x9F 8B C5 5F 1D CD D5 1B A8 4C 28 06 29 72 5C 71
0x40 5F 38 E1 B7 46 09 DA 0E C0 E2 6B 4A 81 9E 0E
0x3E 0F 1F FF DE 8D 79 C4 45 A6 C4 77 FA F4 18 3F

2:25:07 AM #22 CDR -1135 File Writer.cpp, Line 302
Write error
E: TSSTcorp CD/DVDW TS-H552A

2:25:07 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:25:07 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

2:25:07 AM #25 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

2:25:07 AM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

2:25:07 AM #27 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders

2:25:07 AM #28 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully

2:25:07 AM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 PM
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)