Dvd Shrink/ Nero illegal disc error

Discussion in 'Nero discussion' started by alishia28, Aug 19, 2006.

Page 1 of 2
  1. alishia28

    alishia28 Member

    Joined:
    Aug 19, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I have looked and looked and tried everything that everyone has listed with no luck. I have never had any problems with burning dvd's. I am having troubles burning on Sony dvd-r. I have burned over 400 movies with this same kind of discs without problems. Now it will start writing the lead in and then it says illegal disc. I have updated my driver, updated Nero to 6.6.0.18 from 6.3.1.11, switched the target dvd size to 4300 and everything with still no luck. I can use off brand dvd's without problems. I thought it was a bad batch of discs so I took them back and tried again. The first one worked but same thing started happening again. Do I need a new burner? It's driving me crazy. Here is the log from the last burn:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e

    Recorder: <DVDRW DRW-3S163> Version: BSG5 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : COMBI RW16x10/DVD atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : DVDRW DRW-3S163 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    COMBI RW16x10/DVD E: CDRom0
    DVDRW DRW-3S163 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 253MB (260080kB)
    Free physical memory: 86MB (88828kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    19.8.2006
    NeroAPI
    7:08:48 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    7:08:48 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    7:08:48 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    7:09:12 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    7:09:12 PM #5 Text 0 File Writer.cpp, Line 122
    Writer DVDRW DRW-3S163 running

    7:09:12 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    7:09:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    7:09:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    7:09:13 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    7:09:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 678927 (150:52.27, 1326MB)

    7:09:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    7:09:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: DVDRW DRW-3S163, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    7:09:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:09:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 678928 (678928) = #678928/150:52.28
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 678928 blocks [DVDRW DRW-3S163]
    --------------------------------------------------------------

    7:09:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [DVDRW DRW-3S163] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1390444544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    678928 | lead-out | 1 | 0x41 | 0x00

    7:09:18 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    7:09:18 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    7:09:18 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    7:09:18 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    7:09:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:09:18 PM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    7:09:18 PM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    7:09:18 PM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:09:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:10:07 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    19:10:07.359 - DVDRW DRW-3S163\H1 T1 : Queue again later

    7:13:51 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09F20000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    7:13:51 PM #27 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    7:13:51 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:13:51 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:13:51 PM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 991

    7:13:51 PM #31 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    7:13:51 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    7:13:51 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/5/2006 10:00:50 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Please Help
    Thanks
    Alishia
     
    alishia28, Aug 19, 2006
    #1
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    gwendolin, Aug 19, 2006
    #2
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    Hi alishia28
    As gwen said not a lot wrong in your log.

    Physical memory : 253MB
    Free physical memory: 86MB
    Memory in use : 65 %
    512mb is better. Add some if you can. In the mean time keep as much memory free as possible. No multi tasking and shut down any unncessary processes.

    Now for the illegal disc - you drive may not have the updated media codes 16x -R media you are using (sony). Usually the reason for this error.
    For your drive -R is max 8x burn- they may not have all the media codes for 16x -R - just a guess.
    What was the rated burn speed on the previous Sony's? How about the off brand that you are able to burn to?
     
    binkie7, Aug 19, 2006
    #3
  4. alishia28

    alishia28 Member

    Joined:
    Aug 19, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I believe they are the same discs. I will have to call Best Buy to find out. I didn't pay attention. If for some reason they don't make the ones I usually use anymore, what would you all suggest that would be around the same prices. $30ish for 50 pack. I have the same problem when I try Maxell. I've unistalled Nero and running the cleaning tool then I will download again. How do I know that all of Nero has been uninstalled?

    Thanks for your help already
    Alishia
     
    alishia28, Aug 19, 2006
    #4
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    16x media is the norm in alot of areas recently (us). 8x or lower is harder to fine. My quess is the ones you were using before were 8x.
    You can check this if you like by popping one of these older burned ones in your drive then go to NeroToolKit>CD-DVD Speed>Disc tab. It will list the supported write speeds.

    Verbatim would be good or Best Buy has a sale tomm on Sony's 100 for 24.99. If you can only find 16x speed try +R instead - may do better w/ these. Your drive is made by Liteon and looks like it supports booktyping. For +R discs you can booktype them to DVD-Rom making them almost universally compatible.

    Uninstall all Nero programs in add/remove programs then run the clean tool and you should be good.

    Keep us posted.

    Oh & no problem on the help :)
     
    binkie7, Aug 19, 2006
    #5
  6. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    3,971
    Likes Received:
    0
    Trophy Points:
    46
    I agree Binkie I think his drive is having problems with the new Sony16X discs.
     
    garmoon, Aug 20, 2006
    #6
  7. alishia28

    alishia28 Member

    Joined:
    Aug 19, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Well I just ran the Nero tool to compare the discs and you are right. The discs I had been using were 8x. I couldn't tell the difference because it doesn't say on the discs and the packages are just alike. Thank you all so much for you help. At least I know now nothing else is wrong.

    Thanks
    Alishia
     
    alishia28, Aug 20, 2006
    #7
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    You're welcome alishia28
    If you want to use the 8x -R media best bet is to get it online.
    You can get genuine Taiyo Yuden -R's for about the same price as instore. They run free shipping specials a lot.
    Great site I use (US)
    http://supermediastore.com
     
    binkie7, Aug 20, 2006
    #8
  9. alishia28

    alishia28 Member

    Joined:
    Aug 19, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Okay, I give up. I got onto bestbuy.com and they had the 8x Sony
    dvd-r discs so I ordered them. Well I got the package today and it was 16x again. So they said that they will send me a new one. If they send me another 16x I'm going to go crazy. My problem is the burner I have says it's a 16x but it won't burn at 16x. Is there a burner that will use 16x disc without any problems? Does that make any since? I just don't like ordering online and all the stores around me are only carrying 16x discs.

    Thanks in Advance
    Alishia
     
    alishia28, Aug 24, 2006
    #9
  10. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    3,971
    Likes Received:
    0
    Trophy Points:
    46
    Almost all new burners will burn discs at 16 X. I would suggest a very cheap but excellent burner, the benQ DW1650, at newegg.com when they have them for about 30-35USD. But you really don't want to burn them that fast any way. I have 2 16X burners and never have written one faster that 8X. I'm using the 8X,Sony MIJ labelled TY T02s +Rs booktyped to DVD-ROM. I burn the 16X verbs at 8X also. I wouldn't order sony discs on line because you could end up with Sony, made in Taiwan, discs which are not so desireable!! JM2C
     
    garmoon, Aug 24, 2006
    #10
  11. mdweaver

    mdweaver Member

    Joined:
    Aug 24, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I myself am having the same issue and then some, using TDK or Ridata Media I find myself unable to burn DVDs and bootable CDS. I have tried the built in burner an LG-GSA4082N which fails. I have sent the laptop to Acer 3 times now to have this resolved, have done an RMA exchange on the DVD drive, using the factory restore discs, using the Adaptec ASPI Layer, reinstalling the driver, reinstalling nero.

    My most recent effort is to use a TDK0400DVRWD usb drive it still fails with the following error. (My firmware is uptodate)


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e

    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
    DiskPeripheral : IC25N080ATMR04-0 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4082N E: CDRom0
    TDK DVDRW0404N F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 759MB (777644kB)
    Free physical memory: 472MB (483616kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.8.2006
    NeroAPI
    2:14:11 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    2:14:11 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    2:14:11 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    2:14:12 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    2:14:12 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    2:14:12 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:14:12 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:14:12 PM #8 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    2:14:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    2:14:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    2:14:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    2:14:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:14:12 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [TDK DVDRW0404N]
    --------------------------------------------------------------

    2:14:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    2:14:12 PM #15 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    2:14:12 PM #16 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    2:14:12 PM #17 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    2:14:12 PM #18 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2.4x (3,324 KB/s)

    2:14:12 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:14:12 PM #20 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    2:14:12 PM #21 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    2:14:12 PM #22 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:14:12 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:14:12 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x30 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    2:14:12 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
    Illegal disc

    2:14:12 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
    Could not perform start of Disc-at-once

    2:14:12 PM #27 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2.4x (3,324 KB/s)

    2:14:12 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    2:14:12 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    mdweaver, Aug 24, 2006
    #11
  12. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    @alishia28
    Your burner may be fine - it's a 16x burner but only for +R discs - 8x max for -R.
    So the 16x -R are probably causing the problem.
    You should be okay w/ good media using 16x +R.

    Yep finding lower rated media in areas is like finding a needle in a haystack :)
    I've used supermediastore along with many others here for over 2 years - no problems and a great place to buy -R 8x Taiyo Yuden. Might want to give it a try.


    @mdweaver
    Looking like you have the same problem. Your burn fails in less than a sec.
    Your drive does not like the media.
    The external hasn't had a firmware update in 2 years. Looks like the internal drive had one last year.

    From the media code in the log TTH02 - this could be either 8x or 16x media.
    For either drive I would try 8x rated media - ones to use are recommended above.
    If you are in the US the link for supermediastore is above too.

    You can also check the aspi & make sure nothing shows as corrupted just in case. Go to NeroToolKit>InfoTool>aspi tab.
     
    binkie7, Aug 24, 2006
    #12
  13. mdweaver

    mdweaver Member

    Joined:
    Aug 24, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    System Aspi shows nothing. NeroAspi looks good. I will try the slow media. Thanks Binkie. Any idea what might be causing the Bootable CD issues? I can burn the disc fine in nero but its missing files when i try to boot. Ill post the internal drive log for the dvd and the burn log of the boot CD shortly.
     
    mdweaver, Aug 24, 2006
    #13
  14. mdweaver

    mdweaver Member

    Joined:
    Aug 24, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Burning the bootable disc

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: HR02 - HA 0 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: HR02 - HA 0 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
    DiskPeripheral : IC25N080ATMR04-0 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4082N E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 759MB (777644kB)
    Free physical memory: 338MB (346468kB)
    Memory in use : 55 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.8.2006
    CD Image
    6:50:32 PM #1 Text 0 File Burncd.cpp, Line 2948
    HL-DT-ST DVDRAM GSA-4082N
    Buffer underrun protection activated

    6:50:32 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    6:50:32 PM #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4082N running

    6:50:32 PM #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Track-At-Once, using CD-R/RW media

    6:50:32 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 296658 ( 65:57.33)

    6:50:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    6:50:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4082N;
    CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
    ATIP Data:
    Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    6:50:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:50:32 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 296659 (296659) = #296659/65:55.34
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296657 blocks [HL-DT-ST DVDRAM GSA-4082N]
    --------------------------------------------------------------

    6:50:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607864832, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    296659 | lead-out | 1 | 0x41 | 0x00

    6:50:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1119
    Removed 2 run-out blocks from end of track 1. Length: 296659 -> 296657.

    6:50:33 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:50:33 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    6:50:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:50:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 24x (3,600 KB/s)

    6:50:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    6:50:33 PM #17 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    6:50:58 PM #18 SCSI -1039 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04090000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x34 0x14 0x04 0x80 0x09 0x01

    6:50:58 PM #19 CDR -1039 File Writer.cpp, Line 311
    Focus or tracking error

    6:50:58 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:50:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    6:50:58 PM #22 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x00 0x3A 0x00

    6:50:58 PM #23 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x038B4C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x00 0x3A 0x00

    6:50:58 PM #24 CDR -1080 File WriterStatus.cpp, Line 197
    Disc not present

    6:50:58 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 197
    Could not perform EndTrack

    6:50:58 PM #26 CDR -201 File WriterStatus.cpp, Line 200
    Invalid write state
    HL-DT-ST DVDRAM GSA-4082N\H0 T1

    6:50:58 PM #27 TRANSFER -18 File WriterStatus.cpp, Line 200
    Could not perform EndTrack

    6:50:58 PM #28 Text 0 File Mmc.cpp, Line 16452
    <HL-DT-STDVDRAM GSA-4082N> start Close Session

    6:50:58 PM #29 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x00 0x3A 0x00

    6:50:58 PM #30 CDR -1080 File WriterStatus.cpp, Line 249
    Disc not present

    6:50:58 PM #31 TRANSFER -19 File WriterStatus.cpp, Line 249
    Could not perform Fixation

    6:50:58 PM #32 Text 0 File WriterStatus.cpp, Line 258
    falling back to disc fixation

    6:50:59 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 24x (3,600 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    mdweaver, Aug 24, 2006
    #14
  15. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    @mdweaver
    Ok you're good on the aspi - you had mentioned aspi in your post so thought might as well check just in case.

    On the bootable cd may not be of much help there but I'll try. What kind of bootable cd are you trying to do?
     
    binkie7, Aug 24, 2006
    #15
  16. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    Ok on the cd - you are using the 'cd-rom boot' option correct? Don't see that in the log but it may not show. Does show cd image.

    This is a failed burn. Most of the errors -like Focus or tracking error can be due to the media.
    CMC Magnetics Corporation doesn't make good cd's or dvd's.
    Better to use cd wise would be made in Japan Fuji & Maxell - usually made by Taiyo Yuden - great for cd's & dvd's.

    Burn process failed at 24x
    For the cmc's try 16x or lower.
     
    binkie7, Aug 24, 2006
    #16
  17. RichieTD

    RichieTD Guest

    OK I had the same problem and have now resolved this.

    I checked the make of my drive then did a firmware update search. One of the flashes (as they are called) deals with the X16 issue.

    Here is a list if that helps.

    http://forum.rpc1.org/dl_all.php
     
    RichieTD, Aug 28, 2006
    #17
  18. Nero63

    Nero63 Guest

    @ richietd
    as you can see, alishia's f/w is up-to-date, have tried to get info on the "gsa4082n" but can only come up with the "gsa4082b", gotta hand it to LG, they haven't updated computer components since '04.

    @ alishia28
    sorry your getting hijacked but if your still having problems, please do not hesistate to post.
    If the slower media fixed the issue let us know, outside of checking your firmware to ensure that it's the latest version, you might consider changing the drive position to master on the cable, a relatively easy switch, position jumper to CS and switch to connector on end of cable, same with your combi-drive, switch jumper to C/S and position to the second/slave position on the cable. You may also wish to check your aspi, as described by binkie7 earlier in the thread.
    @ mdweaver
    where did you get your drive at? e.g. U.S.A., U.K., etc. cannot not find that drive with the "n" option only the "b"

    [bold]edit=typo[/bold]
     
    Last edited by a moderator: Aug 28, 2006
    Nero63, Aug 28, 2006
    #18
  19. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    3,971
    Likes Received:
    0
    Trophy Points:
    46
    @Nero63

    The B and N are next door on the keyboard. Maybe he hit the wrong key.
     
    garmoon, Aug 28, 2006
    #19
  20. Nero63

    Nero63 Guest

    @garmoon
    that's what's got me, his system shows it to be a "gsa-4082-n"
    plus using CMC MAG media, that's not good. Gotta be a european version, but checked the "global site" for LG and nothing on that drive.

    [bold]edit[/bold] typo(s),add. info
     
    Last edited by a moderator: Aug 28, 2006
    Nero63, Aug 28, 2006
    #20
Page 1 of 2

Share This Page