Hey, y'all! I'm having a problem with backing up DVDs. I use Clone DVD and Any DVD. I haven's had problems until recently-the DVD will read but when I go to write and put a blank DVDR in, it's like the DVDR is not being recognized. It just continues to tell me to put a recordable disc in. I've cleaned the writer, reloaded the programs, and tried different DVDRs..nothing works!! Any suggestions???
post what versions of anydvd and clonedvd ye are using...and the type of media you are using and the name of your burner and what firmware is installed.and the name of the movie dvd ye are trying to rip..
Any DVD 6.0.1.1 Clone DVD 2.8.9.9 Phillips DVD+R discs Burner is a Sony Firmware:BYX5 Movies I'm trying to record: Hollow Man 2, Freedomland, and An Unfinished Life-they all do the same thing-read but not write!
Peetle I would have to say that your firmware for your DVD drive needs to be updated or that the type of media is a no no. Try using Verbatim or Tayio, Sony or Maxell. I Use Verbatim if you can get them. Best Buy has an ad for this sunday for a 50 pack of Verbatim for $14.99 and that is a very good price. Most here I believe uses Verbatim or Tayio which are the best out ther. I will use Sony or Maxell which is not bad if I really have to. Good luck....
Thank you-the DVDRs worked fine before-but that is a good price and I think I'll go get some!! I'llalso try updating my firmware. Thanks again!
I actually had that exact same problem and to put it simply what fixed it for me was completley ending the programs, and restarting the comp. and it worked fine. I also took those programs out of my startup options for when the comp. boots up. start-run-msconfig(hit ok)-startup tab-deselect those for startup. Start them up yourself when the comp reboots. You might not have to do that but I did it anyway.
I think my burner in my computer is no good, or on it's way out. Is there anyway to know for sure? My warranty is expiring soon and I would like to get a new burner if needed before warranty expires obviously. Also, I was told that my firmware may need updating. I am very new to all this so could someone tell me how to update my firmware. And dogman thanks for the info with the circuit city CD's I am going to go get some too. Here is my problem and it is just sooo frustrating because I use to be able to burn my kids dvd's all the time now nothing! Please let me know if you can offer any help. Thanks so much...Here is the error log? Is this what you need? I 13:57:13 DVD Decrypter Version 3.5.4.0 started! I 13:57:13 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 13:57:13 Initialising SPTI... I 13:57:13 Searching for SCSI / ATAPI devices... I 13:57:34 Found 1 DVD+RW! I 13:57:44 Operation Started! I 13:57:44 Source File: C:\Documents and Settings\zorro\My Documents\My Movies\SAMANTHA_AMER_GIRL_HOLIDAY.ISO I 13:57:44 Source File Sectors: 2,049,039 (MODE1/2048) I 13:57:44 Source File Size: 4,196,431,872 bytes I 13:57:44 Source File Implementation Identifier: DVD Shrink I 13:57:44 Destination Device: [1:0:0] HL-DT-ST DVD+RW GCA-4040N 1.19 (D (ATA) I 13:57:45 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) I 13:57:45 Destination Media Sectors: 2,295,104 I 13:57:45 Write Mode: DVD I 13:57:45 Write Type: SAO I 13:57:45 Write Speed: MAX I 13:57:45 Link Size: Auto I 13:57:45 Test Mode: No I 13:57:45 BURN-Proof: Enabled I 13:57:45 Filling Buffer... I 13:57:45 Writing LeadIn... W 13:57:53 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80) W 13:57:53 Retrying (1 of 20)... W 13:57:59 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:57:59 Retrying (2 of 20)... W 13:58:06 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:06 Retrying (3 of 20)... W 13:58:11 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:11 Retrying (4 of 20)... W 13:58:17 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:17 Retrying (5 of 20)... W 13:58:23 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:23 Retrying (6 of 20)... W 13:58:29 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:29 Retrying (7 of 20)... W 13:58:35 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:35 Retrying (8 of 20)... W 13:58:41 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:41 Retrying (9 of 20)... W 13:58:47 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:47 Retrying (10 of 20)... W 13:58:53 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:53 Retrying (11 of 20)... W 13:58:59 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:58:59 Retrying (12 of 20)... W 13:59:05 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:05 Retrying (13 of 20)... W 13:59:11 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:11 Retrying (14 of 20)... W 13:59:17 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:17 Retrying (15 of 20)... I 13:59:20 Abort Request Acknowledged W 13:59:23 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:23 Retrying (16 of 20)... W 13:59:29 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:29 Retrying (17 of 20)... W 13:59:35 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:35 Retrying (18 of 20)... W 13:59:41 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:41 Retrying (19 of 20)... W 13:59:47 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 13:59:47 Retrying (20 of 20)... W 13:59:53 Retry Failed! - Unknown (Write Error) (0x0C, 0x80) W 14:01:17 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80) W 14:01:17 Retrying (1 of 20)... W 14:01:22 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:22 Retrying (2 of 20)... W 14:01:28 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:28 Retrying (3 of 20)... W 14:01:34 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:34 Retrying (4 of 20)... W 14:01:40 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:40 Retrying (5 of 20)... W 14:01:46 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:46 Retrying (6 of 20)... W 14:01:52 Retry Failed - Unknown (Write Error) (0x0C, 0x80) W 14:01:52 Retrying (7 of 20)... then I get the error pop up box I/O Error!
