Hi having problems burning on my pionner 106 d drive, every couple of discs the process stops and and get the error saying "communication error", should the buffer level go from 100% to about 90% all the time when burning, im using nero 6.0.0.28b , the used read buffer stays full all the time please help
Hi, there should be no problem if the buffer level on nero drops, even if it drops to 0% as long as you have buffer under-run technology on your drive it should be fine. About the communication error, im afraid i cant help
Still getting communication error thats 15 discs wasted heres my nero log after error hopr this helps does anyone think my burner is goosed. Colin Black Home Use 1a25-0806-7130-1281-9670-3469 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04 Nero version: 6.0.0.28 Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 0 TA 0 - 6.0.0.28 Adapter driver: <atapi> HA 0 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-ROM DVD-119 >Version: 1.08 - HA 1 TA 1 - 6.0.0.28 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-ROM DVD-119 atapi Port 1 ID 1 DMA: On DiskPeripheral : Promise 2+0 Stripe/RAID01.10 Fasttrak Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-106D D: CDRom0 HL-DT-ST CD-RW GCE-8400B E: CDRom1 PIONEER DVD-ROM DVD-119 F: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 767MB (785944kB) Free physical memory: 482MB (494540kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.12.2003 UDF/ISO compilation 19:37:06 #1 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 878 Required file 'VIDEO_TS.IFO' is not present 19:37:06 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 878 Required file 'VIDEO_TS.BUP' is not present 19:37:06 #3 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 878 Required file 'VTS_10_0.BUP' is not present 19:37:06 #4 Phase 117 File dlgbrnst.cpp, Line 1800 DVD-Video files compliance test failed 19:37:14 #5 Phase 132 File dlgbrnst.cpp, Line 1800 DVD-Video files compliance ignored 19:37:14 #6 Text 0 File Isodoc.cpp, Line 6024 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 19:37:14 #7 Phase 111 File dlgbrnst.cpp, Line 1800 DVD-Video files sorted 19:37:14 #8 Text 0 File Reader.cpp, Line 118 Reader running 19:37:14 #9 Text 0 File Writer.cpp, Line 124 Writer PIONEER DVD-RW DVR-106D running 19:37:14 #10 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 19:37:14 #11 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 19:37:14 #12 Text 0 File Burncd.cpp, Line 3128 Turn on Disc-at-once, using DVD media 19:37:14 #13 Text 0 File DlgWaitCD.cpp, Line 237 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 1920399 (426:45.24) 19:37:14 #14 Text 0 File DlgWaitCD.cpp, Line 242 Write in overburning mode: FALSE 19:37:14 #15 Text 0 File DlgWaitCD.cpp, Line 2043 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R Disc Manufacturer: PRINCO - Disc Application Code: 64, Disc Physical Code: 193 19:37:14 #16 Text 0 File DlgWaitCD.cpp, Line 403 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:37:14 #17 Text 0 File ThreadedTransferInterface.cpp, Line 775 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1920400 (1920400) = #1920400/426:45.25 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1920400 blocks [PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 19:37:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 944 Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3932979200, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1920400 | lead-out | 1 | 0x00 | 0x41 19:37:15 #19 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 19:37:15 #20 Text 0 File Burncd.cpp, Line 4095 Cache writing successful. 19:37:15 #21 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 19:37:17 #22 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 19:37:17 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2167 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:37:17 #24 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 11:58,247 (718247ms) -> OK 19:37:17 #25 Text 0 File DVDR.cpp, Line 1259 Recording mode: Sequential Recording Mode 19:37:17 #26 Text 0 File Mmc.cpp, Line 19359 Set BUFE: supported -> ON 19:37:17 #27 Text 0 File DVDR.cpp, Line 1374 Start write address at LBA 0 DVD high compatibility mode: Yes 19:37:17 #28 Text 0 File Cdrdrv.cpp, Line 7912 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:37:29 #29 Text 0 File Cdrdrv.cpp, Line 1276 19:37:29.000 - PIONEER DVD-RW DVR-106D\H0 T0 : Queue again later 19:46:47 #30 SCSI -1024 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x031C0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x16 0x4A 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x13 0x00 0x02 0x0E 0x26 0x01 0x30 0xE6 0x08 0x01 19:46:47 #31 CDR -1024 File Writer.cpp, Line 301 Communication failure 19:46:47 #32 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 19:46:47 #33 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 19:46:47 #34 Text 0 File DVDR.cpp, Line 1578 EndDAO: Last written address was 1460767 19:46:47 #35 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:46:47 #36 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:46:47 #37 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 03/06/2003 02:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 12:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have a Pioneer A05 dvd-r burner. I have had it for about a year. I installed it, everything was working fine and now all of a sudden it's not in my comupter folder. I uninstalled and installed it. I have updated it. I have tried everything. Does anyone have any ideas?
I also had a lot of headaches with Nero. Spent a lot of time with their tech support people..... suggestion: download the updates #1 and #2 from the Nero site. That and more RAM solved my problems. how much RAM do you have? How big is the file you are trying to burn?
I had the same thing. Changed the brand of media I was using (to a Ritek based one) and it went away.
