Hi Champs, I have Dell Inspiron 8600 laptop with NEC DVD+RW ND-6100A DVD Rw Combo. I am able to burn CDs but when i try to burn DVD using Nero, i get the error message shown below. Please advice. Thanks & Regards, The complete log file message is: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <_NEC DVD+RW ND-6100A> Version: 104D - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 1 - 7.2.0.3 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-6100A atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+RW ND-6100A F: CDRom0 NERO IMAGEDRIVE2 H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096360kB) Free physical memory: 1480MB (1516264kB) Memory in use : 27 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.9.2006 ISO compilation 11:50:11 PM #1 Text 0 File Isodoc.cpp, Line 6424 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:50:11 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 11:50:11 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 11:50:11 PM #4 Text 0 File Writer.cpp, Line 113 Writer F: _NEC DVD+RW ND-6100A running 11:50:11 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:50:13 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 11:50:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1041919 (231:32.19, 2034MB) 11:50:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:50:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: _NEC DVD+RW ND-6100A, Media type: DVD+R 11:50:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:50:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1041920 (1041920) = #1041920/231:32.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1041920 blocks [F: _NEC DVD+RW ND-6100A] -------------------------------------------------------------- 11:50:13 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: _NEC DVD+RW ND-6100A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2133852160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1041920 | lead-out | 1 | 0x41 | 0x00 11:50:13 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:50:13 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:50:13 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Unknown BurnPhase 11:50:13 PM #16 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 11:50:13 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Unknown BurnPhase 11:50:13 PM #18 Phase 28 File dlgbrnst.cpp, Line 1730 Unknown BurnPhase 11:50:14 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:52:04 PM #20 Text 0 File WriterStatus.cpp, Line 116 <F: _NEC DVD+RW ND-6100A> start writing Lead-Out at LBA 1041920 (FE600h), length 0 blocks 11:52:04 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:52:04 PM #22 Phase 29 File dlgbrnst.cpp, Line 1679 Unknown BurnPhase 11:52:04 PM #23 Phase 36 File dlgbrnst.cpp, Line 1730 Unknown BurnPhase 11:52:04 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:52:04 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 290 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x0661c400: Len x804 11:52:05 PM #26 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 11:52:23 PM #27 SPTI -1106 File SCSIPassThrough.cpp, Line 290 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x05ea0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:52:23 PM #28 CDR -1106 File Writer.cpp, Line 302 Unknown CDR error F: _NEC DVD+RW ND-6100A 11:52:23 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:52:23 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:52:23 PM #31 Phase 38 File dlgbrnst.cpp, Line 1730 Unknown BurnPhase Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2562 (xpsp.040919-1030), size=96384 bytes, created 10/15/2005 7:11:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thread teleported to relevant forum. a quick glance thru the logfile shows the burners' firmware isn't recognising the blank discs you're trying to use. - firmware is up to date - http://forum.rpc1.org/dl_firmware.php?download_id=1883 [bold]however[/bold] the firmware is too old, dated July 2004, and they've released no new firmware, so i can't see a way forward other than to buy a new drive; your firmware is integral to burning, if it's firmware can't recognise newer media you're gonna have to search high and low for 'older' media that the firmware is able to handle, but it's gonna be easier to spend a few quid/dollars and buy a new drive... - the details of the blanks discs aren't present; this is similar to what you should see - - ie a 3line paragraph when the firmware's up to date. Your burner sounds familiar so i'll have a search thru my old replies and edit this post with any info i find... edit- i thought as much - http://forums.afterdawn.com/thread_jump.cfm/217392/1946822 Basically your firmware is dated July 2004 so is way out of date to be expected to cope with newer media being produced 2 years later.
Hey creaky, Thanks for your time to reply back. By the way, i am using Memorex DVD+R media. And it was previously working fine. I am confused whether the issue is for DVD Writer or Media I will try to use some other media. Can writting speed impact this?? Thanks a lot once again. Regards,
no problem; as per my sig, Memorex use widely differing quality in disc manufacturers, and you won't necessarily get the same discs each time you buy from companies such as Memorex, and worse still you can't tell just from looking at the tub/pack of discs whose discs are actually in the tub/pack. So your problem is twofold, as i've said, the burner's firmware is very old, so you have to stick to discs that the firmware is able to recognise. Also the problem is the discs you're trying to use. We can help you with this a little if you run one of your previously working discs thru a free program such as DVD Identifier and paste here it's 'MID' code ie the exact disc manufacturer etc details. However as i've also said re Memorex, it'll be a lottery as to whether you end up with any that worked previously. From the MID code however we'd know exactly which discs were working and you could then buy those, but branded as that particular manufacturer's disc instead of Memorex's discs..
Error Message reported by DVD Identified when i Insert new Memorex DVD+R 8x DVD ================================================================================ [18:04:26] DVD+R/+RW Medium Detected. Starting Identification... [18:04:26] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [18:04:26] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [18:04:26] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [18:04:26] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [18:04:26] ERROR : ADIP Read M2 Failed : Illegal request - Invalid field in CDB [05/24/00] [18:04:26] INFO : ADIP Read Method 2 Requires A Written DVD+R/+RW Disc [18:04:26] Disc Identification Did Not Complete Successfully Information displayed when i check my existing Memorex DVD+r 8x DVD ================================================================== [18:06:31] DVD+R/+RW Medium Detected. Starting Identification... [18:06:31] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [18:06:31] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [18:06:31] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [18:06:31] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [18:06:32] ADIP Read Method 2 Completed Without Errors [18:06:32] Disc Identification Completed Successfully
Buddy, I installed the latest database. The startup log is: [20:17:50] DVD Identifier V4.3.0 [20:17:50] Initializing Drive Interface [Auto-Select ASPI/SPTI] [20:17:50] SPTI Drive Interface Successfully Initialized [20:17:51] 1 Supported Drive Found (Out Of 2 Available Drives) [20:17:51] Manufacturer Database [01-MAY-06@680$88] Loaded From File : (@680$88) Entries Found [20:17:51] Internet Version Check Postponed Since Last Check Happened Less Than 1 Hour Ago Result of NEW BLANK Imation DVD+R/16x is: ====================================================== [20:21:00] DVD+R/+RW Medium Detected. Starting Identification... [20:21:00] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [20:21:00] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [20:21:00] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [20:21:00] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [20:21:00] ERROR : ADIP Read M2 Failed : Illegal request - Invalid field in CDB [05/24/00] [20:21:00] INFO : ADIP Read Method 2 Requires A Written DVD+R/+RW Disc [20:21:00] Disc Identification Did Not Complete Successfully I bought a new Blank SONY DVD+RW/1x..4x DVD, the result is : ============================================================ [20:22:08] DVD+R/+RW Medium Detected. Starting Identification... [20:22:08] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [20:22:08] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [20:22:08] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [20:22:08] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [20:22:08] ERROR : ADIP Read M2 Failed : Illegal request - Invalid field in CDB [05/24/00] [20:22:08] INFO : ADIP Read Method 2 Requires A Written DVD+R/+RW Disc [20:22:08] Disc Identification Did Not Complete Successfully Result of Already burnt Imation DVD+R 8x is: ============================================== [STATUS tab] [20:25:38] DVD+R/+RW Medium Detected. Starting Identification... [20:25:38] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [20:25:38] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [20:25:38] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted [20:25:38] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [20:25:38] ADIP Read Method 2 Completed Without Errors [20:25:38] Disc Identification Completed Successfully [DRIVE CAPABILITIES ON THIS DISK.. tab] ** INFO : Drive = _NEC DVD+RW ND-6100A - [FW 104D] - [ATAPI] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Disc = [DVD+R:CMC MAG-E01-000] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 8112 kBps ( 6.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 5408 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 3245 kBps ( 2.40x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 4234 kBps ( 3.06x) - [Pure CAV] Descriptor #2 = 2822 kBps ( 2.04x) - [CLV/Non-Pure CAV] Descriptor #3 = 1764 kBps ( 1.27x) - [CLV/Non-Pure CAV] Descriptor #4 = 1411 kBps ( 1.00x) - [CLV/Non-Pure CAV] Descriptor #5 = 706 kBps ( 0.51x) - [CLV/Non-Pure CAV] [Media Code Block.. TAB] ** WARNING : Format 11h (Method 1) Is Recommended ADIP Retrieval Method ** WARNING : Format 00h (Method 2) Data Might Contain Drive Modified Values ** INFO : Hex Dump Of 'Media Code'-Block Listed Below ** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded ** INFO : Format 00h (Method 2) - Physical Information (Copy Of ADIP) 0000 : 01 0f 02 00 00 03 00 00 00 1d b3 8f 00 00 00 00 ................ 0010 : 00 00 03 43 4d 43 20 4d 41 47 00 45 30 31 00 38 ...CMC MAG.E01.8 0020 : 23 54 37 10 02 38 6a 02 88 67 15 15 0b 0b 08 08 #T7..8j..g...... 0030 : 01 19 1b 0c 0c 0c 0d 01 00 00 00 00 00 00 00 00 ................ 0040 : 01 00 38 38 02 27 61 16 08 2e 23 10 04 1e 1d 01 ..88.'a...#..... 0050 : 00 00 02 27 61 16 08 2e 23 10 04 1e 1d 01 00 00 ...'a...#....... 0060 : 02 00 54 70 02 38 67 56 20 14 0b 0b 01 18 00 00 ..Tp.8gV ....... 0070 : 00 00 02 3e 5d 7a 20 14 0c 0a 01 18 00 00 00 2b ...>]z ........+ 0080 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0090 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00f0 : 00 00 00 00 00 00 00 00 ........ HOPE THIS INFORMATION MAY HELP YOU TO GET SOME IDEA.
Imation also feature in my sig, they're another company who uses all manner of different manufacturers' discs, and you won't be able to tell just from looking at them in the shops as to whther they're any good or whther they'll even work. However that 8x Imation, whilst made my CMC Magnetics is the only one out of those you've tried, that is recognised by the drive. I guess you'd best stick to those, but as i say you could buy a pack one day and they may not be recognised as the firmware may not recognise them. At least you could keep the discs to one side and use them if you had a newer burner..
