[serial removed] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.14 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 14d Recorder: <DVDRW IDE 16X> Version: A188 - HA 1 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVDRW IDE 16X E: CDRom0 HL-DT-ST CD-RW GCE-8400B F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 637MB (653296kB) Free physical memory: 270MB (276588kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.7.2005 NeroAPI 3:39:04 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 3:39:04 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 3:39:04 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 3:39:04 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 3:39:04 PM #5 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 3:39:04 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 3:39:04 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 3:39:04 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 3:39:04 PM #9 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 3:39:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1192895 (265:05.20, 2329MB) 3:39:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO 3:39:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 3:39:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:39:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1192896 (1192896) = #1192896/265:5.21 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1192896 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 3:39:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2443051008, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1192896 | lead-out | 1 | 0x41 | 0x00 3:39:04 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 3:39:04 PM #17 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 3:39:04 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 3:39:04 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 3:39:04 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:39:05 PM #21 Text 0 File DVDR.cpp, Line 2316 Recording mode: Sequential Recording Mode 3:39:05 PM #22 Text 0 File Mmc.cpp, Line 21592 Set BUFE: Super Link -> ON 3:39:05 PM #23 Text 0 File DVDR.cpp, Line 2470 Start write address at LBA 0 DVD high compatibility mode: Yes 3:39:05 PM #24 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:39:13 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 15:39:13.812 - DVDRW IDE 16X\H1 T0 : Queue again later 3:39:25 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 3:39:25 PM #27 CDR -1135 File Writer.cpp, Line 311 Write error 3:39:25 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:39:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:39:25 PM #30 Text 0 File DVDR.cpp, Line 2708 EndDAO: Last written address was 607 3:39:25 PM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 3:39:25 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 3:39:25 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. 3:39:57 PM #34 SCSI -1196 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B476400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x02 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x3A 0x02 Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ell i need some help on this here is my error messge posted:
robinstud Edit our your serial # at top. Begins with W1 Your log shows you using and your drive not liking the CMC media. What the exact error message from Shrink? Is your firmware up to date on your drive?
My firmware is up to date. I will change the serial number if i can figure out how and the media is TDK.
Shrink does not give me any exact error message it gives me what i posted earlier. It just stops after 15 of burning and gives me the measse backup coplete with errors. When I click on the errors it gives me that log file that i posted.
robinstud The brand may be TDK but it was made by CMC - which is probably the worst one. The Nero log gives the discs manufacturer. I would also slow the burn speed down tp 4x. Post back with your results.
edited thread title as it was exceptionally long !! lol I would say it could well be burning @ x8 on the CMC coded media might be the problem also ;-) If saving DVD Shrink project as .ISO btw , I would suggest using DVD Decrypter to write image.
You're right about the media, i think it is garbage. I burned it successfully at 4x, so thanks I never did change the serial number but it did burn successfully that time so thanks for the help.
I have been using the file mode, but if the discs are not too lenghty i do use the ISO mode of decrypter for ripping and burning. The problem here is that this media that I bought from Staples in Kent, WA is junk. Found it on sale in memorial day weekend, what a bunch of garbage. TDK my ... This is some junk. I may take some of the unused back.
@robinstud - - update latest ASPI layer, your's doesn't look good - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm - fix DMA settings here (they should all be ON) - http://home.comcast.net/~bbmayo/FAQ.htm - this i'm afraid is the most hideous atrocious media out there. Try something top notch (but costs no more then crap media) such as Verbatim [bold]datalifeplus[/bold] - drive doesn't like that atrocious media ! - whoa slow it down, you're torturing that media, but no more than it deserves lol. But seriously, try burning at 4x, less chance of error - uninstall the packet writing software (InCD) - this is part of Nero that can interfere with standard Nero Burning Rom. I'd uninstall Nero completely, use 'Nero Clean Tools' " http://www.nero.com/us/Clean_Tools.html " to uninstall all traces of Nero, then install again WITHOUT InCD.
I had to reinstall the ide controllers and now they they look like the example, so thanks a bunch and now i'm reinstalling nero.
