Error-2048 Couldn't open the file vts_01_4 vob because it is not a file that quicktime understands I downloaded Music and Lyrics onto DVD Fab5 and it wouldn't burn it. File was too big. Tried it through imag burn and shrink. No luck. Put it through VobBlanker and when i try to open those files I get this message. If I right click the file and have it open in Nero it opens and plays fine. It have the nero pic attached so why is it not working? I'm so new to this. This is the first time I have tried using VobBlanker so it may be something I'm doing. More than likely!
wow steady neddy... one step at a time... ok, what is your actual project? dvd original to dvd backup? as much info as possible, please take your time...
LOL! Hey, I'm new at this!!! Okay, I'm trying to burn Music and Lyrics. Shrink wouldn't do it. So I used DVD Decrypter 5 and put in on my hard drive. Then I tried going through Imag Burn so I could do a test. It said the file was to big to fit on one disc. So I tried using Decypter again and using movie only. Then burning it on verbatim media. It burned half way and then gave me an error message. I put it through Vob Blanker and that program is still confusing to me. HELP!!
no probs music and lyrics is an original dvd and thats the title name? http://www.imdb.com/title/tt0758766/ ok, so you have files sat on your hard drive what dvd decrypter ripped in a folder for you. ok, for a test load those files off your hard drive into dvd shrink, if they load there isnt too much wrong with them, as dvd shrink is picky on structure. do you have the error log from imgburn we may spot something. getting halfway may be the dvdr used, what was yours called? you can use dvd identifier to find out and post the details here, copy/paste etc. --------- another route starting over is: download anydvd trial (set options for your region) then use dvd shrink to rip it, anydvd sits in background taking out protection and allowing dvd shrink to rip it to HD/compress. a full dvd rip use maximum sharp/deep analysis. save to hard drive! then use imgburn to burn. --------- whatever you choose burn slow at 6x and leave pc alone while its doing it.
The second part om my message....taking it slowly....I have the files on my hard drive. When I open my file they show that they would open with Nero. But when I double click on one of the Neros I get the message that I posted first originally above. So I think I might have a problem with Quick Time. When I right click on the same one I can choose to open with a few different programs. I can choose to open with nero and then it will open and play fine. Would any of this make a difference? Another weird this was when I used Imag burn I did teh test first and it went through fine. But when I went to burn it it just kept trying to write it. number of retries was at 9 when I cancelled out of the program. So it never let me burn through it. I started to burn through decrypter 5 and shrink. This is alot of take in. Sorry about that. Not sure what is going on. The DVDR was Verbatim. Movie was indeed the one you posted. How do I change the speed to 6x?
when you right click on the file to open with another software tick the box then highlight nero to open and click save, then from then on quicktime wont be used. now do you have your nero error log to post here please...
not to sure how to find them maybe in my documents/nero or in the nero folder directory. what version nero you got?
====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero API version: 6.6.0.1 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <DVDRW IDE 16X> Version: A089 - HA 1 TA 1 - 6.6.0.1 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : WDC WD2000JS-00MHB1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD-16X DVD-ROM BDV316G atapi Port 1 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVD-16X DVD-ROM BDV316G D: CDRom0 DVDRW IDE 16X E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1015MB (1039852kB) Free physical memory: 460MB (471988kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.6.2008 NeroAPI 5:56:43 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 5:56:43 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 5:56:43 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 5:56:43 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 5:56:43 PM #5 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 5:56:43 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 5:56:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:56:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:56:43 PM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 5:56:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1876703 (417:02.53, 3665MB) 5:56:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 5:56:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 5:56:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:56:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1876704 (1876704) = #1876704/417:2.54 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1876704 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 5:56:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3843489792, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1876704 | lead-out | 1 | 0x00 | 0x41 5:56:44 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 5:56:44 PM #17 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 5:56:44 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 5:56:44 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 5:56:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:56:44 PM #21 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 5:56:44 PM #22 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Super Link -> ON 5:56:44 PM #23 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 5:56:44 PM #24 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:56:55 PM #25 SCSI -1015 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00C60000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x02 5:56:55 PM #26 CDR -1015 File Writer.cpp, Line 311 Calibration area full 5:56:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:56:55 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 5:56:55 PM #29 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was -1 5:56:55 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 5:56:55 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 5:56:55 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [10.06.2008]------------------------------------ 17:56:43 Robot error messages from: ====== *** NeroAPI, History File *** ======
Okay. I was trying to edit this message to take off my nero info. Not sure how to do that. I accidentally posted twice. Sorry about that. How do I edit my post?
Disc Manufacturer: CMC MA - G. AM3 change these dvdrs from trash to something that will work like VERBATIM or TAIYO YUDEN also burn at half the rated speed Burn process failed at 16x (22,160 KB/s) 16x on CMC MAG is a road to nowhere... ------- editing your post: look to the right side of the section of posting, you will see a small picture above click it.
I wish it were that easy. I tried MANY times to burn with Verbatim. I gave up and went with TDK and Sony because they were cheeper and I was hoping I could use the cheaper stuff to figure out the problem with. When i used Verbatim it would burn half way and then quit. I will try to find the error log with Verbatim.
6/12/2008 8:22:46 PM error Write error at 1255744 (16) - Code 05 21 02 [Illegal request, Invalid address for Write] 6/12/2008 8:22:46 PM warning Reporting invalid address for write during recovery - trying to continue 6/12/2008 8:22:46 PM warning at sector 1255728 (16) - recover sequence started 6/12/2008 8:22:46 PM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0 6/12/2008 8:22:46 PM info Try #0 - duration 41561570 µs 6/12/2008 8:18:12 PM info Lead-in burning time (mS) 9408 6/12/2008 8:18:03 PM info Write started 2202032 sectors to write 6/12/2008 8:18:03 PM info Init success: DVD-R packet writing 6/12/2008 8:18:03 PM info Writing speed requested x16.0, effective x16.0 6/12/2008 8:18:03 PM info Available write speed: 16x, 12x, 8x, 4x 6/12/2008 8:18:03 PM info Media ID: MCC 03RG20 6/12/2008 8:18:03 PM info Media type: DVD-R 6/12/2008 8:18:03 PM info Ultra DMA mode 4 (ATA66) 6/12/2008 8:18:00 PM info Scanned files #9, folder #2 - total size 4508661760 b. (4.2 Gb.) 6/12/2008 8:18:00 PM info Inserted media type : DVD-R 6/12/2008 8:18:00 PM info Write started 6/12/2008 8:06:59 PM info New media inserted. Burning layer is ready to write 6/12/2008 8:06:58 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R 6/12/2008 8:06:58 PM info New Drive selected : 1:1:0 - DVDRW IDE 16X A089 [E] (Ide) 6/12/2008 8:06:37 PM info New media inserted. Burning layer is ready to write 6/12/2008 8:06:34 PM info Current Drive selected : 1:1:0 - DVDRW IDE 16X A089 [E] (Ide) 6/12/2008 8:06:34 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode 6/12/2008 8:06:34 PM info User default language : 1033 (0x0409h) - English (United States) 6/12/2008 8:06:34 PM info System default language : 1033 (0x0409h) - English (United States) 6/12/2008 8:06:34 PM info DLL Version 2.1.7.338 6/12/2008 8:06:34 PM info DLL C:\Program Files\DVDFab 5\vso_hwe.dll 6/12/2008 8:06:34 PM info Version 5, 0, 3, 0 6/12/2008 8:06:34 PM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe" 6/12/2008 8:06:34 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600) 6/12/2008 8:06:34 PM info ******************** Report session started ******************** I'm not sure how I change the write speed with DVD Decypter5. That just may be my problem.
