Encountered the following error when trying to burn a DVD. I upgraded to Nero 7.0, since I've had numerous issues with 6, but I got the same exact error with both 6 and 7. Here's the log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.5.1.1 Internal Version: 7, 5, 1, 1 (Nero Express) Recorder: <GENERIC DVD RW 12XMax> Version: 110I - HA 1 TA 0 - 7.5.1.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CDRW/DVD TSH492B>Version: TB04 - HA 1 TA 1 - 7.5.1.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : GENERIC DVD RW 12XMax atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 1 DMA: Off DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === GENERIC DVD RW 12XMax D: CDRom0 TSSTcorp CDRW/DVD TSH492B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (522316kB) Free physical memory: 237MB (243560kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.9.2006 DVD-Copy on the fly 4:14:48 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:14:48 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 72704KB of Memory 4:14:48 PM #3 Text 0 File Reader.cpp, Line 126 Reader running 4:14:48 PM #4 Text 0 File DVDCopy.cpp, Line 316 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2090335 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 4:14:48 PM #5 Text 0 File DVDCopy.cpp, Line 431 Max -1 tracks of 1 allowed to copy 1: 0 - 2090335 = 2090335, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:14:48 PM #6 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 4:14:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2090334 (464:31.09, 4082MB) 4:14:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 4:14:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: GENERIC DVD RW 12XMax, Media type: DVD-R Disc Manufacturer: TYG03 - Disc Application Code: 64, Disc Physical Code: 193 4:14:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:14:49 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2090335 (2090335) = #2090335/464:31.10 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2090335 blocks [D: GENERIC DVD RW 12XMax] -------------------------------------------------------------- 4:14:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [D: GENERIC DVD RW 12XMax] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4281006080, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2090335 | 2090335 | 0x00 0 | 1 | 1 | 0x41 | 2090335 | 2090335 | 0x00 2090335 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:14:49 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:14:49 PM #14 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 4:14:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:14:49 PM #16 Text 0 File DVDR.cpp, Line 2969 Recording mode: Sequential Recording Mode 4:14:49 PM #17 Text 0 File DVDR.cpp, Line 3125 Start write address at LBA 0 DVD high compatibility mode: Yes 4:14:49 PM #18 Text 0 File Cdrdrv.cpp, Line 9215 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:14:56 PM #19 SPTI -1047 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 00 60 00 00 20 00 00 00 Sense Area: 0xF0 00 05 00 00 00 00 0A 00 00 00 00 64 Buffer x066b5000: Len x10000 4:14:56 PM #20 TRANSFER -25 File Reader.cpp, Line 366 Error reading data 4:14:56 PM #21 Text 0 File Reader.cpp, Line 369 Exception value: -1047 4:14:56 PM #22 Text 0 File ThreadedTransfer.cpp, Line 235 conversion failed, stopping writers 4:14:56 PM #23 Text 0 File ThreadedTransfer.cpp, Line 244 conversion idle, but hasn't stopped writer, stopping it 4:14:57 PM #24 Text 0 File DVDR.cpp, Line 3341 EndDAO: Last written address was -1 4:14:57 PM #25 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. Are you trying to use the Copy Entire Disk option in Nero? Is the disk copy protected? If it is copy protected this likely won't work. If not copy protected, try to rip the disk to be copied to your HDD with DVD Decrypter in mode ISO -> Read. Then switch the mode of DVD Decrypter to ISO -> Write and see if you can make the copy in that manner. http://www.filehippo.com/download_dvd_decrypter/
Hi tommich Here's some suggestions: Turn DMA back on for this drive - looks like you are reading from this drive and DMA not on may be playing into the error reading data. Here's a guide if needed: http://forums.afterdawn.com/thread_view.cfm/260038 Turn this off - does the reading and writing in real time so any little glitch and bam burn failed. Best to save to the hard drive even temporarily. Gives the drive time to read the disc. The drives being in different transfer modes when using this option will probably also cause it to fail. Check the back of the source disc - any scratches or smudges? Keep us posted.
Thanks Binkie. I did everything you said, and am not which one it was that did the trick, but I stopped getting that error and was able to burn.
