Hi, I'm attempting to burn a data DVD-ROM, but keep getting an error. I'm using the Nero software included with the external Sony DVD/CD RW drive (Model No: DRX-710UL). I've noticed that other people with problems post the log file, so here's mine. Any help would be greatly appreciated! Oh, the error messages I receive are: Could not perform end of disk-at-once. Could not perform End session. Burn process failed at 2.4x Again, thanks for any and all help. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <SONY DVD RW DRU-710A> Version: BY01 - HA 2 TA 0 - 6.6.0.13 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <E-IDE CD-ROM 52X/AKH >Version: A66 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : E-IDE CD-ROM 52X/AKH atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === E-IDE CD-ROM 52X/AKH E: CDRom0 SONY DVD RW DRU-710A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 219MB (224296kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.5.2005 ISO compilation 1:57:22 PM #1 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:57:22 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 1:57:22 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-710A running 1:57:22 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 1:57:22 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 1:57:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2326463 (516:59.38, 4543MB) Last address to be written: 2326431 (516:59.06, 4543MB) 1:57:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 1:57:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: SONY DVD RW DRU-710A, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 1:57:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:57:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2326432 (2326432) = #2326432/516:59.7 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2326432 blocks [SONY DVD RW DRU-710A] -------------------------------------------------------------- 1:57:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4764532736, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2326432 | lead-out | 1 | 0x41 | 0x00 1:57:23 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 1:57:24 PM #13 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 1:57:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 1:57:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 1:57:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:57:24 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 441 L0 Data Zone Capacity already set to 1163232 (11BFE0h, 2271MB), requested last LBA L0 0 (0h, 0MB) ignored 1:57:24 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 544 Burning Layer 1 1:57:24 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 552 Start writing layer 1 at address 0 (0h) 1:57:24 PM #20 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 14BFDF h (LBN: 11BFDF h, 2271 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: D01 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@ 25 25 37 00 00 28 64 00 - 28 64 19 1B 0B 0B 0E 0F %%7..(d.(d...... 01 00 00 00 00 19 1B 0B - 0B 0E 0F 01 00 00 00 00 ................ 1:57:24 PM #21 CDR -1207 File DVDR.cpp, Line 4786 Book Type automatically set to: Current recorder setting 1:57:24 PM #22 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: Yes 1:57:26 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04280000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:26 PM #24 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04811200 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:26 PM #25 Text 0 File Mmc.cpp, Line 19101 Writer-Buffer for SONY DVD RW DRU-710A\H2 T0 reduced to 32768Bytes 1:57:26 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04811200 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:26 PM #27 CDR -500 File Writer.cpp, Line 311 SCSI command aborted SONY DVD RW DRU-710A\H2 T0 1:57:26 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:57:27 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:57:27 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:27 PM #31 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:27 PM #32 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 1:57:27 PM #33 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04811200 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:27 PM #34 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04811000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:27 PM #35 CDR -500 File WriterStatus.cpp, Line 167 SCSI command aborted SONY DVD RW DRU-710A\H2 T0 1:57:27 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 1:57:27 PM #37 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038F22B8 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:27 PM #38 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038F22B8 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:28 PM #39 CDR -500 File WriterStatus.cpp, Line 172 SCSI command aborted SONY DVD RW DRU-710A\H2 T0 1:57:28 PM #40 TRANSFER -39 File WriterStatus.cpp, Line 172 Could not perform EndSession 1:57:28 PM #41 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) 1:57:28 PM #42 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:57:28 PM #43 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Perhaps, you might want to upgrade your 710A firm ware, it's latest is "BYX4" -- this will support writing performance and reliability. To upgrade, go here: http://sony.storagesupport.com - however, the choice is yours. Looks like you're backing up on a "RITEK DVD+R DL media," but I look through the "error log" and didn't see/say anything about the second layer. Did you set in "Nero" to burn as a DVD9 or DVD5? If you already did set in DVD9, then I, too, am clueless. Maybe this is the problem. Did you burned the data from a HD or from a straight DVD(Data) disc? Maybe the data/file/dvd disc you're trying to burn from is bad or anything i.e. corrupted or scratched. I may be wrong though, plus I'm not an "expert" on Nero and its stuff, so hopefully someone with more knowledge will be able to resolve this for you.
hi external Sony DVD/CD RW drive (Model No: DRX-710UL). are the cables ok? have you the latest usb drivers?
I had a similar problem with trying to burn TDK DVD-R media. I called TDK and customer service told me there is an inherent problem that Nero has with burning DVD-R's. Perhaps try some other burning software. I use Roxio and it works fine.
Hi all, thanks for the great feedback. I was able to successfully burn a CD and a dual layer DVD on my Mac using Roxio Toast 6, so maybe it is the Nero burning software. Funny though, this drive isn't "supported" for the Mac, yet it's the only computer that it works on for me. I'll see if I can't find some other burning software to use for the PC. I did upgrade the firmware as suggested, but still encountered the same problem. And I'm burning data from the HD, not another DVD disc. In fact, I'm not attempting to burn a movie or anything like that, it's a Norton Ghost image for work. If there are any other suggestions, I'll be glad to hear them. This forum is great, so many knowledgeable people. Oh, I did notice one other weird little quirk, not sure if it's related or not. After upgrading the firmware, I can choose what speed to burn the DVD at, and also the checkbox for simulation is available. After my failed burn though, the only speed I can burn at is 2.4x, and the simulation check box is grayed out. Even after restarting the computer. Do you think this is related?
