Hi, Im getting a problem when I try to burn an AVI file. I get an unknown error. Should I reinstall Nero? I have been trying to burn these for a long time. If anyone can help, thank you in advance!
Hello there. You can post the last section of your Nero history. It can be found here: Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt Sections are seperated by dividers such as ==================== Just remember to edit out your name & serial number at top which usually starts with IA23 or similar.
It is Nero 6 files trying to burn are Avi files. Pretty much, what I am trying to do is: convert the AVI files to mpeg1 or mpeg2 so that they may fit in a DVD Then burn them onto a DVD with menus. I thought you could do that with Nero 6. I actually got to make a couple of DVD's with the AVI files. Thanks !! really really appreciate it!
You can burn AVI files without converting them, using Nero. Theres a guide by alkohol in my sig...he uses Nero7 but you can use Nero6 the same way.
yes, I read the guide by alkohol but every time it it gets to the point where it is transferring data and getting ready to encode it hits an error. This is with every avi file. I wish I could show you the screen shots. Is there anyway to wipe out nero entirely and reinstall?
Uninstall, run this clean tool to remove all traces http://ww2.nero.com/nero6/en/Clean_Tools.html and then try to download this version http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
thanks for the links, I reinstalled and I get the same error again. When I put the choose the avi file and go to try to burn just one file it stops again.. any other suggetions?
I tried creating a vcd using avi files, just to see if i could, and it gives me the same message as when trying to create a dvd. I tried looking for the nero 6 history log but it is not there. The message is not specific, it just asks me if I want to save and that an error log is being created... I just wish I could see this error log and paste it here. And all of this happens when it is trying to transcode, when it loads the file this is when it happens. Thank you for your help!
Found it! finally ==================================================================== Nero API version: 6.6.0.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <SONY DVD RW DRU-720A> Version: JY01 - HA 2 TA 1 - 6.6.0.2 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3200826AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552L atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552 E: CDRom0 SONY DVD RW DRU-720A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981480kB) Free physical memory: 398MB (408532kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.5.2006 NeroAPI 12:07:53 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:07:53 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:07:53 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:07:53 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:07:53 AM #5 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-720A running 12:07:53 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:07:53 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:07:53 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:07:53 AM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 12:07:54 AM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2116543 (470:20.43, 4133MB) 12:07:54 AM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 12:07:54 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD RW DRU-720A, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 12:07:54 AM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:07:54 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2116544 (2116544) = #2116544/470:20.44 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2116544 blocks [SONY DVD RW DRU-720A] -------------------------------------------------------------- 12:07:54 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4334682112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2116544 | lead-out | 1 | 0x00 | 0x41 12:07:54 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:07:54 AM #17 Text 0 File Burncd.cpp, Line 4004 Cache writing successful. 12:07:54 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:07:54 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 12:07:54 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2568 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:07:54 AM #21 Text 0 File DVDR.cpp, Line 2202 Recording mode: Sequential Recording Mode 12:07:54 AM #22 Text 0 File Mmc.cpp, Line 20869 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 12:07:54 AM #23 Text 0 File DVDR.cpp, Line 2343 Start write address at LBA 0 DVD high compatibility mode: Yes 12:07:54 AM #24 Text 0 File Cdrdrv.cpp, Line 8310 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:07:54 AM #25 Text 0 File DVDR.cpp, Line 5291 Drive: SONY DVD RW DRU-720A Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:08:45 AM #26 Text 0 File Cdrdrv.cpp, Line 1283 00:08:45.690 - SONY DVD RW DRU-720A\H2 T1 : Queue again later 12:13:58 AM #27 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-720A > start writing Lead-Out at LBA 2116544 (204BC0h), lenght 0 blocks 12:13:58 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:13:58 AM #29 Text 0 File DVDR.cpp, Line 2586 EndDAO: Last written address was 2116543 12:14:08 AM #30 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 16x (22,160 KB/s) 12:14:10 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:14:10 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 1:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [15.05.2006]------------------------------------ 00:07:53 Robot error messages from: ====== *** NeroAPI, History File *** ====== 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <SONY DVD RW DRU-720A> Version: JY01 - HA 2 TA 1 - 6.6.0.2 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3200826AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552L atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552 E: CDRom0 SONY DVD RW DRU-720A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981480kB) Free physical memory: 386MB (395808kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.5.2006 NeroAPI 12:38:44 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:38:44 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:38:44 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:38:44 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:38:44 AM #5 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-720A running 12:38:44 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:38:44 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:38:44 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:38:44 AM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 12:38:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2022031 (449:20.31, 3949MB) 12:38:44 AM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 12:38:44 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD RW DRU-720A, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 12:38:44 AM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:38:44 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2022032 (2022032) = #2022032/449:20.32 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2022032 blocks [SONY DVD RW DRU-720A] -------------------------------------------------------------- 12:38:44 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4141121536, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2022032 | lead-out | 1 | 0x00 | 0x41 12:38:44 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:38:44 AM #17 Text 0 File Burncd.cpp, Line 4004 Cache writing successful. 12:38:44 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:38:44 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 12:38:44 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2568 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:38:44 AM #21 Text 0 File DVDR.cpp, Line 2202 Recording mode: Sequential Recording Mode 12:38:44 AM #22 Text 0 File Mmc.cpp, Line 20869 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 12:38:44 AM #23 Text 0 File DVDR.cpp, Line 2343 Start write address at LBA 0 DVD high compatibility mode: Yes 12:38:44 AM #24 Text 0 File Cdrdrv.cpp, Line 8310 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:38:44 AM #25 Text 0 File DVDR.cpp, Line 5291 Drive: SONY DVD RW DRU-720A Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:39:35 AM #26 Text 0 File Cdrdrv.cpp, Line 1283 00:39:35.753 - SONY DVD RW DRU-720A\H2 T1 : Queue again later 12:44:39 AM #27 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-720A > start writing Lead-Out at LBA 2022032 (1EDA90h), lenght 0 blocks 12:44:39 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:44:39 AM #29 Text 0 File DVDR.cpp, Line 2586 EndDAO: Last written address was 2022031 12:44:47 AM #30 Text 0 File DVDR.cpp, Line 5291 Drive: SONY DVD RW DRU-720A Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:44:47 AM #31 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 16x (22,160 KB/s) 12:44:48 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:44:48 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 1:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [15.05.2006]------------------------------------ 00:38:44 Robot error messages from: ====== *** NeroAPI, History File *** ====== 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <SONY DVD RW DRU-720A> Version: JY01 - HA 2 TA 1 - 6.6.0.2 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3200826AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552L atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552 E: CDRom0 SONY DVD RW DRU-720A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981480kB) Free physical memory: 444MB (455140kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.5.2006 NeroAPI 1:19:20 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 1:19:20 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 1:19:20 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 1:19:20 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 1:19:20 AM #5 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-720A running 1:19:20 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 1:19:20 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:19:20 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:19:20 AM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 1:19:21 AM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 1:19:21 AM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 1:19:21 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD RW DRU-720A, Media type: DVD+R Disc Manufacturer ID: PHILIPS, Media Type ID: C16, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 1:19:21 AM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:19:21 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-720A] -------------------------------------------------------------- 1:19:21 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 1:19:21 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 1:19:21 AM #17 Text 0 File Burncd.cpp, Line 4004 Cache writing successful. 1:19:21 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 1:19:21 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 12x (16,620 KB/s) 1:19:21 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2568 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:19:21 AM #21 Text 0 File Cdrdrv.cpp, Line 8310 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: PHILIPS. Media type ID: C16 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 50 48 49 4C 49 - 50 53 00 43 31 36 01 38 ...PHILIPS.C16.8 23 54 37 12 02 5A 6E 02 - B0 68 16 16 0B 0B 0A 0A #T7..Zn..h...... 01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 1:19:21 AM #22 Text 0 File DVDR.cpp, Line 5291 Drive: SONY DVD RW DRU-720A Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 1:19:21 AM #23 Text 0 File DVDPlusRW.cpp, Line 606 Start write address at LBA 0 DVD high compatibility mode: Yes 1:26:36 AM #24 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-720A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 1:26:36 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:26:55 AM #26 Text 0 File DVDR.cpp, Line 5291 Drive: SONY DVD RW DRU-720A Book Type request: DVD+R Changing the Book Type was finished successfully, return code 0 1:26:55 AM #27 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 12x (16,620 KB/s) 1:26:56 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 1:26:56 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 1:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [15.05.2006]------------------------------------ 01:19:20 Robot error messages from: ====== *** NeroAPI, History File *** ======
I haven't read the log yet, but maybe you don't have a correct codec installed. Try downloading and installing K-Lite codec pack...that may help with the error. K-Lite Codec Pack (Full): http://www.free-codecs.com/download_soft.php?d=1748&s=95
First thing, edit out your serial number Update your Nero from here http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe I think these might be TDK..not top quality, try some Verbatim or Sony (made in japan) Update your firmware from here http://sony.storagesupport.com/dvdrw/downloads/720FWJY08/720A_JY08.zip Burning way too fast, slow to 4X
ok, this is getting kind of bad... i updated the driver for the sony burner, updated the nero software and downloaded the codecs. it is giving me the same error message but when it gets ready to burn. Ill try to get the Error log in here again. Im sorry for all the trouble.
