Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.2.8.0 Internal Version: 8, 2, 8, 0 (Nero Express) Recorder: <SONY DVD RW AW-Q170A> Version: 1.72 - HA 1 TA 0 - 8.2.8.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <SONY DVD RW AW-Q170A >Version: 1.72 - HA 1 TA 0 - 8.2.8.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3500630A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW AW-Q170A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW AW-Q170A D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096368kB) Free physical memory: 1319MB (1350960kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.9.2008 CD Image 5:02:55 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:02:56 AM #2 Text 0 File Burncd.cpp, Line 3188 SONY DVD RW AW-Q170A Super Link activated 5:02:56 AM #3 Text 0 File Burncd.cpp, Line 3502 Turn on Disc-At-Once, using CD-R/RW media 5:02:56 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 288213 ( 64:04.63) 5:02:56 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:02:56 AM #6 Text 0 File DlgWaitCD.cpp, Line 2957 Recorder: SONY DVD RW AW-Q170A; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 5:02:56 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:02:56 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 762 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 288214 (288214) = #288214/64:2.64 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 288214 blocks [D: SONY DVD RW AW-Q170A] -------------------------------------------------------------- 5:02:56 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 964 Prepare [D: SONY DVD RW AW-Q170A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 590569472, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 288214 | 288214 | 0x00 288214 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:02:56 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 5:02:56 AM #11 Text 0 File Burncd.cpp, Line 4288 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 5:02:56 AM #12 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 5:02:56 AM #13 Text 0 File Burncd.cpp, Line 4407 Cache writing successful. 5:02:56 AM #14 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 5:02:56 AM #15 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 48x (7,200 KB/s) 5:02:56 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2681 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:02:56 AM #17 Text 0 File MMC.cpp, Line 17817 StartDAO : CD-Text - Off 5:02:56 AM #18 Text 0 File MMC.cpp, Line 22500 Set BUFE: Super Link -> ON 5:02:56 AM #19 Text 0 File MMC.cpp, Line 18045 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 40 04 40 5:02:56 AM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 5:03:14 AM #21 SPTI -1502 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502) CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03 Buffer x064e00c0: Len x10000 0x22 00 40 00 00 00 00 00 00 40 00 08 00 00 00 00 0x08 00 6B 05 09 12 36 20 08 02 00 00 01 00 00 01 0x01 00 22 00 3B 00 00 00 00 00 00 3B 00 08 00 00 5:03:14 AM #22 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error D: SONY DVD RW AW-Q170A 5:03:44 AM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0xF0 00 03 00 00 00 41 0A 00 00 00 00 0C 5:03:44 AM #24 CDR -1135 File WriterStatus.cpp, Line 287 Write error D: SONY DVD RW AW-Q170A 5:03:44 AM #25 TRANSFER -24 File WriterStatus.cpp, Line 287 Could not perform end of Disc-at-once 5:03:44 AM #26 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 5:03:44 AM #27 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:03:46 AM #28 Text 0 File Cdrdrv.cpp, Line 11391 DriveLocker: UnLockVolume completed 5:03:46 AM #29 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL this happens whenever i try to burn anything. i thought it was my drive, and i grabbed an extra one from friend and im getting this same error. any suggestions? I downloaded new firmware but its a flaky bit of software and i dont think its a good idea.
You've got some good news and some bad news comin'. For starters the brand of disc (media) your using is CMC mag.....oh dear. Get Verbatim or at worst TDK's (generally speaking). Second is the burn speed. Even with your current "stocks" of CMC, burn at least half the rated speed. According to the log info it was at 48X so try the same project again at let's say...16X. This should make an improvement. Thirdly, it's been my and many others experience that NERO 8 seemes to be a little "buggy". I had a slightly earlier version than yours and it was so unpredictable, i had no choice but to uninstall and revert back to my original NERO version 6. As it happens, nero 6 wasn't the best ever either, but it worked flawlessly on even crappy media....like TDK's....LOL. Almost last but not least, don't do anything at all on your machine while encoding or burning etc. System resources can be strained at times and so produce irratic results. Still waiting for the good news i suppose? Well your memory that's in use is reaching the dizzying heights of 35%. The capacity available with regard of whats in use is actually very good. At least you don't have to upgrade.... How'd you get on?
Interesting error.. looks like something wrong with the aspi driver or a bus problem. I would take a good look at the cables and the ram.
Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.2.8.0 Internal Version: 8, 2, 8, 0 Recorder: <SONY DVD RW AW-Q170A> Version: 1.72 - HA 1 TA 0 - 8.2.8.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <SONY DVD RW AW-Q170A >Version: 1.72 - HA 1 TA 0 - 8.2.8.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3500630A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW AW-Q170A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW AW-Q170A D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096368kB) Free physical memory: 1281MB (1312620kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.9.2008 CD Image 2:54:06 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:54:06 PM #2 Text 0 File Burncd.cpp, Line 3188 SONY DVD RW AW-Q170A Super Link activated 2:54:06 PM #3 Text 0 File Burncd.cpp, Line 3502 Turn on Disc-At-Once, using CD-R/RW media 2:54:06 PM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 288213 ( 64:04.63) 2:54:06 PM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 2:54:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 2957 Recorder: SONY DVD RW AW-Q170A; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 2:54:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:54:06 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 762 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 288214 (288214) = #288214/64:2.64 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 288214 blocks [D: SONY DVD RW AW-Q170A] -------------------------------------------------------------- 2:54:06 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 964 Prepare [D: SONY DVD RW AW-Q170A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 590569472, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 288214 | 288214 | 0x00 288214 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:54:06 PM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 2:54:06 PM #11 Text 0 File Burncd.cpp, Line 4288 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 2:54:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 2:54:06 PM #13 Text 0 File Burncd.cpp, Line 4407 Cache writing successful. 2:54:06 PM #14 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 2:54:06 PM #15 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 16x (2,400 KB/s) 2:54:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2681 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 2:54:06 PM #17 Text 0 File MMC.cpp, Line 17817 StartDAO : CD-Text - Off 2:54:06 PM #18 Text 0 File MMC.cpp, Line 22500 Set BUFE: Super Link -> ON 2:54:06 PM #19 Text 0 File MMC.cpp, Line 18045 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 40 04 40 2:54:06 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 2:54:24 PM #21 SPTI -1502 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502) CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03 Buffer x065100c0: Len x10000 0x22 00 40 00 00 00 00 00 00 40 00 08 00 00 00 00 0x08 00 6B 05 09 12 36 20 08 02 00 00 01 00 00 01 0x01 00 22 00 3B 00 00 00 00 00 00 3B 00 08 00 00 2:54:24 PM #22 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error D: SONY DVD RW AW-Q170A 2:54:35 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0xF0 00 03 00 00 00 41 0A 00 00 00 00 0C 2:54:35 PM #24 CDR -1135 File WriterStatus.cpp, Line 287 Write error D: SONY DVD RW AW-Q170A 2:54:35 PM #25 TRANSFER -24 File WriterStatus.cpp, Line 287 Could not perform end of Disc-at-once 2:54:35 PM #26 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 16x (2,400 KB/s) 2:54:35 PM #27 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:54:38 PM #28 Text 0 File Cdrdrv.cpp, Line 11391 DriveLocker: UnLockVolume completed 2:54:38 PM #29 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL thats what i get when i turned the speed down to 16x ive gotten this error with different kinds of cds/dvds id reformat but i dont know if that would help at all...
also here are my system specs if that helps AsRock 1689-Upgrade MoBo AMD64 3700+ (2.4Ghz, Sock754) 2 Gigs of Ocz DDR 800 500Gb Pata HDD (Seagate) Nvidia 6800GT OC the drive im having an issue with is a Sony DVD RW AW-Q170A
