Hi Can anybody help me out, I have a eurovox blue clone. It just stopped working, when I turn it on it just stays on standby. Constant single Red Light. Do I need to J tag the box? Any help would be appreciated
hav e a read in here courtesy of celtic71 and sc0ucer http://forums.afterdawn.com/thread_view.cfm/562687
karljd/sc0user/celtic71 Thanks for the info, I'll check the power supply and if thats ok i'll buy a J tag. Thanks again
Hi I bought a Jtag and connected it to my PC, ran the Skymax software and everyting seemed to go to plan. Init JTAG IDCODE : 1D405041 CPU : STi5518 Stop CPU Clear Trap : Please Wait... Load Trap -> Ram : Please Wait... Load Trap : LEN Ok Init Trap : Please Wait... Trap_Wptr 80000534 Trap_Iptr 80000140 Start Trap : Please Wait... Load EMI : Please Wait... Init OK --------------------- Init JTAG DCU OK Trap_Wptr : 80000534 Erase ADR[7FE00000] : Please Wait... Erase success !!! --------------------- Init JTAG DCU OK Trap_Wptr : 80000534 Write Flash ADR[7FE00000] LEN[00200000] : Please Wait... Write Flash END 7FFFF000 The box just stays on standby, wont turn on! i even plugged it out and back in again. I've no idea what to do next. Can anybody help Thanks
Hi Sc0user I checked the C14 capacitor, no signs of leakage and the top does not look blown or dis-coloured. The box is probably beyond repair, what do you think Thanks
The jtag was successful. I would still replace the C14, it doesn't have to show any sign of damage to be the culprit.
Sc0user I changed the C14 Capacitor, the old capacitor was 25v 470uf. I replaced it with 16v 1000uf capacitor which came with the j-tag. No joy still the same red light after I powered on J tagged again, Continuity check on fuse/lead Power is definitely going to PSU. anything else come to mind? thanks
Sc0user I changed the third capacitor from the right top pic, marked C14! As you can see from bottom pic, i cant solder for sh*T. Maybe thats causing the problem, or i've done completely the wrong thing all together. Thanks
