euro-vox max 2007

hi all new to this i have a prob, with 2007 keeps saying no signal it was working fine up to last week,i live in dublin is there anyway of fixing the prob any help welcome thank you

 

do a power scan, they should come back then!

 

hi i tryed that with no joy only getting level 78% and quality 87%

 

sorry then can't help ya, only have a limited knowledge of them myself so you'll have to try get someone elses help

 

http://forums.afterdawn.com/thread_view.cfm/13/468229 you'll get all the help you need in here

 

Or go into menu,instalation power scan mode normal start 290mhz stop 870 symbol rate 6.887 if in dublin if that dosnt work try 6.952 go to step 8 press ok and wait this should sort you out.

 

any help all boxes gone off in north east just says updaiting

 

Hi I've got a euro-vox max 2007 and in Donegal with a cho*** line. I have tried 290 400mhz with both symbol rates 6887 6952 and 6875 but I am not getting any channel numbers. When doing a scan the quality and signal is sometimes 98%. Can anyone let me know if the euro-vox max 2007 work in Donegal and if so how can I get it working. i have downloaded and installed the updated firmware.

Thanks

 

Are you on Ch**** MMDS, (Aerial on the top of your house with a cable feed to your TV), or do you have a direct cable from the road.

 

Hi no aerial so I believe it's direct

 

OK.Freqencies for Ch****
274.000 371.000
282.000 378.000
290.000 386.000
298.000 394.000
306.000 410.000
314.000 426.000
322.000


To add these frequencies you need to:

1.Press menu,go to installation,press user installation, it will ask for a password, type 1004.
2.Press green button for ch edit
3.Press red button add channel
4.Enter frequency and symbol rate 6875
5.Press ok, then repeat these steps till all frequencies are added. when they're all in press exit and go back to first page of install menu.
6.Press the red button for auto scan. This will do a scan an all the freqencies entered and should hopefully give you all channels.