euro-vox max not working

Discussion in 'Digital TV - UK & Europe' started by fsollof, Jan 27, 2009.

  1. fsollof

    fsollof Member

    Joined:
    Jan 27, 2009
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Hi guys i have a euro-vox max box and it has been working fine for years , all i do now and then is up date the codes.But now even putting the latest codes in i still have no channels, i have done full search and it finds the channels but when i go on them still nothing comes up, even the free ones eg: bbc/itv etc do not work.My area is telewest and i live in the loughton essex area please has anybody got any idea what could be wrong

    cheers fsollof
     
  2. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Update your box with This guide then theres no need for the codes.
     
  3. fsollof

    fsollof Member

    Joined:
    Jan 27, 2009
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Hi mate how do i know which update/software to download.My box is euro-vox max and is a grey colour i have had it for a few years now.
     
  4. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Info is in the guide I linked you to,


    1, Press menu, config, system info, type back what's in there, ALSO,

    2, Is this your box

    [​IMG]

    3, To tell read below.
    [​IMG]
     
  5. fsollof

    fsollof Member

    Joined:
    Jan 27, 2009
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Hi mate need some advice please,i have just bought the required leads including a usb adaptor, i have put the drivers on my pc and it reconises the lead when i plug it in.i have been through the guide as it says connected box to pc then power up box 4 digitd come up meaning it has been flashed before as its says in guide.I run the software for my box it is blue type as it has 12 slots in grill when i press down load it does not reconise the box,what am i doing wrong....

    fil
     
  6. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    thanx hitech for info on eurovox. still having probs. whem i click on download nothing happens, then no com ports available comes up. plz help. thanx
     
  7. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Last edited: Feb 7, 2009
  8. fsollof

    fsollof Member

    Joined:
    Jan 27, 2009
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Thanks guys all working now I bought another lead and it worked ok.last question, I have downloaded the new firmware and entered new codes will it auto update the codes in the future or do I still have to enter new codes each time they are changed.
     
  9. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    If you downloaded the correct firmware to your box then you don't need to enter codes at all.
     
  10. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    this eurovox is drving me mad. the few channels i had are gone now and it says searcing for signal. when using firmware nothing happening when hit download. sometimes it says waiting on response of receiver other times no com port available. sorry if doin ur head, im a eurovox virgin. very grateful for any help.
     
  11. fsollof

    fsollof Member

    Joined:
    Jan 27, 2009
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Hi m8 i had much the same problem , what i had to do was go to device manager,go to ports where you will see the lead connection,then click on it go to advanced and lok what port it is connected to .Mine was connected to coms 8 but that was not reconized by the firmware so i changed it to coms 4 and it picked it up and i was able to download firmware.Hope this helps m8 good luck.
     
  12. qazsam

    qazsam Member

    Joined:
    Apr 16, 2008
    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    16
    Problems with your PC/Laptop not recognising your eurovox.

    To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

    1. Go to the Start Menu
    2. Right click on "My Computer"
    3. Select "Properties"
    4. Click on the "Hardware" tab
    5. Click on "Device Manager"
    6. Click the + sign next to "Ports (COM & LPT)"
    7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
    8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
    9. You should be able to transfer data once the correct port is selected

    If you need drivers go here

    http://www.gilsson.com/usb_drivers_download.htm

    Follow my advice to step 7. Locate your USB Adapter (port *)

    Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
    Save the selections inc/laptop
     
  13. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanks a mill for ur help lads. Ive switched both to com3 and still the same craic. So its either as my name suggests i an completly useless or something wrong with my box. Think im going to give up.
     
  14. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Are you using a Null Modem Cable, are you also using a USB adapter?, are you on XP or Vista....
     
  15. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    im using serial to usb with a gender changer
     
  16. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    XP or Vista????
     
  17. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    sorry m8, im on vista.
     
  18. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    No problem, As you have already tried configuring ports/coms you need to get to a PC with a 9 pin serial socket so that you only have to use a Null Modem Cable plugged straight through to the back of the PC.

    [​IMG]

    There are hundreds of posts about this problem with USB adapters and vista, once you do the above you should be fine, thats providing that cable you have is a null modem cable.
     
    Last edited: Feb 9, 2009
  19. useless79

    useless79 Member

    Joined:
    Jan 31, 2009
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    will try that m8. thanks again for help. if people in every day life where as helpfull as people on here life would be much easier.
     
  20. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Your welcome mate and good luck with it. Let us know how you get on.
     

Share This Page