eurovox 1000sl Help

Can someone please advise,i am new and a complete novice. I have a Eurovox 1000sl, have flashed it with Version 1.0ST4 Aug22 2008 off this Site This was working great when i first connected it up Saturday . The box was saying the same fault on Sunday so i flashed it again last night and again was working great until just got home and all i am getting on every channel is a blue box flashing in and out with saying NO / BAD SIGNAL . I have tryed unplugging the box and tryed the cable connections,and found no faults . the normal box and broadband connection is working fine, Am i doing someething wrong or have not switched something on. Do i have to flash the box every day

 

Is your cable feed pluged in the RF socket at the back and not the ANT?

Can you check your subbed box to see if thats working on your feed, it maybe a cable issue, Where abouts are you.

 

Not familiar with this box at all... however you shouldnt have to flash it everyday... have a look here for some Q&A on this box!!!

http://forums.afterdawn.com/search/...+1000sl+&ie=ISO-8859-1&oe=ISO-8859-1&sa=#1546

 

Too Slow! LOL.

 

Thanks for your comments, i have checked the cable and it is in the RF socket, i am over in Salford , i have had the box working great on 2 occasions , i forgot to mention , i have also tryed taking out the splitter which feeds the broadband has i have read this on previous forum notes,although when it was working last night the brodaband was being used.

 

Have you checked the subbed box (your original cable box) to rule out cable problems.

 

The cable box is working great, i have split the feed and have got a cable going to the subbed box and the other going to the Eurovox, i have got them connected to the back of the tele on 2 seperate scart leads, when i switch channels the normal box is working great.

 

Take the splitter out completely and connect your feed directly to your box and see if you channels come back, if not try a factory default and then powerscan.

 

Hi all , still having trouble and have tryed all suggestions, have carried out a powerscan and have found 39 frequency however it is staying on this screen, i have tryed updating the channels by auto update and highlighting the 39 frequncys and manual scan but still cannot get channels, when i press menu and come out of the screen , just get a pop up box stating no channels, will i need to flash the box , the last two times i have got the box working after flashing , when i have done a factory reset and powerscan the process has been automatic and located the relevant channels,

 

Staying on what screen, does it say No signal or scrambled.

If it's saying no signal then check your signal strength by pressing info twice and tell us what it is.

If it's saying scrambled try menu, OK on language settings, type 1968 another column will appear saying emulation, set it to "enable" then save and exit back to TV mode.

Also do any of the channels work at all, if yes compare the working channels signal to the non working channels.

 

Hi all , now working , disconnected everything and went back to the beginning, done a factory reset and a power scan, when i got a list of frequencys up, press "update channels" and got all channels back, Thanks for all the help and lets see if working this evening when i get it ?