Hi All having problems with my eurovox 2008 (black) i can only get the FTA channels, when i go to the other channels it says " please insert a smart card" my current version is dvb-xc box tda 1.0 stc4 jun 20 2007 2.0t v001 i tried installing UFL_MaxV_Kuro3_18_04_08 but when it goes to the end it says "downloading is failed"
What operating system are you using? where did you get your cable and is it a Null modem cable or a RS232? are you using a USB adaptor?.
Thank you for the reply. What operating system are you using? Windows XP where did you get your cable and is it a Null modem cable or a RS232? Tha cable come with the box i think its a null modem cable, its this one anyway http://www.mycablebox.co.uk/images/NULL MODEM CABLE.jpg are you using a USB adaptor?. No
1. Go to the Start Menu 2. Right click on "My Computer" 3. Select "Properties" 4. Click on the "Hardware" tab 5. Click on "Device Manager" 6. Click the + sign next to "Ports (COM & LPT)" 7. One of the listed ports marked "serial" should be set on either COM1, COM2, COM 3 or COM 4, 8. You should be able to transfer data once the correct port is selected To assign to the correct com/port, Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected change that to 1,2 or 3. Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished. Save the selections in the usual way. I'm on may way out so wont reply for a while but if you get this right it should work fine.
I followed the instructions and tried all 4 ports, before com port 3 said it was in use but when i tried all ports(1-4) following the same instructions, i went to press download on the firmware updater and it and now it asks what port i want to use and when i select 1,2 or 4 it says "COM port not available" so it leaves me with just com port3 and then it just says "waiting for the response of your reciever"
This is a new box, i have read else where if its a new box, it will need flashing, how do you do that? thank you
Thats what Hiteck was explaining to you earlier, thats called flashing, you obvoiously are doing something not quite right,if you look in later either Hiteck or Karl (the eurovoxx Kings) will give you further assistance..
I went to restore to factory settings and seems that even though it says "downloading is failed" it actually did download it and it all works, thank you for your help
