eurovox broke

i got a eurovox 2006, when I switch it on it stays on standby and two dot appear does anyone know how to repair it
i tried: to you open the box and hold button then open dnupman 2006 download select boot mode but notting happen could someone please tell me what to do

 

first check here to check whether its a clone or not then post back the answer http://www.irelandeurovox.com/eurovoxclones.htm

 

its eurovox blue 2006 and yes it a orginal box

 

read this thread you may need to jtag your box http://forums.afterdawn.com/thread_view.cfm/554719

 

before i do this i want to try the dnupman way again because i didnt do this before propely could you send me the dnupman to use

 

In here in the eurovox software folder http://www.4shared.com/dir/3042613/f6e3421c/sharing.html

 

ok how do you jtag eurovox

 

have a look in here
http://www.freewebs.com/jtagg/

 

ok i bought a JTAG
i downloaded JKEYS and opened developmet pannel loaded unlock file
when i erase it keeps saying error

 

Try SkyMax it all depends on your chipset. Have a read on the forum as I am off for the evening just use the search bar I have posted a lot of info on your problem. And other members have added to them.

 

i got skymax and keeps saying parral port could not be opened
what shall i do?

 

i got a intel chip

 

think you'll have to wait for sc0ucer or fergus sorry

 

Told you to have a look around as there is lots of info on your problem. You need to make sure your port is set to ECP with an IRQ of 378.

 

Please tell me how to set port to ECP with an IRQ of 378.
Am still searching but i cant find anything

 

I jtagged it opened JKEYS erase box and it erased sucssfully and write TSOP file sucssfully but the still shows two green light and stays on standby

if i open dnupman it says dected v1.00

so i flashed but still green lights and on standby
What shall I do?????

 

Hellow i am living in nrt,dublin and have a eurovox 2008 that is stuck on message,reading through the threads i think it may need to be jtagged.Could somebody do this for me, will pay.Thanks.

 

have you unplugged the box and pluged it back in after a few minutes?have you updated the firmware recently and not done a factory reset?if the box has life in it, it may just need to be reflashed.

 

When i try to flash it ,it says waiting on recever.

 

i think you are using the wrong cables then,is it a null modem on its own or a null modem in conjunction with a usb to serial adapter?