Having a few issues here... got the box yesterday, plugged in the hard drive, flashed the firmware with the latest release UFL_ex5000_15-07-08 I connected it up, ran a scan and it couldn't find any transponders so I reset it to factory settings, just re-flashed it and loaded the channel list from post 321 in the 'CDF Files for the Eurovox' thread over on techwatch but when I go to edit the list, it's not populated at all... Any ideas what's happening? Is the box f*cked? imagechicken.com/uploads/1228836780097289000.gif
Now I have edited your link I can see your from dublin. MAKE SURE YOUR FEED IS PLUGGED INTO YOUR RF IN AND NOT THE ANT SOCKET AT THE BACK OF YOUR BOX. Do a Factory Default by pressing ,(Menu) pull right to (Config) pull down then (OK) on (Clear Data) enter 0000 for your pin then highlight (factory default) and press-(OK) then (OK) on your symbol rate. Now that you have completed the Factory default you can scan for your channels, go back to the (Menu) screen then (installation) and (OK) on (User Installation) again enter 0000 as your pin, Now press the yellow button for (Power Scan) In that box for use these settings. Start at 290.000 end 420.000 Symbol rate 6887. Symbol rate 0.000 Symbol rate 0.000 Step 8 Fav ON/OFF < up to you. Then press ok to scan.
