eurovox ex5000 pvr

Hi i wonder if you can help ive got a eurovox ex5000 pvr and has been working fine since this morning apart from a few channels the rest are all scrambled ive done a reset and flashed the box but they are stil scrambled could you please help.

my system info is

model DVB-XC EX5000 TDA
S/W VER - 1.0 ST4 JUL 15 2008
H/W VER - 2.0T K5 +D
BOOTSTRAP - VOO1
S/W BUILD - Kuro

Many Thanks
Sharon

 

Virmin Media TV sevices went off this morning throughout the UK, they have all been coming back on slowly today, where abouts are you? also have you tried plugging in your contract/sub box to see if thats working?

 

thanx for your reply im from the south west i havent got another box just broadband but a friend of mine has the same box and his is working fine.

Do you think its because i flashed the box or did a power scan about 12pm

 

Could you narrow down your location a bit for me please nearest town maybe?

 

lol sorry about that im new to this hehe town is plymouth

 

do a Factory Default by pressing ,(Menu) pull right to (Config) pull down then (OK) on (Clear Data) enter 0000 for your pin then highlight (factory default) and press-(OK) then (OK) on your symbol rate.
Now that you have completed the Factory default you can scan for your channels, go back to the (Menu) screen then (installation) and (OK) on (User Installation) again enter 0000 as your pin, Now press the yellow button for (Power Scan) then a box will load,

Start at 100.000MHz
Stop at 800.000MHz
Sym Rate 6952
Sym rate 0000
Sym rate 0000
Step 8

then ok to scan.

 

ok i will try that again and will let you know thank you for your help its very kind of you

 

Your very welcome, good luck with it any problems come back

 

still getting scambled channel on all channels apart from normal ones

 

sounds like your area is still down, is your friend close to you with the working box?

 

hes about 10 min drive away but he has been at work all day so didnt know about anything but ive been home and reset the box and flashed it. I just hope it will start working soon else my daughter wont be happy as she wont be able to watch nick jr lol

 

One last suggestion otherwise its down to your provider try emulation,

Press menu ok on language settings, type 1968 then emulation will show, make sure this is set to enable then save and exit (the blue button), if that does'nt work just wait for your services to come back on.

 

nothing happens when i do that 1968 i just hope it works 2moz morning thank you for your help

 

Make sure you have pressed OK on the language settings, aim your remote right at your box then type 1968, it will work, if its already on just try the channels later, they should come back on, best of luck

 

eurovox is still scrambled :-(

 

Have you tried to contact your provider to see if there is any problems in your area, if you cant contact them ask a neighbour to see if their sevices are still working, you have the correct firmware and you are picking up all your channels so its either down to a provider fault or your emulation is turned off, if you follow the instructions above correctly when you press 1968 in language settings emulation will show.

 

hiya i think i was having a bad day as when i was pressing 1968 i was thinking another page would open but now seen emulation toolbar LOL and it was turned off. all back and working now thank you very much for you help.And my daughter is now very happy she can watch her nick jr

 

Further to this i'm also from this area and a few of my channels are now showing as scrambled.
How do i update just a few channels ?

 

NeedMeTV read back through this thread and you will find the help you need,

Shaz, glad you got sorted out especially when the kids are on your back, I know how that feels