flashed my eurovox last night with the latest software, all was well. Turned it on this morning to see if it was still working, it came on, but when i tried to change the channel over the remote didnt respond. Checked the batteries, but still would not respond. So turned the box off and when it came back on all i get are the numbers 0001 on the lcd display, and a black screen on the tv. I have tried re-flashing it with the new software with no luck. Is the box a gonna or is there still hope??? any ideas would be much appreciated.
the same thing happened to me I done 2 boxes and they were working fine and now the exact same thing has happened to them aswell. I think we need the blue clone software for the UK but its not on yet but I live in hope.
yes lads sc0ucer warned last night to check and see if you all had blue clones,have a look in here if they arte clones try and reflash with the clone firmware in eamos library.
Do you both have clone eurovox's, if yes then you have used the wrong firmware, When scouser put the post up that the blue firmware was out he did say dont use this firmware for a clone blue eurovox. If you both have a clone blue then try flashing with the old clone blue box fix in emaos but it likley that you both need you box jtagged. LOL Karl beat me again hope your well mate.
you could be right, but on the last firmware update i didnt use the clone software, but it could be problem for all blue boxes then! not good.
tried to download this software from 2 different places, downloads ok, go into rar. file and shows the file, but its a bin. file rather than a exe. file which does nothing. what i am doing wrong?
You need the loader dnupman or voxer from the software folder of eamos library. Run the loader then add the bin file.
no ive have downloaded EVMAX_BLUE_160408_CORE_140207 from easmos and again from bigmaq both same file, same thing happens? i have also downloaded the file you said but obviously that wasnt the right file, but downloaded it just in case.
you need to download dnupman,save the firmware to your desktop (160408_core_140207)then run dnupman click browse find the firmware file and click download,and what file have i said to download that wasn't right?also are you sure you have a clone,have you checked?
unfortunatly not, flashed with new software no probs but still have same problem, blank, black screen, no response with the box, either through the remote or the box its self, looks pretty goosed to me!!
as far as i know there is only one blue eurovox clone software out there,16/04/08 there is no new update.
