Eurovox Max V 2008 Help

Just a Question for the Gurus on here
1.Need to know the step by step guide on how to setup the Eurovox Max V 2008 out the box its had nothing done to it.

Thankyou

 

Does the Eurovox Max V 2008 need to be flashed first before u can use it? and is this the file u need UFL_Max_V_KURO_15_10_07.exe???

 

You can update to the latest firmware

Have a look here
http://forums.afterdawn.com/thread_view.cfm/582883

 

Im a bit confused here so UFL_Max_V_KURO_15_10_07.exe is just the flash utility not the flash file?

 

The software/firmware is build in and thats all you need

 

Thanks alot celtic71 for the help so once the flash has been done its just a case of scanning for channels?

 

Save you channel list on to your PC then, Just Flash Box , wait till it reboots and then Drop your saved channel cdf file back in the box .

 

Its a brand new eurovox max v 2008 so never been flashed and never had a scan for channels so do you still need to save the channel list??
Thanks

 

If its brand new then flash and search for channels etc

You only need to save your channel list so you dont lose the order of preference and fav's

 

Thanks alot Celtic71 so you must flash before you can use brand new EuroVox Max V 2008 otherwise they wont scan right?

 

Yep

 

Thanks for confirming Scouser lol

Just here for a nosey and I be back in an hour

 

No probs cya in a bit

 

Thanks alot Celtic and Scouser

 

No problem , your welcome

 

Hello Celtic and Sc0user i flashed the eurovox max v 2008 with UFL_EUROVOX_MaxV_Kuro_BETA2.exe at first i thought the box was duff because it would get to the point where it says version 2.10 detected click start and all it was constantly coming up with was factory reset something like that and was doing nothing after multiple attempts what that guide 001_How_to_flash_the_Eurovox_Max_V_2008 doesnt say and what i had to do was unplug the eurovox on that screen and plug back in again as soon as i did that it started downloading the flash to the box maybe a point to be added to the guide for others with my problem

 

Hello again just another bit of help needed i pressed menu then installation put code 0000 in then went to power scan using these setting mode= normal start= 300.mhz stop= 870.mhz symbolrate1=6.952 symbolrate2=6.887 symbolrate3= 0.000 symbolrate4=0.000 step= 8 then did a powerscan im with V****N Have i done this right or is there anything else that needs doing to get everything scanned area is NW England.
Thankyou

 

Anyone about that can help with this ??

Cheers

 

u only enter one symbolrate!!not sure which one u need coz ur in england.

 

Yeah could do with some more detailed info on the best setting for a power scan in the area you live.
Cheers