eurovox max v black

Hello everybody i have eurovox box got it few months back load critical update was working fine got all chanels until one day ntl
was down for a few hours when it comes back i lost all chanels
tried power scan manual sacn for each frequency no chanels signal is 90% also quality 90% then i brought box to my mate house done scan all chanels are there seems nothing wrong with box
also i have ntl box working fine
ANY HELP WOULD BE GREAT THANKS

 

Make sure your cable is plugged into the RF Socket and not the antenna port

OK you need to go to menu, config, clear data and then clear channel data. Then do a normal powerscan from 290.000 to 403.000 using symbol rate 6.887 N*L

 

Ok mate i done power scan too many times no use also i reflash box it didnt get me chanels back it seeems my box is not updating itself
what i done is get latest ntl codes enter them manualy done scan it worked but my mate had same problem i done same thing for his box all channels are there in my house when he bring his box home there is no chanels i wonder is there different codes by area
by the the way i live d15
these are keys i used


00 = D7 F2 17 3F 6F 9A 2E DC
01 = 54 29 C9 FA 88 86 6B BB

 

Those codes are out of date,to get the new ones click the link at the end of this post marked CODES.

 

press menu-preferences-language settings-ok-key in 1968-go down to emulation and make sure its set to enable.

 

Think his codes being wrong is his problem Karl, well it's one of them anyway unless there's somethin else up.

 

I no co but there should be no need to update codes on the eurovox

 

Ah right thought it worked similarly enough to the SV.

 

nah even the older versions update themselves pity about the black great box unfortunately to dodgy now.

 

Sorry people i copied wrong codes actualy these are codes that worked for me 00-88 C1 70 A9 59 17 11 FF 01-08 B4 97 5B E2 D9 41 0B
I got them from the site that you recomend these are the latest codes -I couldnt get chanels until i enter these codes -i done power scan many times it didnt help now i have channels on both boxes in my house but either of them not working my mates house.When i do power scan i got few blank chanels no name it says tv ch -These boxes should update themselfs they did for a while when we got them we had chanels they worked fine then i lost chanels and my mate after few days.It s very hard for me to guess what actualy problem is i didnt see any post with similar issues.Could it be ntl done something or its me.Just to mention that i have experience with loading software and entering keys as i have done it for satellite
boxes for a while.Any more ideas welcome??????Thanks a lot

 

i think i no whats wrong press menu config system info and tell me what it says ,the first critical update i think you needed to manually input the transponders

 

it says Model DVB-XC Box V TDA
S/W Ver 1.0 STC4 Jun 28 2007
H/W Ver 2.0t K5
Bootstrap v001

 

ok give this a try and see if it works for you first do lookin here and see if you have a genuine or a clone http://www.freewebs.com/dooby2oon/
http://eko.4shared.com/account/file/28380732/56b8d66a/UFL_EUROVOX_MaxV_Kuro_BETA2.html

 

OK new to this
My Eurovox MaxV 2008 went at around 1600 today
My 8 month old is on a rant without disney andNickJr

How do I update these codes...
Do I need the Null Modem Cable or can it be done over the menu:

Thanks
Daddy with Earplugs

 

press menu then press the yellow button(text)provider id 54-01
then key in the codes using the guide save and exit,all codes found in here http://forums.afterdawn.com/thread_view.cfm/531363

 

ok got it, put provider to 5A 01 and it worked

thanks