Eurovox Max V issue Dublin N*L

Running the March firmware and am unable to get any channels on my Eurovox. Has been working fine for months now.
Tried a factory reset and a re-scan following all instructions. I get a listing of about 120 channels and even after leaving it on SLy SPorts for a couple of hour I get a "no Signal" message. Any ideas or is anyone else experiencing an issue? Dublin 18 based

 

You should have almost 140 channels. Try updating to the latest firmware, follow HiTeck's Guide

 

Thanks Sc0user,
I'm on Kuro3_18_04_08 and have been running this for months with no problems. I think there might be some work going on in the Dublin 18 area (from reading an issue raised by Leopard16: http://forums.afterdawn.com/thread_view.cfm/315/506556)
All I think I can do is sit it out and hopefully the issue will resolve itself?

 

Yes there is work in your area alright, but do this. Press menu, then type 1968 on your remote, (check emulation is on), now press the default key. Exit all the way out and put it on living channel and see if it updates.

 

Sc0user,
tried what you suggested (didn't know how to check emulation is on/off) I have left it on living tv and will check it a bit later.

Appreciate your help, Cheers!

 

press menu preferences-language settings ok then 1968 for emu.

 

No luck at all with this...I think N*L have been up to something..even my subbed box is dropping every so often. Not picking up any channels at all on the Eurovox..anyone else in South Dublin (18/16 etc) experiencing problems?

 

as sc0ucer said there is work going on in your area so its just a wait and see at the moment,ring them if your subbed box is acting up.

 

Solved this by turning EMU off then doing a fresh powerscan. About 100 channels picked up using 6.887 290-420 scan range.
Eurovox then looked for smart card to be inserted so I turned on EMU and switched to SLY sp0rts..hey presto channels back working.

Thanks for all the help

Dec