Hi Certain channels which seem to be of the same frequency are displaying 'No Signal' on a blank screen. I don't really want to do a Power Scan as all the other channels seem ok and it can be a ball ache getting most of them back as I have experienced in the past. I don't really have a clue how to use the Manual Scan function, will this sort the problem out ?? some channels that are not working are saying the singal is 8%. Cheers for your help.
Not to sure exactly what you mean when you say some are showing no signal - are these NAMED channels or what, if they are and there is quite a few then you will have to do a Factory Default and Powerscan on your correct frequency, but if they are nondescript TV numbered, then this is normal. To do a Manual Scan on a particular frequency, press Menu and go across to Installation then User Installation OK and enter 0000 use up down arrow keys to highlight the frequency you want to Manually Scan and press OK, a tick will appear in the left hand side of chosen frequency press BLUE button to scan that frequency 2 mins max and it will show you what was found on that frequency and return it's self to the TV, job done. As regards the 8% signal, there is firmware for that particular problem, but I do not think you need it unless it is on a lot of channels and is causing you problems.
