please help i av tried all codes for telewest which is now virgin media and still it says code being updated as anyone got correct codes for west midlands area thanks
Yeah i have the same problem, i've tried loads of codes and none of them seem to work. i'm from leicestershire area which is virgin media.
No didn't work you missed a digit off the last number. can't seem to get any codes that work. do you need to re-scan after you put new codes in???
NTHELL - [11/04/2008] KEY 00 = 8A 6B 42 56 D5 E3 83 1E KEY 01 = DB 7E 88 CA 37 E3 93 83 Method 1: 1. Press Menu, then yellow button, enter provider ID. 2. Provider IDs are 54 01 for N**, 5A 01 for Te*ew***, 5C 01 for C**, 5E 01 for Ch**us. 3. Enter 00 line first and then 01 line. Press OK and exit to view. Note the on screen guide at the bottom of page for letter entry, numerical entry use remote numbers as normal. Method 2 (May be required for older models): 1) Press MENU on the remote control. (2) Highlight Language Settings & press OK. (3) Press 1968 on the remote control. (4) Ensure that the Emulation is ENABLED. (5) Press 1968 on the remote control. A PAGE WILL BE DISPLAYED CONTAINING KEYS! (6) Press the RIGHT ARROW on the remote control until NAGRAVISION is displayed in the heading. YOUR PROVIDER WILL HAVE 2 ENTRIES AT THE TOP OF THE LIST! KEY 00 & KEY 01! (7) Highlight the first ENTRY KEY 00 & press Ok. ( Press the DOWN ARROW on the remote control until KEY DATA Is selected. THE KEY FOR 00 SHOULD BE XX XX XX XX etc (9) Change the KEY DATA CODES using the RIGHT ARROW on the remote control. PRESS "OK" ON THE REMOTE CONTROL AFTER CHANGING EACH VALUE! ONCE THE KEY DATA CODE HAS BEEN CHANGED TO XX XX XX XX etc PRESS THE BLUE PAUSE BUTTON ON THE REMOTE CONTROL TO SAVE & EXIT! (10) SCROLL DOWN TO SECOND LINE FOR YOUR PROVIDER & CARRY OUT THE SAME PROCEDURE ABOVE. (11) PRESS BLUE BUTTON TO SAVE & EXIT. THEN EXIT OUT OF MENU TO VIEW CHANNELS.
