Eurovox Max

Discussion in 'Digital TV - UK & Europe' started by Cyborg1, Aug 22, 2008.

  1. Cyborg1

    Cyborg1 Member

    Joined:
    Aug 22, 2008
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Can Any one help i have had the box for about 4 months and about 3 weeks ago i have lost all channels except BBC 1 2 3 4 itv channel 4 and all the uk channels i have power scanned numerous times but still no luck the settings are mode = normal ,start = 300 stop = 870, symbol rate = 6.952 symbol rate = 6.887 step = 8 Can any one advise me on what to do Many Thanks ............
     
  2. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Where abouts are you and who is your provider ie TW N*L C+W previous to Vermin Med.

    Also Menu Config system info, read back to us whats in there.
     
  3. Cyborg1

    Cyborg1 Member

    Joined:
    Aug 22, 2008
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for your quick response i am in the Hertfordshire Area and supplier is Vermin Med The Menu config is TV Mode = Multi, TV Aspect Ratio = 4:3,Video Output = RGB,Screen Mode = Letter Box, SPDIF output = on, UHF Mode = Pal B/G, UHF Channel = 40,Signal Booster = off ....Many Thanks.
     
  4. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    You went into TV settings try again please,

    Menu pull >> to Config then pull down to highlight System Information the press ok.
     
  5. Cyborg1

    Cyborg1 Member

    Joined:
    Aug 22, 2008
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Lets try again i hope i have now the correct info . Model = DVB-XC Box V TDA, S/W Ver = 1.0 STC4 Apr 11 2008, HW VER = 2.0t K5,Bootstrap = V001,S/W Build = Kuro.
    Many Thanks ...........
     
  6. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Hertfordshire Area is near Luton isn't it? so your symbol rate should be 6887.

    Menu> Config> Then ok on Clear data,
    Type 0000 or 1004,
    Ok on Erase all channels then ok again.

    wait for it to clear all channel data then,

    Press Menu along to instalation, Press ok type 0000.

    Now press powerscan "the Yellow button",

    a box will then load like this

    Start --------100
    Stop --------700
    Symbol rate---6887
    symbol rate---0000
    symbol rate---0000
    Step ---------8

    You were starting yours at 300 try starting from 100 upto 700.

    If after doing this you do not get any channels try with the symbol rate to 6952
    May take a while to scan,

    best of luck.
     
  7. Cyborg1

    Cyborg1 Member

    Joined:
    Aug 22, 2008
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Many thanks for your help but i have tried all evening But with no joy my best settings are
    Start --------100
    Stop --------700&870
    Symbol rate---6952
    symbol rate---0000
    symbol rate---0000
    Step ---------8
    Fav Sort------on
    i get all the channels listed they all seem to load but quite simply they do not come up on the screen i just get all the normal channels bbc 1,2,3,4 itv1,2,3, ch4,5 and all the uk channels any more suggestions.
    Many Thanks .........

     
  8. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    Try this, Menu Config, Clear channnel data 0000

    then,

    try pluging your box straight into the feed coming into your house canceling out any splitters you have in the loop, then try a powerscan using the 6952 as the symbol rate.
     
    Last edited: Aug 23, 2008
  9. Cyborg1

    Cyborg1 Member

    Joined:
    Aug 22, 2008
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Well what can i say i have been pluging the coax straight into box with no sucsess but when i received your last mail i went into config and erased all channels via the splitter Then i went into installation mode with the cable straight into box and Guess what it works so god knows what i have done but i seem to have more channels than i have ever had before all is rosy at present Many Many thanks for all your help........ Cyborg1
     
  10. HiTeck

    HiTeck Regular member

    Joined:
    Apr 12, 2008
    Messages:
    3,003
    Likes Received:
    0
    Trophy Points:
    46
    You will have alot more channels as your were starting your search before from 300, between 100+300 theres 12TPs that contain around 40-60 channels.

    Glad your sorted and all the best!.
     

Share This Page