Please help, I'm trying to get someones Eurovox TX to work after flashing, it is finding 120 channels but only showing picture on rte1. in chrs mmds area. When trying to view any of the other channels it says "code being updated" but does noting. I have reset factory settings and rebooted.....HELP PLEASE
if you have flashed using the correct software,make sure your emu is switched on.to do this press menu then yellow button then scroll down to emu and switch on or menu and when on language type in 1968 twice and then scroll down and switch on emu.if all else fails you can manualy input codes by hand.first you need codes which i cant give you as these are the rules for this site,but you can download either bigmaq or wizardmods toolbars to your pc this is free,but you may need to register with the sites this is free also. when you download the toolbar and install it you will see keys on the toolbar, that is where you find codes.then press menu on your eurovox then yellow.you should see provider id,then key oo,then key 01.provider id for chorus cork is 5e01.the codes are in the toolbar.remember tho there are to banks of codes 00:followed by code,and 01:followed by code you will need both banks of code,then ensure to save,look on screen for help on inputing codes and saving when your in the code menu.goodluck.
