Hi all.... I'm in dire need of help! I tried to flash the eurovox as I learned from this forum and lost all my channels (NTL Dublin). I have a feeling I may have used the wrong cable from PC to Digibox (I used a cable sent with the Eurovox). I can't get any channels now. has anyone any Idea how to fix this problem. Thanks in advance for your help, Dave
Press the Menu button on your remote, and then go into 'Config' menu and select 'Clear Data' It will then ask for your PIN (default is 0000) Then select 'Factory Default' It will then ask you to select the symbol rate (6.887 NThell Dublin) Press OK when 'Reset to Factory Default Settings' comes up It will then say 'Wait to Factory Settings' and will then start to do a Full Power Scan (using the Symbol rate you selected earlier) It will then search through for channels, , do not interrupt it until it finishes. It wil then exit to allow you to view your programs, but the code being updated message will probably come up for a while, Put the box onto Sky Sports . It may only take a few mins but again do not interrupt it (even if you think it is not working!) Sky Sports will come up and all your channels will be back and you won't have to manually enter your codes anymore.
