Hi guys, I was hoping one of the members could help me with these errors while attempting to burn with Maxell DVD+RW errors i keep getting. I consider myself an apt user who can usually solve this of my own accord, but for the life of me I can't solve this. I seem to get about a 60% strike rate at burning movies on to dvd+R, I am able to burn an unbranded DVD+RW with movies or data about 75% of the time. cds are my only constisent in these troubling times. Im assuming all you need is my nero burning log error. If its any help, I sometimes get a burn succesful message from nero, only to discover that the dvd is still blank on re-insert. Other times it burns ok, only to fail on the data verification. Ive checked for firmware updates, (not needed) automatically installed apharently?) ASPI OK. Reads purley randomly just as well as it burns? Sometimes reads fine, other times not at all...........?......?..........? Any advice or suggestions would be heart-felt apreciated, respect. Thank you. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/04/2005 09:51:06 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 Nero version: 6.3.0.2 (Nero Express) Recorder: <QSI DVDRW SDW-041> Version: DX43 - HA 2 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <QSI DVDRW SDW-041 >Version: DX43 - HA 2 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 2 === Scsi-Device-Map === DiskPeripheral : IC25N040ATMR04-0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : QSI DVDRW SDW-041 atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === QSI DVDRW SDW-041 D: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 222MB (227824kB) Free physical memory: 72MB (74548kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.6.2005 ISO compilation 12:32:17 #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:32:17 #2 Text 0 File Reader.cpp, Line 118 Reader running 12:32:17 #3 Text 0 File Writer.cpp, Line 124 Writer QSI DVDRW SDW-041 running 12:32:17 #4 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 12:32:18 #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 12:32:18 #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 51439 ( 11:25.64, 100MB) 12:32:18 #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 12:32:18 #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: QSI DVDRW SDW-041, Media type: DVD+RW 12:32:18 #9 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:32:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 51440 (51440) = #51440/11:25.65 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51440 blocks [QSI DVDRW SDW-041 ] -------------------------------------------------------------- 12:32:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [QSI DVDRW SDW-041 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 105349120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 51440 | lead-out | 1 | 0x00 | 0x41 12:32:18 #12 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 2.4x (3,312 KB/s) 12:32:19 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:32:19 #14 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02EC5000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 12:32:19 #15 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 1:24,043 (84043ms) -> OK 12:32:19 #16 Phase 98 File dlgbrnst.cpp, Line 1800 Start formatting disc before burning 12:33:03 #17 Phase 100 File dlgbrnst.cpp, Line 1800 Formatting disc was successful 12:33:03 #18 Phase 65 File dlgbrnst.cpp, Line 1800 Burn process started 12:33:03 #19 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: No 12:33:41 #20 Text 0 File WriterStatus.cpp, Line 115 <QSI DVDRW SDW-041 > start writing Lead-Out at LBA 51440 (C8F0h), lenght 0 blocks 12:33:41 #21 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:33:42 #22 Text 0 File DVDPlusRW.cpp, Line 718 Media-Format will be stopped after burning 12:33:53 #23 Text 0 File DVDPlusRW.cpp, Line 796 Media-Format is stopped successfully 12:33:53 #24 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 12:33:53 #25 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 12:33:53 #26 Phase 37 File dlgbrnst.cpp, Line 1800 Burn process completed successfully at 2.4x (3,312 KB/s) 12:33:53 #27 Phase 78 File dlgbrnst.cpp, Line 1800 Data verification started 12:34:18 #28 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 12:34:18 #29 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= Recorder needs eject between burn and verify. Auto reload. (Medium in drive: Unknown. Medium required by compilation: DVD.) 12:34:18 #30 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1306 Cannot mount the written CD "QSI DVDRW SDW-041 " (H:2, T:0) 12:34:18 #31 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1360 Status summary Total files=0, identical=0, different=0, inaccessible=0, skipped=0. 12:34:18 #32 Phase 81 File dlgbrnst.cpp, Line 1800 Data verification failed Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\atapi.sys': Ver=5.1.2600.1133 (xpsp2.020921-0842), size=87040 bytes, created 16/10/2002 18:31:10 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Does your computer only have 256K memory? Have you tried using DVD Shrink to output an iso image file and then use DVD Decrypter to burn that image file? How are you generating the files you are attempting to burn? What brand and model number is your burner? Is your burner's firmware updated?
Hmmm,several issues here that need to be addressed. As Laddyboy stated, your memory is VERY low, I would recommend another 256Mb to be added, this will improve your efficiency and allow for smoother data transferral. Your setup is to create multisession and no finalising, you should alter this to 'no multisession' and finalise, this will probably cure the fact that your burning and appear to have no data there. Nero is unable to correctly indentify your chosen media, this maybe down to older firmware or a low quality discs. What brand of media are you using, can you try an alternative brand? Failing that, as Laddyboy suggested, a firmware up date maybe required for your burner............. Let us know how you get on...............
hey i tryed to burn a dvd with dvd decrypter and i got a weird error msg and i have been unable to burn with any program and i just got my burner and its really frustrating in the log the msg said I 22:04:04 Writing Image... W 22:04:04 Failed to Write Sectors 2207424 - 2207455 - The semaphore timeout period has expired. and it went on for ages......... please help
gavin999, Update your Nero to 6.6 as you are using 6.3. As the others have stated the burner is not recognizing the blank media: " (Medium in drive: Unknown. Medium required by compilation: DVD.) " pez_05 , Your problem is that the computer and burner are not talking to each other. You are somehow having conflicts there. What burning programs are on your computer? Suggest you d/l a registry cleaner and clean the registry. Google for free registry cleaners and you will find some. We will start there and also when you reply please include the computers specs and include amout of ram, OS, burner name and model #
Thanks for your speedy response guys, Yes I am using 256k memory, I have given nero exclusive rights being the only running app, several times? If that helps? Specifications 32mb intbuilt graphics card. SIS 740 256K MEM Model * QSI SDW-041 Interface * ATAPI/E-IDE Access time * CD-ROM: 150 ms * DVD-ROM: 150 ms Read * DVD-ROM: 8x * CD-ROM: 24x Write * DVD+R: 4x * CD-R: 16x Rewrite * DVD+RW: 2.4x * CD-RW: 10 Ive also tried dvd shrink/decrypter, and many more burning apps? Im using a Packard Bell Easy Note(CL) its bearly 8 months old. Ive checked the site for updates or any relevant info to no avail. From what i can gather when I try to update the drivers, it states that no driver is needed, for this device. It concerns me that I can watch my personal movies on my restricted playstation 2, which is very fussy on what it plays. Yet I cant on my laptop with power dvd? and many more customisation tools to utilise. I must stress that had I known DVD+RWs were this problematic, i may have choosen a diff spec! I tried again earlier, got a write error? Im seriously considering cashing in my warranty while I still can. Im thinking it maybe a drive fault...........? Unless im told by yourselves otherwise of course. Any further suggesstions on firmware updates? Once again guys I apreciate your time and hope I can give back some time too. Thanks.
I use notebooks most of the time but I use both an external burner and an external hard drive. Laptop dvd burners in the past haven't been very good. You definitely need some more memory. Try different media. Your burner doesn't want to feed on what you're serving it. OK, I've visited some other forums. The consensus is that the QSI notebook burners are not very good and extremely picky about media. You'll have to try different brands until you find some that work for your burner.
I agree with laddyboy, burning on a notebook is very touchy, and especially with 222 of memory. I too use an external burner with mine, because it will at times overheat using the internal. If you really want to do this you will as suggested have to try different media, as your is really not liking what you are giving it.
thanks yeah i am using nero 6 and dvd decrypter My burner type is Pioneer dvr-109 external 16x max - + r 48x Max cd-r 6x max dvd-+ dual layer i am using microsoft xp home i think i have 256 ram is that all i need to give.. im not sure sorry thanks nick
@pez_05, i see you'd added some info, maybe try this too - download Nero info-tool from here - http://www.snapfiles.com/get/neroinfo.html Run it, note down the following, and paste here. Here's what mine shows - click on the drive tab, note down the firmware version click on configuration tab, note down the DMA fields, ie on or off it may be worth clicking on the aspi tab, and note down anything that might be missing if ASPI is listed as not installed, download ASPI 4.71 from here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm - then run it to install it you could post your own pictures like this - (i do this the same way, but i copy/pasted this from one of the moderators' posts) - Step 1: push ctrl + PrintScreen (above the insert button) Step 2: Open paint .. click start -> programs -> accessories -> paint Step 3: push ctrl + v Step 4: crop your image. I crop what I want to show -> cut it -> open new -> paste it. [bold]Crop only what you want to keep[/bold] Step 5: save as jpeg Step 6: Host the jpeg here: http://imageshack.us/ Also download dvdinfopro (free) and run a media info check on one of your discs you're burning with and post here
@pez_05 - try this anyway http://home.comcast.net/~bbmayo/DMA.html -it can't hurt. then do the other stuff..
If it is an external drive DMA settings are not used. The drive and the computer are having communication problems, somewhere in the driver.
Give more computer specs, name of computer, how old, which service pack, do you have USB 2 or 1.1. Do you have the latest firmware, did you just plug the drive in or was there software. Can you try plugging the drive into another computer to see if it works.
http://img137.echo.cx/my.php?image=new7gq.jpg http://img77.echo.cx/my.php?image=new12hg.jpg http://img77.echo.cx/my.php?image=new25ln.jpg please look creaky nd get back to me Thanks nick
