Hello, I bought and installed this drive with Nero 6 in July 2005 and it worked perfectly. But recently I bought 16X DVD-R discs from Memorex and process was failed (I use Shrink to create backup). Here is errorlog ********** Nero Recode 2 ********** Version: 2.1.1.18 Project type: Copy entire DVD Target size: DVD5 (2282925) Burn settings: Target: _NEC DVD_RW ND-3520A Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\cd_copy\new_cd (25139027968 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 22:08:42 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VMG Menus Vobs [10 vobus] 0.68MB -> 0.68MB [R 1.00] Video: 0.66MB, extra: 0.02MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.00MB [enabled] VTS_01 Menus Vobs [20 vobus] 0.20MB -> 0.20MB [R 1.00] Video: 0.16MB, extra: 0.04MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.00MB [enabled] VTS_01 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable] Video: 0.01MB, extra: 0.00MB Audio: 0 streams Subpicture: 0 streams VTS_02 Menus Vobs [45 vobus] 8.27MB -> 8.27MB [R 1.00] Video: 7.57MB, extra: 0.70MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 0.59MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 0.02MB [enabled] VTS_02 Title Vobs [784 vobus] 202.65MB -> 202.65MB [R 1.00] Video: 191.58MB, extra: 11.07MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 9.54MB [enabled] Subpicture: 0 streams VTS_03 Title Vobs [2362 vobus] 377.99MB -> 376.91MB [R 1.00] Video: 343.48MB, extra: 33.42MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 27.53MB [enabled] Subpicture: 2 streams 0. 0. English 1.28MB [enabled] 1. 1. French 1.08MB [disabled] VTS_04 Menus Vobs [278 vobus] 59.91MB -> 59.91MB [R 1.00] Video: 55.98MB, extra: 3.94MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 3.29MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 0.10MB [enabled] VTS_04 Title Vobs [12613 vobus] 2969.78MB -> 2604.16MB [R 1.00] Video: 2050.60MB, extra: 553.56MB Audio: 3 streams 0. 0. Dolby Digital 5.1-ch English 361.89MB [enabled] 1. 1. Dolby Digital 2-ch English 154.82MB [enabled] 2. 2. Dolby Digital 5.1-ch French 362.37MB [disabled] Subpicture: 2 streams 0. 0. English 12.21MB [enabled] 1. 1. French 3.25MB [disabled] VTS_05 Title Vobs [4509 vobus] 772.30MB -> 769.89MB [R 1.00] Video: 703.77MB, extra: 66.12MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 54.28MB [enabled] Subpicture: 2 streams 0. 0. English 3.03MB [enabled] 1. 1. French 2.40MB [disabled] VTS_06 Title Vobs [313 vobus] 72.64MB -> 72.64MB [R 1.00] Video: 57.61MB, extra: 15.03MB Audio: 2 streams 0. 0. Dolby Digital 5.1-ch English 10.09MB [enabled] 1. 1. Dolby Digital 2-ch English 4.33MB [enabled] Subpicture: 0 streams 22:08:42 File burn_dvdfiles.cpp, Line 1153 Compile DVD: begin copy 1 22:08:43 File NeroRecorderBase.cpp, Line 448 Writing to disc: DVD-R 22:08:43 File NeroRecorderBase.cpp, Line 462 Free capacity on disc: 2286444 sectors (2298496) 22:08:43 File burn_dvdfiles.cpp, Line 480 Compile DVD: burning 2286444 sectors (2097020 required) 22:08:43 File burn_dvdfiles.cpp, Line 657 Compile DVD: adjust target size to 4465.71MB (4095.74MB obtained) 22:08:43 File burn_dvdfiles.cpp, Line 525 Compiling DVD Volume started 22:08:43 File vob_record.cpp, Line 642 DirectBurn offset: VIDEO_TS.VOB 16 22:08:43 File burn_dvdfiles.cpp, Line 1059 Compile DVD: finished VMG Menus Vobs VMG Menus Vobs: Original 0.68MB -> Expected 0.68MB -> Output 0.68MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 10 Slide encoded = 0 StillImage encoded = 0 Output extra size = 0.02MB Source video size = 0.66MB Pictures Modified [I 0] [P 0] [B 0] 22:08:43 File burn_dvdfiles.cpp, Line 1059 Compile DVD: finished VTS_01 Menus Vobs VTS_01 Menus Vobs: Original 0.20MB -> Expected 0.20MB -> Output 0.20MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 20 Slide encoded = 0 StillImage encoded = 0 Output extra size = 0.04MB Source video size = 0.16MB Pictures Modified [I 0] [P 0] [B 0] 22:08:43 File NeroRecorder.cpp, Line 444 Burn failed (3) ----- Begin NeroAPI error log ----- 1A20-0105-0030-1765-5104-8622 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM Nero API version: 6.3.1.25 Using interface version: 6.3.1.11 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75DEA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-240B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3520A D: CDRom0 SAMSUNG CD-R/RW SW-240B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523056kB) Free physical memory: 321MB (328892kB) Memory in use : 37 Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.3.2006 NeroAPI 10:08:43 PM #1 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 10:08:43 PM #2 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 10:08:43 PM #3 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 10:08:43 PM #4 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:08:43 PM #5 Text 0 File DVDR.cpp, Line 2000 Recording mode: Sequential Recording Mode for Multisession 10:08:43 PM #6 Text 0 File Mmc.cpp, Line 20660 Set BUFE: supported -> ON 10:08:43 PM #7 Text 0 File DVDR.cpp, Line 2141 Start write address at LBA 0 DVD high compatibility mode: No 10:08:43 PM #8 Text 0 File Cdrdrv.cpp, Line 8230 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:08:43 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1073 Estimated filesystem size: 560 10:08:43 PM #10 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 2.4x (3,324 KB/s) 10:08:43 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1730 Buffering files started 10:08:43 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1451 Buffering VIDEO_TS.VOB 10:08:43 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2548 Finished buffering file VIDEO_TS.VOB of size 710656 bytes (347 sectors) 10:08:43 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2607 Finished writing file VIDEO_TS.VOB of size 710656 bytes (347 sectors) 10:08:43 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2620 Buffering files finished successfully 10:08:43 PM #16 SCSI -1046 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x03 0xB0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:08:43 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 751 Error reserving fragment (0) 10:08:43 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 3572 Disc info: Partitions: 0 10:08:43 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1903 Error reserving start segment 10:08:43 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 3572 Disc info: Partitions: 0 10:08:43 PM #21 Phase 179 File APIProgress.cpp, Line 273 Writing file to disc failed 10:08:43 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 3572 Disc info: Partitions: 0 10:08:46 PM #23 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=5.2.0.91, size=23724 bytes, created 10/2/2002 10:38:16 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 22:08:46 File burn_dvdfiles.cpp, Line 300 Compile DVD: exit
First thing let's edit out that serial # - it's begins w/ 1A and is in the log 2x. Don't need someone else getting it! Your Nero is a bit out of date. Update to these versions (package 1 and 2). http://httpdl1.usw.nero.com/Nero-6.6.0.18_no_yt.exe (package 1) http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe (package 2) Your drive can use a firmware update also - latest version is 3.05: http://www.de.nec.de/software/1926_FW_ND-3520A_win305.zip Decent media - one of Memorex better manufacturers. I would aoid Memorex though and look for Verbatim or Made in Japan Fuji,Sony or Maxell. I would also increase the burn speed - try 4x. Roxio can conflict w/ Nero - uninstall it and run the roxio zapper. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
It shouldn't, I have the OEM as well and it upgraded fine. You have a license, so it be download and install. Simple. Edit your first post and take our your Nero Serial number like blinkie suggested. Cheers.
I'd like to use Nero Burning ROM 6 based on advice which I got but I couldn't find it. Anybody knows why?
@mzektser When you open Smart Start on the left under applications you should see Nero Burning rom. Did you upgrade to the 6.6.0.18 version?
Yes, I loaded nero-6.6.0.18_no_yt.exe and now NERO OEM is 6.6.0.18 Under application I could see Nero Express NeroVIsion Nero Backup Nero cover Nero Showtime Nero Recode Nero Media Player Nero PhotoShow Michael
Did you install package 1 and package 2? Kinda odd why burning rom isn't there. Did you have it before?
You can try updating package 2 from link above but doubt this will add burning rom since it's in package 1. Really strange that your oem version will give you NeroVision and Recode but not burning rom. Normally you just get package 1 and nothing from package 2. Depending on what you want to you can use Express or Nero Vision. One thing about Nero is there is usual a few apps in it that will do the same thing.
Yes Recode will on non copy protected dvd's. Same developer for Shrink and Recode - both very similar. To do copy protected dvd's with Recode you can run AnyDVD in the background to remove the copy protection. Or rip the files to your hard drive w/ something like DVDFab Decrypter then process thru Recode. Since Shrink is no longer updated it's best to have AnyDVD or a free app like DVDFab Decrypter to handle what it can't. Now since you don't have burning rom Shrink won't auto burn w/ Nero. So you can either open the files in Nero express and burn. Or download DVD Decrypter (free)which Shrink will also autoburn with.
