Failed burn with nero

Discussion in 'DVDR' started by haggisuk, Jul 7, 2005.

  1. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I have tried burning two different compilations to dvd today and i used dvd decrip for one and nero for the other, but both sessions the burn process did not get past the lead in, i am using a sony dru 710a i thought there might be a problem with the burner so i upgraded to the latest firmware but i still have the same problem...

    Please help..... there has never been any problems burning dvd's before and i'm at a loss with what to do

    Thanks
     
    haggisuk, Jul 7, 2005
    #1
  2. cougar_ii

    cougar_ii Regular member

    Joined:
    Aug 19, 2004
    Messages:
    1,506
    Likes Received:
    0
    Trophy Points:
    46
    Hi there,

    Provide us a full nero log (Remove your Serial Number) and from there, it will help us see what is going on.

    What brand of media are you using ?

    http://www.dvdinfopro.com can provide you with the MEDIA ID.

    What speed are you burning at ?
     
    cougar_ii, Jul 7, 2005
    #2
  3. pw-pro

    pw-pro Guest

    Nero worked perfectly but after updating to 6.6.0.14 I have the same problem "could not write end-of-disk ...."

    I would like to atach log file but how can i do this?
    Anybody can help?

    Peter

    LOG:
    -----------------------------------------
     
    pw-pro, Jul 7, 2005
    #3
  4. Mort81

    Mort81 Senior member

    Joined:
    Jun 10, 2004
    Messages:
    4,030
    Likes Received:
    0
    Trophy Points:
    116
    Go into program files, open the ahead folder, open nero folder, locate and open nero history, scroll down to last burn, copy and paste. Be sure to xxx out the serial number.
     
    Mort81, Jul 7, 2005
    #4
  5. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    This is the log form a simulation i tried in nero just now, again its seems to stick at the lead in and the says illegal disc.

    Any ideas?


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 21:18:06
    Nero version: 6.3.1.12
    Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 1 TA 0 - 6.3.1.12
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-710A >Version: BYX4 - HA 1 TA 0 - 6.3.1.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-710A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 118MB (121276kB)
    Memory in use : 75 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.7.2005
    UDF/ISO compilation
    17:44:21 #1 Phase 112 File dlgbrnst.cpp, Line 1836
    DVD-Video files reallocation started

    17:44:21 #2 Phase 114 File dlgbrnst.cpp, Line 1836
    DVD-Video files reallocation completed (no file modified)

    17:44:21 #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    17:44:21 #4 Phase 111 File dlgbrnst.cpp, Line 1836
    DVD-Video files sorted

    17:44:21 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    17:44:21 #6 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-710A running

    17:44:21 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:44:21 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:44:21 #9 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-at-once, using DVD media

    17:44:21 #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 2225455 (494:32.55, 4346MB)

    17:44:21 #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    17:44:21 #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
    Disc Manufacturer: MAM4XG - 02
    Disc Application Code: 64, Disc Physical Code: 193

    17:44:21 #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:44:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2225456 (2225456) = #2225456/494:32.56
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225456 blocks [SONY DVD RW DRU-710A ]
    --------------------------------------------------------------

    17:44:22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4557733888, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2225456 | lead-out | 1 | 0x00 | 0x41

    17:44:22 #16 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    17:44:22 #17 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    17:44:22 #18 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    17:44:22 #19 Phase 32 File dlgbrnst.cpp, Line 1836
    Simulation started at 4x (5,540 KB/s)

    17:44:22 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:44:22 #21 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:48,376 (828376ms) -> OK

    17:44:22 #22 Text 0 File DVDR.cpp, Line 1833
    Recording mode: Sequential Recording Mode

    17:44:22 #23 Text 0 File Mmc.cpp, Line 20173
    Set BUFE: Power-Burn -> ON , Generic write control : ON

    17:44:22 #24 Text 0 File DVDR.cpp, Line 1974
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:44:22 #25 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:44:23 #26 Text 0 File Cdrdrv.cpp, Line 1293
    17:44:23.977 - SONY DVD RW DRU-710A\H1 T0 : Queue again later

    17:48:14 #27 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03DC0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x22 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    17:48:14 #28 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    17:48:14 #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    17:48:14 #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    17:48:14 #31 Text 0 File DVDR.cpp, Line 2201
    EndDAO: Last written address was 8863

    17:48:14 #32 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    17:48:14 #33 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    17:48:19 #34 Phase 34 File dlgbrnst.cpp, Line 1836
    Simulation failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 03/07/2005 17:34:26 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    haggisuk, Jul 7, 2005
    #5
  6. Mort81

    Mort81 Senior member

    Joined:
    Jun 10, 2004
    Messages:
    4,030
    Likes Received:
    0
    Trophy Points:
    116
    What is the media code and brand of discs you are useing?

    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    Doesn't like or not recognizing the media. Should be some letters and/or numbers here as well.
     
    Mort81, Jul 7, 2005
    #6
  7. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    The dvd's i'm using are Emtec 4.7gb they are german but as to quality i don't know a good one from a bad one, but i have been using this same batch of dvd's for ages with no problems, but the last test i did was simulation only, not a proper burn because i don't want to knacker all my dvd's
     
    haggisuk, Jul 7, 2005
    #7
  8. cougar_ii

    cougar_ii Regular member

    Joined:
    Aug 19, 2004
    Messages:
    1,506
    Likes Received:
    0
    Trophy Points:
    46
    Hi there,

    You do have the latest firmware for your drive.

    As for Nero, the latest is v6.6.0.14

    From your version to the latest, I'm not sure if there's any fix that might help, but I think it would not hurt trying the latest version.

    Have you tryed at 2x and see if it helps ?

    Father in law has some cheap media.
    I can burn 5 without a problem, then bomb 2 in a row.
    They are real bad.

    http://www.dvdinfopro.com will tell you the Media ID.


     
    cougar_ii, Jul 7, 2005
    #8
  9. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I just tried burning another disk with dvd shrink and same thing, that's 7 dvd's dead, i'll try the new version of software and see what that does, this is the log form dvd shrink-

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 21:18:06
    Nero API version: 6.3.1.12
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 1 TA 0 - 6.3.1.12
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-710A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 134MB (137556kB)
    Memory in use : 71 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.7.2005
    NeroAPI
    19:12:30 #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    19:12:30 #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    19:12:30 #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    19:12:30 #4 Text 0 File Reader.cpp, Line 118
    Reader running

    19:12:30 #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    19:12:30 #6 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-710A running

    19:12:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    19:12:30 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    19:12:30 #9 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    19:12:30 #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 2225455 (494:32.55, 4346MB)

    19:12:30 #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    19:12:30 #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
    Disc Manufacturer: MAM4XG - 02
    Disc Application Code: 64, Disc Physical Code: 193

    19:12:30 #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:12:30 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2225456 (2225456) = #2225456/494:32.56
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225456 blocks [SONY DVD RW DRU-710A ]
    --------------------------------------------------------------

    19:12:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4557733888, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2225456 | lead-out | 1 | 0x00 | 0x41

    19:12:31 #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    19:12:31 #17 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    19:12:31 #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    19:12:31 #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    19:12:31 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:12:31 #21 Text 0 File DVDR.cpp, Line 1833
    Recording mode: Sequential Recording Mode

    19:12:31 #22 Text 0 File Mmc.cpp, Line 20173
    Set BUFE: Power-Burn -> ON , Generic write control : ON

    19:12:31 #23 Text 0 File DVDR.cpp, Line 1974
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    19:12:31 #24 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    19:13:19 #25 Text 0 File Cdrdrv.cpp, Line 1293
    19:13:19.421 - SONY DVD RW DRU-710A\H1 T0 : Queue again later

    19:17:07 #26 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00DD0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x21 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    19:17:07 #27 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    19:17:07 #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    19:17:07 #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    19:17:08 #30 Text 0 File DVDR.cpp, Line 2201
    EndDAO: Last written address was 8543

    19:17:08 #31 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    19:17:08 #32 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    19:17:08 #33 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 03/07/2005 17:34:26 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    haggisuk, Jul 7, 2005
    #9
  10. Mort81

    Mort81 Senior member

    Joined:
    Jun 10, 2004
    Messages:
    4,030
    Likes Received:
    0
    Trophy Points:
    116
    I would try some different good quality, proven media. That is the first and easiest place to start. I've never heard of the media you're useing so can't comment but verbatum, taiyo yuden, sony, maxell, or fuji (made in japan) would be some good choices. Run your media through this free proggy http://dvd.identifier.cdfreaks.com/ and tell us the manufacturer and ID.

    Mort
     
    Mort81, Jul 7, 2005
    #10
  11. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I have just installed the latest version of nero and i still have the same problem, i just don't understand, what could be wrong because from day one i never have had any burn problems but now i can't burn a dvd, this is the media info....
    ----------------------------------------------------------------------------
    Unique Disc Identifier : [DVD-R:MAM4XG02]
    ----------------------------------------------------------------------------
    Disc & Book Type : [DVD-R] - [DVD-R]
    Manufacturer Name : [Manufacturing Advanced Media Europe S.A.]
    Manufacturer ID : [MAM4XG02]
    Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
    ----------------------------------------------------------------------------
    [ DVD Identifier - http://DVD.Identifier.CDfreaks.com ]
    ----------------------------------------------------------------------------

     
    haggisuk, Jul 7, 2005
    #11
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    looks like the guys already stormed your Nero log, i can't see anything they haven't covered. Also the others advised to use better media. I recommend Verbatim [bold]datalifeplus[/bold], not only are they top notch media that cost no more than utter rubbish media, Sony drives (ie rebadged Lite-on drives) love Verbatim , but then again any drive would love them..
     
    creaky, Jul 7, 2005
    #12
  13. Bigfatboy

    Bigfatboy Regular member

    Joined:
    Feb 7, 2005
    Messages:
    351
    Likes Received:
    0
    Trophy Points:
    26
    i agree with the post above i have the same burner and firmware and i use verbatims and ty's and not one coaster but i only use dvd+r's and booktype them to dvd-rom. in nero goto nero toolkit, choose cd-dvd speed, now click on the extra tab, choose bitsetting, in new setting choose dvd-rom, click on set. this will automatically set dvd+r's to dvd-rom when you burn. hope this helps.

    if you use decrypter to burn it also has a booktype feature for sony's(rebadged lite-on)
    click on the book in the bottom right corner, click on lite-on tab, change for next write, then select dvd-rom,click change, hit ok and your done

    this is only for dvd+r's and when set to dvd-rom all my backups have played on several different brands and older models

    peace
     
    Last edited: Jul 7, 2005
    Bigfatboy, Jul 7, 2005
    #13
  14. haggisuk

    haggisuk Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for all the info, i'll try some new media, but for now i have to go offshore, so it will be a few days before i'm back and able to try, i'll post my progress when i get back.

    Tanks again.

    Del
     
    haggisuk, Jul 7, 2005
    #14

Share This Page