i have a starview 2,genuine box, and the green line goes across to the end and stays lit at the end when i switch it on. i have flashed with all the latest software but it just keeps going to that last bit of the green line. can anybody help?
Sometimes A reflash will help- Just To be sure though, sometimes the reload will wipe channel history so it will be stuck on intall menu or set up if this is the case to proceed through set up go tell it to search for channels to then it moves to numbers( ie:Channles available) so before you reload make sure connections are good cable in the correct input and the scart is the bottom one Then go through your av channels on TV Of course if you got nothing at ths point ( you should have a menu ) then i would check the firmware and reload it hope this helps
i didnt flash it at all, i was just going to put the new cod*s i after it was switched of in belfast yesterday. just flashed it with the new 4.55 and logo files there now and it went through the line and then flashed on and switched itself of
does it just get stuck before it boots every time. factory reset and try 4.57 from http://eko.4shared.com if it still doesn't work after that try 8.02 http://www.megaupload.com/?d=PFCZORT9 this is the only place i can find 8.02 and you might have to use a program the link will give you. if you have trouble let me know and i'll upload it. if it still doesn't work from there it's not a good sign.
