[GUIDE]:UPMS-V4 (Sapphire) Installer **DO NOT USE WITH CFW 4.01M33 AND ABOVE!!**

Yes, only if you run the steps.
It should be step 1 - IPL.

Step 2 - This is only if you don't have a battery in service mode(JigKick). If you have your battery in service mode then you can skip step 2.

Step 3 - The installation. That's where you get to choose to install HELLCAT, Joker Menu or both of them.

Step 4 - I didn't use it so I don't have a clue.

QUESTION:
dEEz_nUtz
I close my PSP when it takes like half an hour to install. Then I open it again and it says "done". Is that OK?

 

HAVE NO IDEA>...
Sorry..

 

This stinks... I already have an ultimate magic stick but tried copying all the files to another 1gb memory card to make another magic stick but it is not working... Any suggestions.

 

Hi, can any one confirm if this works on new slim and lite on 3.71 ofw?????

i'm trying with my battery which worked on 3.60 do i need to re-do battery?

when i switch on with UPMS and pandora i get no ms light but screen does flash, when i release L there is no menu....is it not possible or am i doing something stupid???????

thank you

 

sorry to post again but wont be able to get back on line for a while,

if anyone can help it would be much appreciated.....

i have followed all steps in guide using fat 340-oe psp, i already had a pandora's battery which worksed fine on 3.60 ofw slim.

using this battery and my the mem stick i've just created i put in my friends 3.71ofw slim holding down L, the screen flashes then goes blank, no memcard light but power light stays on.

then nothing, no menus at all

The mem card is original sony 1gb, and battery is original 1800 as well.

Only thing i can think of is i need to re-do battery with this software, will this help?

i've gone through steps 3 times now just in case but nothing pleeeeeeeeeeeeeeeeeeese help!!!

alos i noticed the firmware files are now being renamed with dot in - ie 3.40.PBP on another guide i have seen the names were 340.PBP no dot in which is correct???

wont be on line for about 20hrs but any help really appreciated and keep up the great work everybody!!!!!!!!!!!!

thanks

Alun

 

You can't just copy the files... the stick has to be made using a PSP.

 

when you say close, do you mean you shut it off, or put it in sleep mode? If it says 'done' then it should be good-the only way to make sure is test it out...

@N01NOob -did you get your issue sorted? You can use both Hellcat and Joker providing you selected the 'multi-IPL' option on step #1

@carp940-I made my UPMS on a psp running 3.52M33-4 with a custom theme on the flash, and it worked fine...
I would recommend getting a spare battery and converting to pandora before you have a brick on your hands and no way to convert it..Also you cannot make a battery on OFW, so your best bet is to go back and convert it while you still have cfw running...You can always convert it back if need be...
Another trick you can do is insert the UPMS and the pandora battery, and rather than hold down the L trigger, just let it boot into the XMB-from there you can switch the memory stick to one you use normally for games, mp3's, etc...

@rayrod354-It wont work because the other memory stick does not have an IPL written to it-but something you can try is running the UPMS program on your other memory stick to write the IPL to your memory stick (step#1), then copy/paste the files you have on your other memory stick to the new one.

@alunb-the battery you have currently will work fine, you just need to make sure that when you run the UPMS program, that you write the correct IPL from step #1 (recommended: 'multi-IPL') then when you place the firmware eboots onto your memory stick-make certain that they are named 150.PBP, 340.PBP, and 371.PBP-and dont have a double '.PBP' extension (ex: 1.50.PBP.PBP)-You can remedy this by going to a windows explorer window on your computer- go to: >tools>folder options>'view' tab> then uncheck "Hide Extensions for known file types"..

I would do that, then try running the UPMS program again to get the files on the memory stick.

 

Yes, I placed it in sleep mode.
I can't test it because if I take out my 4GB, it can crack and might break. So I'll have to give it a go at the last minute or buy a card reader...

EDIT:OK, I'm testing it out - wish me luck
EDIT: Worked out fine(relieved lol)

 

i've got a problem with the upms.cso. It just isn't showing up when I place it in the ISO folder. I am running 3.52m33-4.

 

Hi all, UPMSProject have now release the latest version of UPMSInstaller (Emerald) and Ultimate Loader.

This comes in 2 versions:
A full CSO version and an EBOOT (Limited Version) all utilities need to be installed by you the user for the LV version.

You can download it from here.

UPMS Project

Hope you enjoy.

 

Are you having issues with your other game iso/cso's?
Is the ISO folder in the root of your memory stick? (ie: ms0:/ISO)and not within the ms0:/PSP/GAME or GAME150 folders?

 

ISO>>>upms
PSP
UPDATE.PBP
1.50.PBP
3.40.PBP
3.70PBP

This is what the root of my ms looks like. I haven't tried playing games on the ms because it is my friends ms, But my ms has games and it plays them fine.

 

One of your PBP's is wrong, it should be 371.PBP and named like that without the "." so you should have 150.PBP, 371.PBP, you can do away with the 340.PBP.

But download our latest version from our website, we released today.

The link is a couple of posts back or see OverfiendX's sig.

ghost

 

the 3.70 is a typo, but is the only reason that the cso isn't showing up is because I have the 3.70 and 1.50?

 

I checked and no games show up on my buddies memory stick. What could be the problem?

 

That's the sort of thing 1.5 firmware does, how big is the CSO and where did you download it from.

If you got it from somewhere other then our official site I would re-download it, then you know you have the correct version and poss not a moddied 1.

 

the cso is just 130mb and it is miami vice, but also upms doesn't show up either. My cfw is 3.52mm3 and with my ms all of the games show up, but when I use my friends none do. Also, his card isn't fake because magic gate is supported.

 

So do EBOOTS show?

 

I don't think that there are any EBOOTs on his psp. just upms.cso in the ISO, and in the root is 150.PBP, UPDATE.PBP and 371.PBP.

 

I think that my whole problem is just the memory stick for some reason. I'll try and convince my friend to buy a new one from like gamestop because I think that he has store credit.