[GUIDE]:UPMS-V4 (Sapphire) Installer **DO NOT USE WITH CFW 4.01M33 AND ABOVE!!**

i think you have not yet done the 'Magic memory stick' but your pandora battery is done...so you have to do the 'Magic memory stick' again..

 

You need to use the Format Memory Stick option within UPMS, removing your card when asked to do so by it.
The boot partition is to small to hold the custom IPL, that is why it's corrupting.

Please when people have a problem you must post more information like the PSP you are using, people who are trying to help you out don't know if you using a Fat or Slim & Lite and these both have different boot procedures.

UPMSInstallerV3r3 was released the other day so I would use this version now.

Thanks

 

hi guys i know how to use this and have used it for a couple of psps to get m33 firmway on it and i was installing themes on my psp using the flash 0 and i did create a backup and on theme said not enough memory so im like oh ok so went to put my backup bavck on and it wouldnt let me said not enough memory sop i formatted it and put the whole backup back on to flash 0 and started to put the theme on great all went on fine but wen i restarted my psps it was bricked and trying to use this n no luck sofar ?? is there anything other if its a flash0 brick i cannot get into recovetrymode

(so far i managed to get to a black screen with a faint light no menu in pandora yet) any help ?

 

Do you have a Fat or Slim psp, also do you have a pandora bat and ms set.

If you do have all of the above and your on a slim then do this.

Remove bat
put mms in slot
push power switch down to hold
hold left trigger
insert battery
Slim should startup then shutdown.
Remove bat
push power switch to normal
hold left trigger
insert battery
ultimate loader should now boot.

 

hi there thanks for the help havent tried this yet but i have a fat psp so far i have managed to do 6 psps using upms one of them was a slim one and had no problem what so ever but now i think i mite have done something wrong cos i also tried to use it on my mate fat psp wich is not bricked just tocheck if it was my psp and it isnt uploading on his either although i have re installed pandora on to the memory stick ? i really dont have a clue now ?

 

when i followed the link in your first post for the installer, i get a message saying the download is invalid.

here : http://www.upms-project.com/modules.php?name=Downloads&op=getit&lid=65

anywhere else i could get the file ??

is it the : UPMSInstallerV3r3

here : http://www.upms-project.com/modules.php?name=Downloads&cid=32

or would it be the Pandoras GUI v1.5 ?? as i see you mention that in your first post.

 

the link in your post is just taking me to the AD homepage.

 

How are we supposed to make a magic stick if CFW is required? And to downgrade, a pandora battery is needed as well, which also requires CFW. and the pandora requires the magic stick, does it not?

I guess my question is, how is it possible to downgrade an official FW PSP if everything requires CFW?

 

Go HERE for a guide on how to do it using official FW

 

Got it, thanks.

 

no probs mate.

 

Make sure the WLAN switch is turned off, I have found a few probs with UL not showing up if this is turned on, might be something to do with Hellcats Menu.

 

hmm. i did everything. i get to the part i insert the mem, hold left trigger, insert bat. turns on starts flashing. no menu shows up any idea?>

 

err not letting me edit..

anyways.

just want to add i made everything with a slim, and put it in a phat psp casue its bricked and it didn't work. the things do flash but screen stays black.

so whats going on x.x?

 

I just followed this guide and everything worked perfectly! I used a PSP with firmware 3.03 OE-C to create the Pandora battery and magic stick. Next I upgraded a second PSP with OFW 3.72 to 3.80 M33-5 and then also upgraded the first PSP directly to 3.80 M33-5 as well!

 

I have used this guide several times and have successfully downgrade 2 slims and 3 fat psp.

This is the problem:

After I make the pandora battery and MS. I insert my MS first, hold L down and then put battery into PSP FAT. THE PSP SCREEN GETS STUCK ON THE ULIMATE LOADER SCEEN, I CANNOT MOVE THE CURSOR like it froze.

I tried this on another fat and the cursor successfully. The other PSP is working fine.

Sny suggestions

 

I kept getting the "memory card cannot be read" error after installing the UPMS, which lead to the installer not loading on the psp i.e. black screen with just green light. I know quiet alot of people are getting this problem.

I solved it by making sure my psp is plugged into the ac adapter before I did step 3 of the installer. Now it works for me

Hope that helps everyone.

 

Anyone have a clue as to what is going on?

 

I'm back

Anyways, I want to ask, if I selected NO, for installing UPDATE.PBP, does the UPDATE.PBP (1.50 EBOOT?) go into the root of the MS? Thanks.

 

hello there i am trying to go from 3.8 to 3.9 ,i have done everything you stated in your thread ,i have moved all the files to the relevant folders ,but how do i update now i have moved the files?

solderit