I run 4 dw1655 burners on my rig and have never had a problem till the last month or so ... one burner was giving coasters quite often, so I sent it in for a new one ... and it was replaced with a brand new unit ... now the new unit in the same location is doing the same thing ... good media ... ty's, good burners,dma's all on, powerful rig ... what am I missing? I do notice the signal light on the front of it is a little dimmer than the rest... Ill replace the ribbon if the log is good.... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'D:\programs\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 3:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <BENQ DVD LS DW1655 (3/1)>Version: BCDB - HA 1 TA 3 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder Recorder: <BENQ DVD LS DW1655 (2/1)>Version: BCDB - HA 1 TA 2 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder Recorder: <BENQ DVD LS DW1655 (1/1)>Version: BCDB - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder Recorder: <BENQ DVD LS DW1655 (0/1)>Version: BCDB - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <BENQ DVD LS DW1655 >Version: BCDB - HA 1 TA 2 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 0 ID 0 DMA: On CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 0 ID 1 DMA: On CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 1 ID 1 DMA: On DiskPeripheral : WDC WD2500JS-00MHB0 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === BENQ DVD LS DW1655 E: CDRom3 BENQ DVD LS DW1655 F: CDRom2 BENQ DVD LS DW1655 G: CDRom1 BENQ DVD LS DW1655 H: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096368kB) Free physical memory: 1670MB (1710984kB) Memory in use : 18 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.9.2006 UDF/ISO compilation 10:12:12 AM #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 10:12:12 AM #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 10:12:12 AM #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:12:12 AM #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 10:12:12 AM #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 122880KB of Memory 10:12:12 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 10:12:12 AM #7 Text 0 File Writer.cpp, Line 113 Writer E: BENQ DVD LS DW1655 running 10:12:12 AM #8 Text 0 File Writer.cpp, Line 113 Writer F: BENQ DVD LS DW1655 running 10:12:12 AM #9 Text 0 File Writer.cpp, Line 113 Writer G: BENQ DVD LS DW1655 running 10:12:12 AM #10 Text 0 File Writer.cpp, Line 113 Writer H: BENQ DVD LS DW1655 running 10:12:12 AM #11 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:12:12 AM #12 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:12:12 AM #13 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:12:12 AM #14 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:12:12 AM #15 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:12:12 AM #16 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:12:12 AM #17 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2048543 (455:13.68, 4001MB) 10:12:12 AM #18 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:12:12 AM #19 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: BENQ DVD LS DW1655 (3/1), Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 10:12:12 AM #20 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:12:12 AM #21 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2048543 (455:13.68, 4001MB) 10:12:12 AM #22 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:12:12 AM #23 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: BENQ DVD LS DW1655 (2/1), Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 10:12:12 AM #24 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:12:12 AM #25 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2048543 (455:13.68, 4001MB) 10:12:12 AM #26 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:12:12 AM #27 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: BENQ DVD LS DW1655 (1/1), Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 10:12:13 AM #28 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:12:13 AM #29 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2048543 (455:13.68, 4001MB) 10:12:13 AM #30 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:12:13 AM #31 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: BENQ DVD LS DW1655 (0/1), Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 10:12:13 AM #32 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:12:13 AM #33 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2048544 (2048544) = #2048544/455:13.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2048544 blocks [E: BENQ DVD LS DW1655] -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2048544 blocks [F: BENQ DVD LS DW1655] -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2048544 blocks [G: BENQ DVD LS DW1655] -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2048544 blocks [H: BENQ DVD LS DW1655] -------------------------------------------------------------- 10:12:13 AM #34 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: BENQ DVD LS DW1655] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4195418112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2048544 | lead-out | 1 | 0x41 | 0x00 10:12:13 AM #35 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: BENQ DVD LS DW1655] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4195418112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2048544 | lead-out | 1 | 0x41 | 0x00 10:12:13 AM #36 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: BENQ DVD LS DW1655] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4195418112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2048544 | lead-out | 1 | 0x41 | 0x00 10:12:13 AM #37 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [H: BENQ DVD LS DW1655] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4195418112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2048544 | lead-out | 1 | 0x41 | 0x00 10:12:13 AM #38 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:12:13 AM #39 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:12:13 AM #40 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:12:13 AM #41 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:12:13 AM #42 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 10:12:13 AM #43 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 10:12:13 AM #44 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 10:12:13 AM #45 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 8x (11,080 KB/s) 10:12:13 AM #46 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:12:13 AM #47 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:12:13 AM #48 Text 0 File MMC.cpp, Line 21611 Set BUFE: Seamless Link -> ON 10:12:13 AM #49 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:12:13 AM #50 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:12:13 AM #51 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:12:13 AM #52 Text 0 File MMC.cpp, Line 21611 Set BUFE: Seamless Link -> ON 10:12:13 AM #53 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:12:13 AM #54 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:12:13 AM #55 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:12:13 AM #56 Text 0 File MMC.cpp, Line 21611 Set BUFE: Seamless Link -> ON 10:12:13 AM #57 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:12:13 AM #58 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:12:13 AM #59 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:12:13 AM #60 Text 0 File MMC.cpp, Line 21611 Set BUFE: Seamless Link -> ON 10:12:13 AM #61 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:12:13 AM #62 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:26:04 AM #63 SPTI -1135 File SCSIPassThrough.cpp, Line 323 F: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1B 9E 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C Buffer x06d80000: Len x10000 0x00 00 01 BA 44 2F 85 2E DC C5 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 ED D3 2D 0E 53 65 B7 2D 94 0xBA 52 99 A3 EB 36 78 15 15 A8 62 C5 03 4D F9 EC 10:26:04 AM #64 CDR -1135 File Writer.cpp, Line 302 Write error F: BENQ DVD LS DW1655 10:26:42 AM #65 Text 0 File WriterStatus.cpp, Line 116 <G: BENQ DVD LS DW1655> start writing Lead-Out at LBA 2048544 (1F4220h), length 0 blocks 10:26:42 AM #66 Text 0 File WriterStatus.cpp, Line 116 <H: BENQ DVD LS DW1655> start writing Lead-Out at LBA 2048544 (1F4220h), length 0 blocks 10:26:44 AM #67 Text 0 File WriterStatus.cpp, Line 116 <E: BENQ DVD LS DW1655> start writing Lead-Out at LBA 2048544 (1F4220h), length 0 blocks 10:26:44 AM #68 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:26:44 AM #69 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2048543 10:27:08 AM #70 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 1809919 10:27:08 AM #71 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2048543 10:27:09 AM #72 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2048543 10:27:09 AM #73 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I've checked your log and it looks pretty decent, except 2 things needed to be done. That version seems to have more bugs, so try to update to the latest Nero 7.5.1.1 or at least an older version 7.0.8.2. Now uninstall your current Nero 7.0.1.2 and run this clean tool, http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install the most stable version of Nero 7.0.8.2 available from here http://www.filehippo.com/download_nero_7_premium/?845 Your current firmware is BCIB, go here http://forum.rpc1.org/dl_firmware.php?download_id=2224 and download it to update on your burner's firmware. Good media here, Taiyo Yuden is top notch, so it's definitely the "firmware" for sure. Again, see above reply. Seems like current firmware can't handle the MID or the media. Update burner's firmware, then try to burn again to see if you'll get any luck/successful burned.
Another thing: When's the last time you de-fragged your HD(s)? If it's been awhile, or if you use your computer a lot, defrag, reboot and see if that helps. It's helped a few people before, to do this. Good luck!
As long as you got it from a reputable source. The no-name flea market discs often ID as TYG02... they aren't.
the logfile looks o.k. no obvious problems i can see. have you checked your power supply? mine was failing about one year ago had similar problems with one of my drives. hope this helps.
media is good... from supermedia ... I will update the firmware and c if it helps... thank you.... I might pickup clone dvd for burning too, but Ive heard it doesnt support multable burners? is that true?
