Hi guys my name is John and im kinda new to both ur site and burning/Copying dvds.I was wondering if u guys can help me out as im having problems trying to burn a dvd on both img burn and roxio easy cd and dvd.First i use dvd shrink to encode the dvd and get the image but if i go to burn it on roxio it comes up with this error Sense: 05 ASC: 26 ASCQ: 00 (Command 55) ------------------------------------------------------- Px.dll: 3.4.45.500 PxAFS.DLL: 3.4.45.500 pxdrv.dll: 1.2.3.0 PxMas.dll: 3.4.45.500 PxSFS.DLL: 3.4.45.500 PxWave.dll: 3.4.45.500 pxwma.dll: 1.0.0.3 and it says there was an error writing to the disc.Now if i try through img burn it comes up with this HP DVD Writer 300c 9h04 (ATA) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: No (Started) Supported Write Speeds: 2.4x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Physical Format Information (ADIP): Disc ID: INFODISC-A10-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: INFODISC-A10-01 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Current Format Capacity: Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) Preferred Format Capacity: Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) Maximum Format Capacity: Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) and nothing happens when i try to write to the disc.now if i go to build mode it tells me that i need to convert the file to udf because its too big.My computer is a hp pavilion a522n and im running the dvd writer that came with it.Please help me out dont know what else to do was looking around ur site for answers but cant seem to find any would like somebody to guide me in the right direction.Hope all the info i gave u helps any help would be appreciated.Thanks John
Hi, 1) set output of dvd shrink to default 4464 Mb 2) output dvd shrink to iso 3) burn said iso with Imgburn Jo
Hey jo thanks for the reply it really helped came across another problem after my writer tried to burn this is what came up: io error device:[1:0:0]hp dvd writer 300c 9h04(e)(ata) scsi status :0x02 interpretation:Check condition cdb:28 00 00 00 00 05 00 00 01 00 Interpretation:Read (10)Sector 5 Sense area:70 00 05 00 00 00 00 12 00 00 00 00 21 00 00 00 00 00 00 01 02 03 04 05 Interpretation:logical block address out of range Read in another forum that somebody else was having the same problem and that they needed to update firmware but i tried to find an update and couldnt find one.would it be easier if i just go and get another dvd cd writer.Thanks John
